Not to use MSI/MSI-X for pciehp, add a kernel parameter, pcie_hp=nomsi.
In my environment, while shutting down, following stack trace is shown
sometimes.
irq 16: nobody cared (try booting with the "irqpoll" option)
Pid: 1081, comm: reboot Not tainted 3.2.0 #1
Call Trace:
<IRQ> [<ffffffff810cec1d>] __report_bad_irq+0x3d/0xe0
[<ffffffff810cee1c>] note_interrupt+0x15c/0x210
[<ffffffff810cc485>] handle_irq_event_percpu+0xb5/0x210
[<ffffffff810cc621>] handle_irq_event+0x41/0x70
[<ffffffff810cf675>] handle_fasteoi_irq+0x55/0xc0
[<ffffffff81015356>] handle_irq+0x46/0xb0
[<ffffffff814fbe9d>] do_IRQ+0x5d/0xe0
[<ffffffff814f146e>] common_interrupt+0x6e/0x6e
[<ffffffff8106b040>] ? __do_softirq+0x60/0x210
[<ffffffff8108aeb1>] ? hrtimer_interrupt+0x151/0x240
[<ffffffff814fb5ec>] call_softirq+0x1c/0x30
[<ffffffff810152d5>] do_softirq+0x65/0xa0
[<ffffffff8106ae9d>] irq_exit+0xbd/0xe0
[<ffffffff814fbf8e>] smp_apic_timer_interrupt+0x6e/0x99
[<ffffffff814f9e5e>] apic_timer_interrupt+0x6e/0x80
<EOI> [<ffffffff814f0fb1>] ? _raw_spin_unlock_irqrestore+0x11/0x20
[<ffffffff812629fc>] pci_bus_write_config_word+0x6c/0x80
[<ffffffff81266fc2>] pci_intx+0x52/0xa0
[<ffffffff8127de3d>] pci_intx_for_msi+0x1d/0x30
[<ffffffff8127e4fb>] pci_msi_shutdown+0x7b/0x110
[<ffffffff81269d34>] pci_device_shutdown+0x34/0x50
[<ffffffff81326c4f>] device_shutdown+0x2f/0x140
[<ffffffff8107b981>] kernel_restart_prepare+0x31/0x40
[<ffffffff8107b9e6>] kernel_restart+0x16/0x60
[<ffffffff8107bbfd>] sys_reboot+0x1ad/0x220
[<ffffffff814f4b90>] ? do_page_fault+0x1e0/0x460
[<ffffffff811942d0>] ? __sync_filesystem+0x90/0x90
[<ffffffff8105c9aa>] ? __cond_resched+0x2a/0x40
[<ffffffff814ef090>] ? _cond_resched+0x30/0x40
[<ffffffff81169e17>] ? iterate_supers+0xb7/0xd0
[<ffffffff814f9382>] system_call_fastpath+0x16/0x1b
handlers:
[<ffffffff8138a0f0>] usb_hcd_irq
[<ffffffff8138a0f0>] usb_hcd_irq
[<ffffffff8138a0f0>] usb_hcd_irq
Disabling IRQ #16
An un-wanted interrupt is generated when PCI driver switches from
MSI/MSI-X to INTx while shutting down the device. The interrupt does
not happen if MSI/MSI-X is not used on the device.
I confirmed that this problem does not happen if pcie_hp=nomsi was
specified and hotplug operation worked fine as usual.
(From v2, the pcie_hp=nomsi does not need any more against the device
111d:807f, since MSI/MSI-X is disabled automatically)
v2: Automatically disable MSI/MSI-X against following device:
PCI bridge: Integrated Device Technology, Inc. Device 807f (rev 02)
v3: Based on the review comment, combile the if statements.
