In accordance with the way the device DT-node is actually defined in
arch/arm64/boot/dts/toshiba/tmpv7708.dtsi and the way the device is probed
by the DW PCIe driver there are two IRQs it actually has. It's MSI IRQ the
DT-bindings lack. Let's extend the interrupts property constraints then
and fix the schema example so one would be acceptable by the actual device
DT-bindings.
Fixes: 17c1b16340f0 ("dt-bindings: pci: Add DT binding for Toshiba Visconti PCIe controller")
Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
---
Changelog v5:
- This is a new patch added on the v5 release of the patchset.
---
.../devicetree/bindings/pci/toshiba,visconti-pcie.yaml | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
index 30b6396d83c8..aea0e2bcdd77 100644
--- a/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
@@ -36,7 +36,7 @@ properties:
- const: mpu
interrupts:
- maxItems: 1
+ maxItems: 2
clocks:
items:
@@ -94,8 +94,9 @@ examples:
#interrupt-cells = <1>;
ranges = <0x81000000 0 0x40000000 0 0x40000000 0 0x00010000>,
<0x82000000 0 0x50000000 0 0x50000000 0 0x20000000>;
- interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "intr";
+ interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi", "intr";
interrupt-map-mask = <0 0 0 7>;
interrupt-map =
<0 0 0 1 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
--
2.35.1
