Hi Bjorn / Lorenzo,
Just checking if there are any more comments for this patch? If not, are
we good to take it?
Thanks,
Vidya Sagar
On 9/26/2022 3:59 PM, Vidya Sagar wrote:
Hi,
Just checking if we are good with this patch or does it need any further
modifications?
Thanks,
Vidya Sagar
On 9/15/2022 8:22 PM, Manivannan Sadhasivam wrote:
External email: Use caution opening links or attachments
On Thu, Sep 15, 2022 at 09:16:27AM -0500, Rob Herring wrote:
On Wed, Sep 14, 2022 at 1:24 AM Manivannan Sadhasivam
<manivannan.sadhasivam@xxxxxxxxxx> wrote:
On Tue, Sep 13, 2022 at 03:07:46PM -0500, Bjorn Helgaas wrote:
On Tue, Sep 13, 2022 at 06:00:30PM +0100, Jon Hunter wrote:
On 13/09/2022 17:51, Manivannan Sadhasivam wrote:
On Tue, Sep 13, 2022 at 03:42:37PM +0530, Vidya Sagar wrote:
Some of the platforms (like Tegra194 and Tegra234) have open
slots and
not having an endpoint connected to the slot is not an error.
So, changing the macro from dev_err to dev_info to log the event.
But the link up not happening is an actual error and -ETIMEDOUT
is being
returned. So I don't think the log severity should be changed.
Yes it is an error in the sense it is a timeout, but reporting an
error
because nothing is attached to a PCI slot seems a bit noisy.
Please note
that a similar change was made by the following commit and it also
seems
appropriate here ...
commit 4b16a8227907118e011fb396022da671a52b2272
Author: Manikanta Maddireddy <mmaddireddy@xxxxxxxxxx>
Date: Tue Jun 18 23:32:06 2019 +0530
PCI: tegra: Change link retry log level to debug
BTW, we check for error messages in the dmesg output and this is a
new error
seen as of Linux v6.0 and so this was flagged in a test. We can
ignore the
error, but in this case it seem more appropriate to make this a
info or
debug level print.
Can you tell whether there's a device present, e.g., via Slot Status
Presence Detect? If there's nothing in the slot, I don't know why we
would print anything at all. If a card is present but there's no
link, that's probably worthy of dev_info() or even dev_err().
I don't think all form factors allow for the PRSNT pin to be wired up,
so we cannot know if the device is actually present in the slot or
not all
the time. Maybe we should do if the form factor supports it?
I guess if you can tell the slot is empty, there's no point in even
trying to start the link, so you could avoid both the message and the
timeout by not even calling dw_pcie_wait_for_link().
Right. There is an overhead of waiting for ~1ms during boot.
Async probe should mitigate that, right? Saravana is working toward
making that the default instead of opt in, but you could opt in now.
No. The delay is due to the DWC core waiting for link up that depends on
the PCIe device to be present on the slot. The driver probe order
doesn't apply here.
Thanks,
Mani
Rob