Signed-off-by: MUNEDA Takahiro <muneda.takahiro@xxxxxxxxxxxxxx>
---
Documentation/kernel-parameters.txt | 4 ++++
drivers/pci/hotplug/pciehp_core.c | 12 ++++++++++++
drivers/pci/pcie/portdrv.h | 12 ++++++++++++
drivers/pci/pcie/portdrv_core.c | 7 +++++--
4 files changed, 33 insertions(+), 2 deletions(-)
Index: linux-3.2/drivers/pci/hotplug/pciehp_core.c
===================================================================
--- linux-3.2.orig/drivers/pci/hotplug/pciehp_core.c
+++ linux-3.2/drivers/pci/hotplug/pciehp_core.c
@@ -42,6 +42,7 @@ int pciehp_debug;
int pciehp_poll_mode;
int pciehp_poll_time;
int pciehp_force;
+int pciehp_msi_disabled;
struct workqueue_struct *pciehp_wq;
struct workqueue_struct *pciehp_ordered_wq;
@@ -57,10 +58,12 @@ module_param(pciehp_debug, bool, 0644);
module_param(pciehp_poll_mode, bool, 0644);
module_param(pciehp_poll_time, int, 0644);
module_param(pciehp_force, bool, 0644);
+module_param(pciehp_msi_disabled, bool, 0644);
MODULE_PARM_DESC(pciehp_debug, "Debugging mode enabled or not");
MODULE_PARM_DESC(pciehp_poll_mode, "Using polling mechanism for hot-plug events or not");
MODULE_PARM_DESC(pciehp_poll_time, "Polling mechanism frequency, in seconds");
MODULE_PARM_DESC(pciehp_force, "Force pciehp, even if OSHP is missing");
+MODULE_PARM_DESC(pciehp_msi, "MSI/MSI-X enabled or not");
#define PCIE_MODULE_NAME "pciehp"
@@ -72,6 +75,15 @@ static int get_attention_status (struct
static int get_latch_status (struct hotplug_slot *slot, u8 *value);
static int get_adapter_status (struct hotplug_slot *slot, u8 *value);
+static int __init pciehp_setup(char *str)
+{
+ if (!strncmp(str, "nomsi", 5))
+ pciehp_msi_disabled = true;
+
+ return 1;
+}
+__setup("pcie_hp=", pciehp_setup);
+
/**
* release_slot - free up the memory used by a slot
* @hotplug_slot: slot to free
Index: linux-3.2/drivers/pci/pcie/portdrv.h
===================================================================
--- linux-3.2.orig/drivers/pci/pcie/portdrv.h
+++ linux-3.2/drivers/pci/pcie/portdrv.h
@@ -34,6 +34,18 @@ struct pci_dev;
extern void pcie_clear_root_pme_status(struct pci_dev *dev);
+#ifdef CONFIG_HOTPLUG_PCI_PCIE
+extern int pciehp_msi_disabled;
+
+static inline bool pciehp_no_msi(void)
+{
+ return pciehp_msi_disabled;
+}
+
+#else /* !CONFIG_HOTPLUG_PCI_PCIE */
+static inline bool pciehp_no_msi(void) { return false; }
+#endif /* !CONFIG_HOTPLUG_PCI_PCIE */
+
#ifdef CONFIG_PCIE_PME
extern bool pcie_pme_msi_disabled;
Index: linux-3.2/drivers/pci/pcie/portdrv_core.c
===================================================================
--- linux-3.2.orig/drivers/pci/pcie/portdrv_core.c
+++ linux-3.2/drivers/pci/pcie/portdrv_core.c
@@ -189,8 +189,11 @@ static int init_service_irqs(struct pci_
{
int i, irq = -1;
- /* We have to use INTx if MSI cannot be used for PCIe PME. */
- if ((mask & PCIE_PORT_SERVICE_PME) && pcie_pme_no_msi()) {
+ /* We have to use INTx if MSI cannot be used for PCIe PME or pciehp. */
+ if (((mask & PCIE_PORT_SERVICE_PME) && pcie_pme_no_msi()) ||
+ ((mask & PCIE_PORT_SERVICE_HP) && pciehp_no_msi()) ||
+ ((mask & PCIE_PORT_SERVICE_HP) &&
+ (dev->vendor == PCI_VENDOR_ID_IDT && dev->device == 0x807f))) {
if (dev->pin)
irq = dev->irq;
goto no_msi;
Index: linux-3.2/Documentation/kernel-parameters.txt
===================================================================
--- linux-3.2.orig/Documentation/kernel-parameters.txt
+++ linux-3.2/Documentation/kernel-parameters.txt
@@ -2076,6 +2076,10 @@ bytes respectively. Such letter suffixes
force Enable ASPM even on devices that claim not to support it.
WARNING: Forcing ASPM on may cause system lockups.
+ pcie_hp= [PCIE] PCI Express Hotplug driver options:
+ nomsi Do not use MSI for PCI Express Native Hotplug (this
+ makes all PCIe ports use INTx for hotplug services).
+
pcie_ports= [PCIE] PCIe ports handling:
auto Ask the BIOS whether or not to use native PCIe services
associated with PCIe ports (PME, hot-plug, AER). Use
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
