Re: [PATCH 1/2] dt-bindings: PCI: qcom: Add SM8550 to binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 16 Nov 2022 at 14:36, Abel Vesa <abel.vesa@xxxxxxxxxx> wrote:
>
> Add the SM8550 platform to the binding.
>
> Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
> ---
>  .../devicetree/bindings/pci/qcom,pcie.yaml    | 96 +++++++++++++++++++
>  1 file changed, 96 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
> index 54f07852d279..efa01a8411c4 100644
> --- a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
> @@ -34,6 +34,8 @@ properties:
>        - qcom,pcie-sm8250
>        - qcom,pcie-sm8450-pcie0
>        - qcom,pcie-sm8450-pcie1
> +      - qcom,pcie-sm8550-pcie0
> +      - qcom,pcie-sm8550-pcie1
>        - qcom,pcie-ipq6018
>
>    reg:
> @@ -92,6 +94,10 @@ properties:
>    power-domains:
>      maxItems: 1
>
> +  enable-gpios:
> +    description: GPIO controlled connection to ENABLE# signal
> +    maxItems: 1
> +
>    perst-gpios:
>      description: GPIO controlled connection to PERST# signal
>      maxItems: 1
> @@ -187,6 +193,8 @@ allOf:
>                - qcom,pcie-sm8250
>                - qcom,pcie-sm8450-pcie0
>                - qcom,pcie-sm8450-pcie1
> +              - qcom,pcie-sm8550-pcie0
> +              - qcom,pcie-sm8550-pcie1
>      then:
>        properties:
>          reg:
> @@ -601,6 +609,92 @@ allOf:
>            items:
>              - const: pci # PCIe core reset
>
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - qcom,pcie-sm8550-pcie0
> +    then:
> +      properties:
> +        clocks:
> +          minItems: 11
> +          maxItems: 11
> +        clock-names:
> +          items:
> +            - const: pipe # PIPE clock
> +            - const: pipe_mux # PIPE MUX
> +            - const: phy_pipe # PIPE output clock
> +            - const: ref # REFERENCE clock
> +            - const: aux # Auxiliary clock
> +            - const: cfg # Configuration clock
> +            - const: bus_master # Master AXI clock
> +            - const: bus_slave # Slave AXI clock
> +            - const: slave_q2a # Slave Q2A clock
> +            - const: ddrss_sf_tbu # PCIe SF TBU clock
> +            - const: aggre0 # Aggre NoC PCIe0 AXI clock
> +        interconnects:
> +          maxItems: 1
> +        interconnect-names:
> +          const: icc_path
> +        iommus:
> +          maxItems: 1
> +        iommu-map:
> +          maxItems: 2
> +        power-domains:
> +          maxItems: 1
> +        power-domain-names:
> +          const: gdsc
> +        resets:
> +          maxItems: 1
> +        reset-names:
> +          items:
> +            - const: pci # PCIe core reset
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - qcom,pcie-sm8550-pcie1
> +    then:
> +      properties:
> +        clocks:
> +          minItems: 12
> +          maxItems: 12
> +        clock-names:
> +          items:
> +            - const: pipe # PIPE clock
> +            - const: pipe_mux # PIPE MUX
> +            - const: phy_pipe # PIPE output clock
> +            - const: ref # REFERENCE clock

You should not need these four clocks. They are unused by the driver.
Same applies to pcie0 too.

> +            - const: aux # Auxiliary clock
> +            - const: cfg # Configuration clock
> +            - const: bus_master # Master AXI clock
> +            - const: bus_slave # Slave AXI clock
> +            - const: slave_q2a # Slave Q2A clock
> +            - const: ddrss_sf_tbu # PCIe SF TBU clock
> +            - const: aggre1 # Aggre NoC PCIe1 AXI clock
> +            - const: cnoc_pcie_sf_axi # Config NoC PCIe1 AXI clock
> +        interconnects:
> +          maxItems: 1
> +        interconnect-names:
> +          const: icc_path
> +        iommus:
> +          maxItems: 1
> +        iommu-map:
> +          maxItems: 2
> +        power-domains:
> +          maxItems: 1
> +        power-domain-names:
> +          const: gdsc
> +        resets:
> +          maxItems: 2
> +        reset-names:
> +          items:
> +            - const: pci # PCIe core reset
> +            - const: pcie_1_link_down_reset # PCIe link down reset
> +
>    - if:
>        properties:
>          compatible:
> @@ -672,6 +766,8 @@ allOf:
>                - qcom,pcie-sm8250
>                - qcom,pcie-sm8450-pcie0
>                - qcom,pcie-sm8450-pcie1
> +              - qcom,pcie-sm8550-pcie0
> +              - qcom,pcie-sm8550-pcie1
>      then:
>        oneOf:
>          - properties:
> --
> 2.34.1
>


-- 
With best wishes
Dmitry



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux