Based on the 6.0-rc1 of the pci/next branch.
This series adds the i.MX8MP PCIe support and tested on i.MX8MP
EVK board when one PCIe NVME device is used.
- i.MX8MP PCIe has reversed initial PERST bit value refer to i.MX8MQ/i.MX8MM.
Add the PHY PERST explicitly for i.MX8MP PCIe PHY.
- Add the i.MX8MP PCIe PHY support in the i.MX8M PCIe PHY driver.
And share as much as possible codes with i.MX8MM PCIe PHY.
- Add the i.MX8MP PCIe support in binding document, DTS files, and PCIe
driver.
Main changes v10-->v11:
Refer to Ahmad's comments do the following changes;
- Correct the spell mistake and refine the commit log.
- Make contents of struct imx8_pcie_phy_drvdata indent by the member name.
- Use the dev_err_probe replace the dev_err.
Main changes v9-->v10:
- Refer to Vinod's review comments, drop the array, and use the static data
structure directly in the drvdata definition.
Main changes v8-->v9:
- Split the PHY driver changes into three patches.
- To keep the format consistent, re-define the PHY_CMN_REG75, and remove
two useless BIT definitions.
- Refine the i.MX8MM PCIe PHY driver, let it more reviewable, flexible,
and easy to expand.
- Add the i.MX8MP PCIe PHY support.
- Only PHY related patches from v8, Since the others patches had been merged
by Phillipp/Shawn/Lorenzo.
Main changes v7-->v8:
- Add the Reviewed-by tag, no other changes.
Only two patches in v8, Since the others patches had been merged by
Phillipp/Shawn/Lorenzo.
Main changes v6-->v7:
- Add "Reviewed-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>" into first three
patches.
- Use "const *char" to replace the static allocation.
Main changes v5-->v6:
- To avoid code duplication when find the gpr syscon regmap, add the
gpr compatible into the drvdata.
- Add one missing space before one curly brace in 3/7 of v5 series.
- 4/7 of v5 had been applied by Phillipp, thanks. For ease of tests, still
keep it in v6.
Main changes v4-->v5:
- Use Lucas' approach, let blk-ctrl driver do the hsio-mix resets.
- Fetch the iomuxc-gpr regmap by the different phandles.
Main changes v3-->v4:
- Regarding Phillipp's suggestions, add fix tag into the first commit.
- Add Reviewed and Tested tags.
Main changes v2-->v3:
- Fix the schema checking error in the PHY dt-binding patch.
- Inspired by Lucas, the PLL configurations might not required when
external OSC is used as PCIe referrence clock. It's true. Remove all
the HSIO PLL bit manipulations, and PCIe works fine on i.MX8MP EVK board
with one NVME device is used.
- Drop the #4 patch of v2, since it had been applied by Rob.
Main changes v1-->v2:
- It's my fault forget including Vinod, re-send v2 after include Vinod
and linux-phy@xxxxxxxxxxxxxxxxxxx.
- List the basements of this patch-set. The branch, codes changes and so on.
- Clean up some useless register and bit definitions in #3 patch.
Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml | 16 ++++++++--
drivers/phy/freescale/phy-fsl-imx8m-pcie.c | 139 ++++++++++++++++++++++++++++++++++++++++++++++++++++++----------------------------
2 files changed, 105 insertions(+), 50 deletions(-)
[PATCH v11 1/4] dt-binding: phy: Add i.MX8MP PCIe PHY binding
[PATCH v11 2/4] phy: freescale: imx8m-pcie: Refine register
[PATCH v11 3/4] phy: freescale: imx8m-pcie: Refine i.MX8MM PCIe PHY
[PATCH v11 4/4] phy: freescale: imx8m-pcie: Add i.MX8MP PCIe PHY
