[PATCH v2 2/6] dt-bindings: PCI: microchip,pcie-host: fix missing clocks properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>

Recent versions of dt-schema warn about unevaluatedProperties:
arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dtb: pcie@2000000000: Unevaluated properties are not allowed ('clock-names', 'clocks', 'legacy-interrupt-controller', 'microchip,axi-m-atr0' were unexpected)
        From schema: Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml

The clocks are required to enable interfaces between the FPGA fabric
and the core complex, so add them to the binding.

Fixes: 6ee6c89aac35 ("dt-bindings: PCI: microchip: Add Microchip PolarFire host binding")
Signed-off-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
---
dt-schema v2022.08 is required to replicate
---
 .../bindings/pci/microchip,pcie-host.yaml     | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
index edb4f81253c8..6bbde8693ef8 100644
--- a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
+++ b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
@@ -25,6 +25,31 @@ properties:
       - const: cfg
       - const: apb
 
+  clocks:
+    description:
+      Fabric Interface Controllers, FICs, are the interface between the FPGA
+      fabric and the core complex on PolarFire SoC. The FICs require two clocks,
+      one from each side of the interface. The "FIC clocks" described by this
+      property are on the core complex side & communication through a FIC is not
+      possible unless it's corresponding clock is enabled. A clock must be
+      enabled for each of the interfaces the root port is connected through.
+      This could in theory be all 4 interfaces, one interface or any combination
+      in between.
+    minItems: 1
+    items:
+      - description: FIC0's clock
+      - description: FIC1's clock
+      - description: FIC2's clock
+      - description: FIC3's clock
+
+  clock-names:
+    description:
+      As any FIC connection combination is possible, the names should match the
+      order in the clocks property and take the form "ficN" where N is a number
+      0-3
+    minItems: 1
+    maxItems: 4
+
   interrupts:
     minItems: 1
     items:
-- 
2.37.1




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux