From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
PTM requires an unbroken path of PTM-supporting devices between the PTM
Root and the ultimate PTM Requester, but if a Switch supports PTM, only the
Upstream Port can have a PTM Capability; the Downstream Ports do not.
Previously we copied the PTM configuration from the Switch Upstream Port to
the Downstream Ports so dev->ptm_enabled for any device implied that all
the upstream devices support PTM.
Instead of making it look like Downstream Ports have their own PTM config,
add pci_upstream_ptm(), which returns the upstream device that has a PTM
Capability (either a Root Port or a Switch Upstream Port).
Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
---
drivers/pci/pcie/ptm.c | 39 +++++++++++++++++++++++++--------------
1 file changed, 25 insertions(+), 14 deletions(-)
diff --git a/drivers/pci/pcie/ptm.c b/drivers/pci/pcie/ptm.c
index 6ac7ff48be57..8729c3e452ee 100644
--- a/drivers/pci/pcie/ptm.c
+++ b/drivers/pci/pcie/ptm.c
@@ -76,6 +76,29 @@ void pci_restore_ptm_state(struct pci_dev *dev)
pci_write_config_word(dev, ptm + PCI_PTM_CTRL, *cap);
}
+/*
+ * If the next upstream device supports PTM, return it; otherwise return
+ * NULL. PTM Messages are local, so both link partners must support it.
+ */
+static struct pci_dev *pci_upstream_ptm(struct pci_dev *dev)
+{
+ struct pci_dev *ups = pci_upstream_bridge(dev);
+
+ /*
+ * Switch Downstream Ports are not permitted to have a PTM
+ * capability; their PTM behavior is controlled by the Upstream
+ * Port (PCIe r5.0, sec 7.9.16), so if the upstream bridge is a
+ * Switch Downstream Port, look up one more level.
+ */
+ if (ups && pci_pcie_type(ups) == PCI_EXP_TYPE_DOWNSTREAM)
+ ups = pci_upstream_bridge(ups);
+
+ if (ups && ups->ptm_cap)
+ return ups;
+
+ return NULL;
+}
+
void pci_ptm_init(struct pci_dev *dev)
{
int ptm;
@@ -95,19 +118,6 @@ void pci_ptm_init(struct pci_dev *dev)
pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END))
return;
- /*
- * Switch Downstream Ports are not permitted to have a PTM
- * capability; their PTM behavior is controlled by the Upstream
- * Port (PCIe r5.0, sec 7.9.16).
- */
- ups = pci_upstream_bridge(dev);
- if (pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM &&
- ups && ups->ptm_enabled) {
- dev->ptm_granularity = ups->ptm_granularity;
- dev->ptm_enabled = 1;
- return;
- }
-
ptm = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_PTM);
if (!ptm)
return;
@@ -124,6 +134,7 @@ void pci_ptm_init(struct pci_dev *dev)
* the spec recommendation (PCIe r3.1, sec 7.32.3), select the
* furthest upstream Time Source as the PTM Root.
*/
+ ups = pci_upstream_ptm(dev);
if (ups && ups->ptm_enabled) {
ctrl = PCI_PTM_CTRL_ENABLE;
if (ups->ptm_granularity == 0)
@@ -173,7 +184,7 @@ int pci_enable_ptm(struct pci_dev *dev, u8 *granularity)
* associate the endpoint with a time source.
*/
if (pci_pcie_type(dev) == PCI_EXP_TYPE_ENDPOINT) {
- ups = pci_upstream_bridge(dev);
+ ups = pci_upstream_ptm(dev);
if (!ups || !ups->ptm_enabled)
return -EINVAL;
--
2.25.1
