Re: [PATCH v3 1/8] dt-bindings: PCI: qcom: Add sm8350 to bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Nov 10, 2022 at 09:31:51PM +0300, Dmitry Baryshkov wrote:
> Add bindings for two PCIe hosts on SM8350 platform. The only difference
> between them is in the aggre0 clock, which warrants the oneOf clause for
> the clocks properties.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
>  .../devicetree/bindings/pci/qcom,pcie.yaml    | 46 +++++++++++++++++++
>  1 file changed, 46 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
> index 54f07852d279..502c15f7dd96 100644
> --- a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
> @@ -32,6 +32,7 @@ properties:
>        - qcom,pcie-sdm845
>        - qcom,pcie-sm8150
>        - qcom,pcie-sm8250
> +      - qcom,pcie-sm8350
>        - qcom,pcie-sm8450-pcie0
>        - qcom,pcie-sm8450-pcie1
>        - qcom,pcie-ipq6018
> @@ -185,6 +186,7 @@ allOf:
>                - qcom,pcie-sc8180x
>                - qcom,pcie-sc8280xp
>                - qcom,pcie-sm8250
> +              - qcom,pcie-sm8350
>                - qcom,pcie-sm8450-pcie0
>                - qcom,pcie-sm8450-pcie1
>      then:
> @@ -540,6 +542,49 @@ allOf:
>            items:
>              - const: pci # PCIe core reset
>  
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - qcom,pcie-sm8350
> +    then:
> +      oneOf:
> +          # Unfortunately the "optional" aggre0 clock is used in the middle of the list

As Krzysztof mentioned, you can just move it last (and the driver will
still enable aggre0 before aggre1 if that's a concern).

> +        - properties:
> +            clocks:
> +              maxItems: 9
> +            clock-names:
> +              items:
> +                - const: aux # Auxiliary clock
> +                - const: cfg # Configuration clock
> +                - const: bus_master # Master AXI clock
> +                - const: bus_slave # Slave AXI clock
> +                - const: slave_q2a # Slave Q2A clock
> +                - const: tbu # PCIe TBU clock
> +                - const: ddrss_sf_tbu # PCIe SF TBU clock
> +                - const: aggre0 # Aggre NoC PCIe0 AXI clock
> +                - const: aggre1 # Aggre NoC PCIe1 AXI clock

Have you verified that you actually need the bus clock for the second
controller here?

> +        - properties:
> +            clocks:
> +              maxItems: 8
> +            clock-names:
> +              items:
> +                - const: aux # Auxiliary clock
> +                - const: cfg # Configuration clock
> +                - const: bus_master # Master AXI clock
> +                - const: bus_slave # Slave AXI clock
> +                - const: slave_q2a # Slave Q2A clock
> +                - const: tbu # PCIe TBU clock
> +                - const: ddrss_sf_tbu # PCIe SF TBU clock
> +                - const: aggre1 # Aggre NoC PCIe1 AXI clock
> +      properties:
> +        resets:
> +          maxItems: 1
> +        reset-names:
> +          items:
> +            - const: pci # PCIe core reset
> +

Johan



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux