The bits PCI_ERR_CAP_ECRC_GENC and PCI_ERR_CAP_ECRC_CHKC are read only, reporting the capability of ECRC. Don't write them explicitly, instead read the register (where they are set), and add the bits that enable these features. Signed-off-by: Marek Behún <kabel@xxxxxxxxxx> --- drivers/pci/controller/pci-aardvark.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c index 4855ac733484..e816ab726f66 100644 --- a/drivers/pci/controller/pci-aardvark.c +++ b/drivers/pci/controller/pci-aardvark.c @@ -584,9 +584,9 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie) reg &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); advk_writel(pcie, reg, PCIE_CORE_CMD_STATUS_REG); - /* Set Advanced Error Capabilities and Control PF0 register */ - reg = PCI_ERR_CAP_ECRC_GENC | PCI_ERR_CAP_ECRC_GENE | - PCI_ERR_CAP_ECRC_CHKC | PCI_ERR_CAP_ECRC_CHKE; + /* Enable generation and checking of ECRC on Root Bridge */ + reg = advk_readl(pcie, PCIE_CORE_PCIERR_CAP + PCI_ERR_CAP); + reg |= PCI_ERR_CAP_ECRC_GENE | PCI_ERR_CAP_ECRC_CHKE; advk_writel(pcie, reg, PCIE_CORE_PCIERR_CAP + PCI_ERR_CAP); /* Set PCIe Device Control register */ -- 2.35.1
