Re: [PATCH v7 15/20] PCI: dwc: Introduce dma-ranges property support for RC-host

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Nov 14, 2022 at 11:27:21PM +0530, Manivannan Sadhasivam wrote:
> On Mon, Nov 14, 2022 at 11:32:27AM +0300, Serge Semin wrote:
> > On Mon, Nov 14, 2022 at 12:09:15PM +0530, Manivannan Sadhasivam wrote:
> > > On Sun, Nov 13, 2022 at 10:12:56PM +0300, Serge Semin wrote:
> > > > In accordance with the generic PCIe Root Port DT-bindings the "dma-ranges"
> > > > property has the same format as the "ranges" property. The only difference
> > > > is in their semantics. The "dma-ranges" property describes the PCIe-to-CPU
> > > > memory mapping in opposite to the CPU-to-PCIe mapping of the "ranges"
> > > > property. Even though the DW PCIe controllers are normally equipped with
> > > > the internal Address Translation Unit which inbound and outbound tables
> > > > can be used to implement both properties semantics, it was surprising for
> > > > me to discover that the host-related part of the DW PCIe driver currently
> > > > supports the "ranges" property only while the "dma-ranges" windows are
> > > > just ignored. Having the "dma-ranges" supported in the driver would be
> > > > very handy for the platforms, that don't tolerate the 1:1 CPU-PCIe memory
> > > > mapping and require a customized PCIe memory layout. So let's fix that by
> > > > introducing the "dma-ranges" property support.
> > > > 
> > > > First of all we suggest to rename the dw_pcie_prog_inbound_atu() method to
> > > > dw_pcie_prog_ep_inbound_atu() and create a new version of the
> > > > dw_pcie_prog_inbound_atu() function. Thus we'll have two methods for the
> > > > RC and EP controllers respectively in the same way as it has been
> > > > developed for the outbound ATU setup methods.
> > > > 
> > > 
> > 
> > > I think you should split the function renaming part into a separate patch.
> > 
> > Don't see this necessary especially at the current stage of the
> > patchset. Without this modification the renaming isn't required. So
> > should a revert-patch is applied both of the updates will be undone.
> > 
> 
> There is no necessity for both API renaming and dma-ranges implementation to be
> in the same patch as long as first one is functionally independent. But I'll
> defer it to you.
> 
> > > 
> > > > Secondly aside with the memory window index and type the new
> > > > dw_pcie_prog_inbound_atu() function will accept CPU address, PCIe address
> > > > and size as its arguments. These parameters define the PCIe and CPU memory
> > > > ranges which will be used to setup the respective inbound ATU mapping. The
> > > > passed parameters need to be verified against the ATU ranges constraints
> > > > in the same way as it is done for the outbound ranges.
> > > > 
> > > > Finally the DMA-ranges detected for the PCIe controller need to be
> > > > converted to the inbound ATU entries during the host controller
> > > > initialization procedure. It will be done in the framework of the
> > > > dw_pcie_iatu_setup() method. Note before setting the inbound ranges up we
> > > > need to disable all the inbound ATU entries in order to prevent unexpected
> > > > PCIe TLPs translations defined by some third party software like
> > > > bootloaders.
> > > > 
> > > > Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
> > > > Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> > > > Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> > > > 
> > > > ---
> > > > 
> > > > Changelog v3:
> > > > - Drop inbound iATU window size alignment constraint. (@Manivannan)
> > > > ---
> > > >  .../pci/controller/dwc/pcie-designware-ep.c   |  4 +-
> > > >  .../pci/controller/dwc/pcie-designware-host.c | 32 ++++++++++-
> > > >  drivers/pci/controller/dwc/pcie-designware.c  | 56 ++++++++++++++++++-
> > > >  drivers/pci/controller/dwc/pcie-designware.h  |  6 +-
> > > >  4 files changed, 89 insertions(+), 9 deletions(-)
> > > > 
> > > > diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
> > > > index 83ddb190292e..237bb01d7852 100644
> > > > --- a/drivers/pci/controller/dwc/pcie-designware-ep.c
> > > > +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
> > > > @@ -171,8 +171,8 @@ static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep *ep, u8 func_no, int type,
> > > >  		return -EINVAL;
> > > >  	}
> > > >  
> > > > -	ret = dw_pcie_prog_inbound_atu(pci, func_no, free_win, type,
> > > > -				       cpu_addr, bar);
> > > > +	ret = dw_pcie_prog_ep_inbound_atu(pci, func_no, free_win, type,
> > > > +					  cpu_addr, bar);
> > > >  	if (ret < 0) {
> > > >  		dev_err(pci->dev, "Failed to program IB window\n");
> > > >  		return ret;
> > > > diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
> > > > index 39f3b37d4033..ea923c25e12d 100644
> > > > --- a/drivers/pci/controller/dwc/pcie-designware-host.c
> > > > +++ b/drivers/pci/controller/dwc/pcie-designware-host.c
> > > > @@ -643,12 +643,15 @@ static int dw_pcie_iatu_setup(struct dw_pcie_rp *pp)
> > > >  	}
> > > >  
> > > >  	/*
> > > > -	 * Ensure all outbound windows are disabled before proceeding with
> > > > -	 * the MEM/IO ranges setups.
> > > > +	 * Ensure all out/inbound windows are disabled before proceeding with
> > > > +	 * the MEM/IO (dma-)ranges setups.
> > > >  	 */
> > > >  	for (i = 0; i < pci->num_ob_windows; i++)
> > > >  		dw_pcie_disable_atu(pci, PCIE_ATU_REGION_DIR_OB, i);
> > > >  
> > > > +	for (i = 0; i < pci->num_ib_windows; i++)
> > > > +		dw_pcie_disable_atu(pci, PCIE_ATU_REGION_DIR_IB, i);
> > > > +
> > > >  	i = 0;
> > > >  	resource_list_for_each_entry(entry, &pp->bridge->windows) {
> > > >  		if (resource_type(entry->res) != IORESOURCE_MEM)
> > > > @@ -685,9 +688,32 @@ static int dw_pcie_iatu_setup(struct dw_pcie_rp *pp)
> > > >  	}
> > > >  
> > > >  	if (pci->num_ob_windows <= i)
> > > > -		dev_warn(pci->dev, "Resources exceed number of ATU entries (%d)\n",
> > > > +		dev_warn(pci->dev, "Ranges exceed outbound iATU size (%d)\n",
> > > >  			 pci->num_ob_windows);
> > > >  
> > > > +	i = 0;
> > > > +	resource_list_for_each_entry(entry, &pp->bridge->dma_ranges) {
> > > > +		if (resource_type(entry->res) != IORESOURCE_MEM)
> > > > +			continue;
> > > > +
> > > > +		if (pci->num_ib_windows <= i)
> > > > +			break;
> > > > +
> > > > +		ret = dw_pcie_prog_inbound_atu(pci, i++, PCIE_ATU_TYPE_MEM,
> > > > +					       entry->res->start,
> > > > +					       entry->res->start - entry->offset,
> > > > +					       resource_size(entry->res));
> > > > +		if (ret) {
> > > > +			dev_err(pci->dev, "Failed to set DMA range %pr\n",
> > > > +				entry->res);
> > > > +			return ret;
> > > > +		}
> > > > +	}
> > > > +
> > > > +	if (pci->num_ib_windows <= i)
> > > > +		dev_warn(pci->dev, "Dma-ranges exceed inbound iATU size (%u)\n",
> > > 
> > 
> > > s/Dma/dma
> > 
> > Well, I could also make it like DMA-ranges. It depends on what you
> > imply by the message. I've made it looking like the Ranges-related
> > counterpart.
> > 
> 

> Either "DMA" or "dma" looks good. I haven't seen "Dma" mostly.

"DMA" it's then. So it would look more like the just "ranges"-related
warning.

-Sergey

> 
> Thanks,
> Mani
> 
> > -Sergey
> > 
> > > 
> > > Thanks,
> > > Mani
> > > 
> > > > +			 pci->num_ib_windows);
> > > > +
> > > >  	return 0;
> > > >  }
> > > >  
> > > > diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> > > > index c6725c519a47..ca830ee794a7 100644
> > > > --- a/drivers/pci/controller/dwc/pcie-designware.c
> > > > +++ b/drivers/pci/controller/dwc/pcie-designware.c
> > > > @@ -393,8 +393,60 @@ static inline void dw_pcie_writel_atu_ib(struct dw_pcie *pci, u32 index, u32 reg
> > > >  	dw_pcie_writel_atu(pci, PCIE_ATU_REGION_DIR_IB, index, reg, val);
> > > >  }
> > > >  
> > > > -int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, u8 func_no, int index,
> > > > -			     int type, u64 cpu_addr, u8 bar)
> > > > +int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int type,
> > > > +			     u64 cpu_addr, u64 pci_addr, u64 size)
> > > > +{
> > > > +	u64 limit_addr = pci_addr + size - 1;
> > > > +	u32 retries, val;
> > > > +
> > > > +	if ((limit_addr & ~pci->region_limit) != (pci_addr & ~pci->region_limit) ||
> > > > +	    !IS_ALIGNED(cpu_addr, pci->region_align) ||
> > > > +	    !IS_ALIGNED(pci_addr, pci->region_align) || !size) {
> > > > +		return -EINVAL;
> > > > +	}
> > > > +
> > > > +	dw_pcie_writel_atu_ib(pci, index, PCIE_ATU_LOWER_BASE,
> > > > +			      lower_32_bits(pci_addr));
> > > > +	dw_pcie_writel_atu_ib(pci, index, PCIE_ATU_UPPER_BASE,
> > > > +			      upper_32_bits(pci_addr));
> > > > +
> > > > +	dw_pcie_writel_atu_ib(pci, index, PCIE_ATU_LIMIT,
> > > > +			      lower_32_bits(limit_addr));
> > > > +	if (dw_pcie_ver_is_ge(pci, 460A))
> > > > +		dw_pcie_writel_atu_ib(pci, index, PCIE_ATU_UPPER_LIMIT,
> > > > +				      upper_32_bits(limit_addr));
> > > > +
> > > > +	dw_pcie_writel_atu_ib(pci, index, PCIE_ATU_LOWER_TARGET,
> > > > +			      lower_32_bits(cpu_addr));
> > > > +	dw_pcie_writel_atu_ib(pci, index, PCIE_ATU_UPPER_TARGET,
> > > > +			      upper_32_bits(cpu_addr));
> > > > +
> > > > +	val = type;
> > > > +	if (upper_32_bits(limit_addr) > upper_32_bits(pci_addr) &&
> > > > +	    dw_pcie_ver_is_ge(pci, 460A))
> > > > +		val |= PCIE_ATU_INCREASE_REGION_SIZE;
> > > > +	dw_pcie_writel_atu_ib(pci, index, PCIE_ATU_REGION_CTRL1, val);
> > > > +	dw_pcie_writel_atu_ib(pci, index, PCIE_ATU_REGION_CTRL2, PCIE_ATU_ENABLE);
> > > > +
> > > > +	/*
> > > > +	 * Make sure ATU enable takes effect before any subsequent config
> > > > +	 * and I/O accesses.
> > > > +	 */
> > > > +	for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
> > > > +		val = dw_pcie_readl_atu_ib(pci, index, PCIE_ATU_REGION_CTRL2);
> > > > +		if (val & PCIE_ATU_ENABLE)
> > > > +			return 0;
> > > > +
> > > > +		mdelay(LINK_WAIT_IATU);
> > > > +	}
> > > > +
> > > > +	dev_err(pci->dev, "Inbound iATU is not being enabled\n");
> > > > +
> > > > +	return -ETIMEDOUT;
> > > > +}
> > > > +
> > > > +int dw_pcie_prog_ep_inbound_atu(struct dw_pcie *pci, u8 func_no, int index,
> > > > +				int type, u64 cpu_addr, u8 bar)
> > > >  {
> > > >  	u32 retries, val;
> > > >  
> > > > diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> > > > index a871ae7eb59e..37801bbce854 100644
> > > > --- a/drivers/pci/controller/dwc/pcie-designware.h
> > > > +++ b/drivers/pci/controller/dwc/pcie-designware.h
> > > > @@ -346,8 +346,10 @@ int dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type,
> > > >  			      u64 cpu_addr, u64 pci_addr, u64 size);
> > > >  int dw_pcie_prog_ep_outbound_atu(struct dw_pcie *pci, u8 func_no, int index,
> > > >  				 int type, u64 cpu_addr, u64 pci_addr, u64 size);
> > > > -int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, u8 func_no, int index,
> > > > -			     int type, u64 cpu_addr, u8 bar);
> > > > +int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int type,
> > > > +			     u64 cpu_addr, u64 pci_addr, u64 size);
> > > > +int dw_pcie_prog_ep_inbound_atu(struct dw_pcie *pci, u8 func_no, int index,
> > > > +				int type, u64 cpu_addr, u8 bar);
> > > >  void dw_pcie_disable_atu(struct dw_pcie *pci, u32 dir, int index);
> > > >  void dw_pcie_setup(struct dw_pcie *pci);
> > > >  void dw_pcie_iatu_detect(struct dw_pcie *pci);
> > > > -- 
> > > > 2.38.1
> > > > 
> > > > 
> > > 
> > > -- 
> > > மணிவண்ணன் சதாசிவம்
> 
> -- 
> மணிவண்ணன் சதாசிவம்



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux