Hi, On 10/5/22 15:33, Krzysztof Wilczyński wrote: > (+CC Bjorn and Hans directly for visibility) > > Hi Florent, > > I am sorry that you are having issues! > >> As per >> https://www.kernel.org/doc/Documentation/admin-guide/kernel-parameters.txt, >> I am sending you this email to inform you that I need to set "pci=no_e820" >> parameter to get the SSD and touchpad working. >> >> --------------------------------------------------------------------- >> >> Dmidecode: >> >> BIOS Information >> Vendor: INSYDE Corp. >> Version: 1.07.02TPCS >> Release Date: 08/19/2020 >> >> BIOS Revision: 7.2 >> Firmware Revision: 7.2 >> Handle 0x0001, DMI type 1, 27 bytes >> System Information >> Manufacturer: PC Specialist LTD >> Product Name: NL4x_NL5xLU >> Base Board Information >> Manufacturer: CLEVO >> Product Name: NL4XLU >> >> uname -a >> Linux topik 5.19.0-2-amd64 #1 SMP PREEMPT_DYNAMIC Debian 5.19.11-1 >> (2022-09-24) x86_64 GNU/Linux > > We need a little bit more information, if you have the time, to collect > that will be of great help to us with troubleshooting this. > > Would you be able to collect output from the following: > > - lspci -vvv > - dmesg (preferably since the system started) > > Then, either attach these here as text attachments, or better yet, open > a bug report against the PCI driver on Kernel's Bugzilla at > > https://bugzilla.kernel.org/ > > and include as much information as possible about your system as you can, > plus the details mentioned above. That would help greatly. Yes if you can file a bug in: https://bugzilla.kernel.org/ with the requested logs attached so that we have those for future reference, that would be great. Note we already have one no_e820 DMI quirk for Clevo models, so these models may just need another quirk, but first we would like to better understand the problem. For the existing quirk see: arch/x86/pci/acpi.c around line 180: /* * Clevo X170KM-G barebones have the same E820 reservation covering * the entire _CRS 32-bit window issue as the Lenovo *IIL* models. * See https://bugzilla.kernel.org/show_bug.cgi?id=214259 */ { .callback = set_no_e820, .ident = "Clevo X170KM-G Barebone", .matches = { DMI_MATCH(DMI_BOARD_NAME, "X170KM-G"), }, }, I'm a bit surprised this is needed for the SSD too though. Usually it is just the touchpad + hotplugged (Thunderbolt) PCI devices which need this. BTW please also attach the dmidecode.txt file generated by: sudo dmidecode > dmidecode.txt to the bug, since we need those strings to add the quirk. Note this will also include serial-numbers for your device (if your model uses unique per model serial numbers) feel free to edit the file and remove those. Regards, Hans