From: Pali Rohár <pali@xxxxxxxxxx> The No Command Completed Support bit in the Slot Capabilities register indicates whether Command Completed Interrupt Enable is unsupported. We already check whether No Command Completed Support bit is set in pcie_wait_cmd(), and do not wait in this case. Let's not enable this Command Completed Interrupt at all if NCCS is set, so that when users dump configuration space from userspace, the dump does not confuse them by saying that Command Completed Interrupt is not supported, but it is enabled. Signed-off-by: Pali Rohár <pali@xxxxxxxxxx> Signed-off-by: Marek Behún <kabel@xxxxxxxxxx> Reviewed-by: Lukas Wunner <lukas@xxxxxxxxx> --- drivers/pci/hotplug/pciehp_hpc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 040ae076ec0e..10e9670eea0b 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -811,7 +811,9 @@ static void pcie_enable_notification(struct controller *ctrl) else cmd |= PCI_EXP_SLTCTL_PDCE; if (!pciehp_poll_mode) - cmd |= PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_CCIE; + cmd |= PCI_EXP_SLTCTL_HPIE; + if (!pciehp_poll_mode && !NO_CMD_CMPL(ctrl)) + cmd |= PCI_EXP_SLTCTL_CCIE; mask = (PCI_EXP_SLTCTL_PDCE | PCI_EXP_SLTCTL_ABPE | PCI_EXP_SLTCTL_PFDE | -- 2.35.1
