[PATCH V2 1/2] irqchip/loongson-pch-pic: Support to set irq type for ACPI path

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



For ACPI path, the translate callback used IRQ_TYPE_NONE and ignored
the irq type in fwspec->param[1]. For supporting to set type for
irqs of the irqdomain, fwspec->param[1] should be used to get irq
type.

On Loongson platform, the irq trigger type of PCI devices is
high level, so high level triggered type is inputed to acpi_register_gsi
when create irq mapping for PCI devices.

Signed-off-by: Jianmin Lv <lvjianmin@xxxxxxxxxxx>
---
 drivers/acpi/pci_irq.c                 | 6 ++++--
 drivers/irqchip/irq-loongson-pch-pic.c | 9 ++++++++-
 2 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index 08e15774fb9f..ff30ceca2203 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -387,13 +387,15 @@ int acpi_pci_irq_enable(struct pci_dev *dev)
 	u8 pin;
 	int triggering = ACPI_LEVEL_SENSITIVE;
 	/*
-	 * On ARM systems with the GIC interrupt model, level interrupts
+	 * On ARM systems with the GIC interrupt model, or LoongArch
+	 * systems with the LPIC interrupt model, level interrupts
 	 * are always polarity high by specification; PCI legacy
 	 * IRQs lines are inverted before reaching the interrupt
 	 * controller and must therefore be considered active high
 	 * as default.
 	 */
-	int polarity = acpi_irq_model == ACPI_IRQ_MODEL_GIC ?
+	int polarity = acpi_irq_model == ACPI_IRQ_MODEL_GIC ||
+		       acpi_irq_model == ACPI_IRQ_MODEL_LPIC ?
 				      ACPI_ACTIVE_HIGH : ACPI_ACTIVE_LOW;
 	char *link = NULL;
 	char link_desc[16];
diff --git a/drivers/irqchip/irq-loongson-pch-pic.c b/drivers/irqchip/irq-loongson-pch-pic.c
index c01b9c257005..5576c97fec85 100644
--- a/drivers/irqchip/irq-loongson-pch-pic.c
+++ b/drivers/irqchip/irq-loongson-pch-pic.c
@@ -159,11 +159,18 @@ static int pch_pic_domain_translate(struct irq_domain *d,
 		return -EINVAL;
 
 	if (of_node) {
+		if (fwspec->param_count < 2)
+			return -EINVAL;
+
 		*hwirq = fwspec->param[0] + priv->ht_vec_base;
 		*type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK;
 	} else {
 		*hwirq = fwspec->param[0] - priv->gsi_base;
-		*type = IRQ_TYPE_NONE;
+
+		if (fwspec->param_count > 1)
+			*type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK;
+		else
+			*type = IRQ_TYPE_NONE;
 	}
 
 	return 0;
-- 
2.31.1




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux