[PATCH v4 2/3] arm64: dts: mt8195: Add pcie and pcie phy nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add pcie and pcie phy nodes for mt8195.

Signed-off-by: Jianjun Wang <jianjun.wang@xxxxxxxxxxxx>
Signed-off-by: Tinghan Shen <tinghan.shen@xxxxxxxxxxxx>
---
 arch/arm64/boot/dts/mediatek/mt8195.dtsi | 150 +++++++++++++++++++++++
 1 file changed, 150 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 905d1a90b406..97de03267884 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -13,6 +13,7 @@
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/pinctrl/mt8195-pinfunc.h>
 #include <dt-bindings/power/mt8195-power.h>
+#include <dt-bindings/reset/mt8195-resets.h>
 
 / {
 	compatible = "mediatek,mt8195";
@@ -1182,6 +1183,110 @@
 			status = "disabled";
 		};
 
+		pcie0: pcie@112f0000 {
+			compatible = "mediatek,mt8195-pcie",
+				     "mediatek,mt8192-pcie";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			reg = <0 0x112f0000 0 0x4000>;
+			reg-names = "pcie-mac";
+			interrupts = <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH 0>;
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0 0x20000000
+				  0x0 0x20000000 0 0x200000>,
+				 <0x82000000 0 0x20200000
+				  0x0 0x20200000 0 0x3e00000>;
+
+			iommu-map = <0 &iommu_infra IOMMU_PORT_INFRA_PCIE0 0x2>;
+			iommu-map-mask = <0x0>;
+
+			clocks = <&infracfg_ao CLK_INFRA_AO_PCIE_PL_P_250M_P0>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_TL_26M>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_TL_96M>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_TL_32K>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_PERI_26M>,
+				 <&pericfg_ao CLK_PERI_AO_PCIE_P0_MEM>;
+			clock-names = "pl_250m", "tl_26m", "tl_96m",
+				      "tl_32k", "peri_26m", "peri_mem";
+			assigned-clocks = <&topckgen CLK_TOP_TL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4_D4>;
+
+			phys = <&pciephy>;
+			phy-names = "pcie-phy";
+
+			power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_MAC_P0>;
+
+			resets = <&infracfg_ao MT8195_INFRA_RST2_PCIE_P0_SWRST>;
+			reset-names = "mac";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+					<0 0 0 2 &pcie_intc0 1>,
+					<0 0 0 3 &pcie_intc0 2>,
+					<0 0 0 4 &pcie_intc0 3>;
+			status = "disabled";
+
+			pcie_intc0: interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		pcie1: pcie@112f8000 {
+			compatible = "mediatek,mt8195-pcie",
+				     "mediatek,mt8192-pcie";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			reg = <0 0x112f8000 0 0x4000>;
+			reg-names = "pcie-mac";
+			interrupts = <GIC_SPI 792 IRQ_TYPE_LEVEL_HIGH 0>;
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0 0x24000000
+				  0x0 0x24000000 0 0x200000>,
+				 <0x82000000 0 0x24200000
+				  0x0 0x24200000 0 0x3e00000>;
+
+			iommu-map = <0 &iommu_infra IOMMU_PORT_INFRA_PCIE1 0x2>;
+			iommu-map-mask = <0x0>;
+
+			clocks = <&infracfg_ao CLK_INFRA_AO_PCIE_PL_P_250M_P1>,
+				 <&clk26m>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_TL_96M>,
+				 <&clk26m>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_PERI_26M>,
+				 /* Designer has connect pcie1 with peri_mem_p0 clock */
+				 <&pericfg_ao CLK_PERI_AO_PCIE_P0_MEM>;
+			clock-names = "pl_250m", "tl_26m", "tl_96m",
+				      "tl_32k", "peri_26m", "peri_mem";
+			assigned-clocks = <&topckgen CLK_TOP_TL_P1>;
+			assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4_D4>;
+
+			phys = <&u3port1 PHY_TYPE_PCIE>;
+			phy-names = "pcie-phy";
+			power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_MAC_P1>;
+
+			resets = <&infracfg_ao MT8195_INFRA_RST2_PCIE_P1_SWRST>;
+			reset-names = "mac";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+					<0 0 0 2 &pcie_intc1 1>,
+					<0 0 0 3 &pcie_intc1 2>,
+					<0 0 0 4 &pcie_intc1 3>;
+			status = "disabled";
+
+			pcie_intc1: interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
 		nor_flash: spi@1132c000 {
 			compatible = "mediatek,mt8195-nor",
 				     "mediatek,mt8173-nor";
@@ -1241,6 +1346,34 @@
 				reg = <0x189 0x2>;
 				bits = <7 5>;
 			};
+			pciephy_rx_ln1: pciephy-rx-ln1@190,1 {
+				reg = <0x190 0x1>;
+				bits = <0 4>;
+			};
+			pciephy_tx_ln1_nmos: pciephy-tx-ln1-nmos@190,2 {
+				reg = <0x190 0x1>;
+				bits = <4 4>;
+			};
+			pciephy_tx_ln1_pmos: pciephy-tx-ln1-pmos@191,1 {
+				reg = <0x191 0x1>;
+				bits = <0 4>;
+			};
+			pciephy_rx_ln0: pciephy-rx-ln0@191,2 {
+				reg = <0x191 0x1>;
+				bits = <4 4>;
+			};
+			pciephy_tx_ln0_nmos: pciephy-tx-ln0-nmos@192,1 {
+				reg = <0x192 0x1>;
+				bits = <0 4>;
+			};
+			pciephy_tx_ln0_pmos: pciephy-tx-ln0-pmos@192,2 {
+				reg = <0x192 0x1>;
+				bits = <4 4>;
+			};
+			pciephy_glb_intr: pciephy-glb-intr@193 {
+				reg = <0x193 0x1>;
+				bits = <0 4>;
+			};
 		};
 
 		u3phy2: t-phy@11c40000 {
@@ -1461,6 +1594,23 @@
 			};
 		};
 
+		pciephy: phy@11e80000 {
+			compatible = "mediatek,mt8195-pcie-phy";
+			reg = <0 0x11e80000 0 0x10000>;
+			reg-names = "sif";
+			nvmem-cells = <&pciephy_glb_intr>, <&pciephy_tx_ln0_pmos>,
+				      <&pciephy_tx_ln0_nmos>, <&pciephy_rx_ln0>,
+				      <&pciephy_tx_ln1_pmos>, <&pciephy_tx_ln1_nmos>,
+				      <&pciephy_rx_ln1>;
+			nvmem-cell-names = "glb_intr", "tx_ln0_pmos",
+					   "tx_ln0_nmos", "rx_ln0",
+					   "tx_ln1_pmos", "tx_ln1_nmos",
+					   "rx_ln1";
+			power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_PHY>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
 		ufsphy: ufs-phy@11fa0000 {
 			compatible = "mediatek,mt8195-ufsphy", "mediatek,mt8183-ufsphy";
 			reg = <0 0x11fa0000 0 0xc000>;
-- 
2.18.0




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux