Re: Why set .suppress_bind_attrs even though .remove() implemented?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jul 22, 2022 at 06:06:07PM +0100, Marc Zyngier wrote:
> On Fri, 22 Jul 2022 15:39:05 +0100,
> Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote:
> > 
> > [+cc Marc, can you clarify when we need irq_dispose_mapping()?]
> 
> In general, interrupt controllers should not have to discard mappings
> themselves, just like they rarely create mappings themselves. That's
> usually a different layer that has created it (DT, for example).
> 
> The problem is that these mappings persist even if the interrupt has
> been released by the driver (it called free_irq()), and the IRQ number
> can be further reused. The client driver could dispose of the mapping
> after having released the IRQ, but nobody does that in practice.
> 
> From the point of view of the controller, there is no simple way to
> tell when an interrupt is "unused". And even if a driver was
> overzealous and called irq_dispose_mapping() on all the possible
> mappings (and made sure no mapping could be created in parallel), this
> could result in a bunch of dangling pointers should a client driver
> still have the interrupt requested.
> 
> Fixing this is pretty hard, as IRQ descriptors are leaky (you can
> either have a pointer to one, or just an IRQ number -- they are
> strictly equivalent). So in general, being able to remove an interrupt
> controller driver is at best fragile, and I'm trying not to get more
> of this in the tree.

Thank you!

How do we identify an interrupt controller driver?  Apparently some of
these PCIe controller drivers also include an interrupt controller
driver, but I don't know what to look for to find them.

Bjorn



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux