We need to take some code in brcm_pcie_setup() and put it in a new function brcm_pcie_linkup(). In future commits the brcm_pcie_linkup() function will be called indirectly by pci_host_probe() as opposed to the host driver invoking it directly. Some code that was executed after the PCIe linkup is now placed so that it executes prior to linkup, since this code has to run prior to the invocation of pci_host_probe(). Link: https://lore.kernel.org/r/20220106160332.2143-5-jim2101024@xxxxxxxxx Signed-off-by: Jim Quinlan <jim2101024@xxxxxxxxx> --- drivers/pci/controller/pcie-brcmstb.c | 69 +++++++++++++++++---------- 1 file changed, 43 insertions(+), 26 deletions(-) diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c index e61058e13818..2bf5cc399fd0 100644 --- a/drivers/pci/controller/pcie-brcmstb.c +++ b/drivers/pci/controller/pcie-brcmstb.c @@ -926,16 +926,9 @@ static inline int brcm_pcie_get_rc_bar2_size_and_offset(struct brcm_pcie *pcie, static int brcm_pcie_setup(struct brcm_pcie *pcie) { - struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie); u64 rc_bar2_offset, rc_bar2_size; void __iomem *base = pcie->base; - struct device *dev = pcie->dev; - struct resource_entry *entry; - bool ssc_good = false; - struct resource *res; - int num_out_wins = 0; - u16 nlw, cls, lnksta; - int i, ret, memc; + int ret, memc; u32 tmp, burst, aspm_support; /* Reset the bridge */ @@ -1025,6 +1018,40 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie) if (pcie->gen) brcm_pcie_set_gen(pcie, pcie->gen); + /* Don't advertise L0s capability if 'aspm-no-l0s' */ + aspm_support = PCIE_LINK_STATE_L1; + if (!of_property_read_bool(pcie->np, "aspm-no-l0s")) + aspm_support |= PCIE_LINK_STATE_L0S; + tmp = readl(base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY); + u32p_replace_bits(&tmp, aspm_support, + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_ASPM_SUPPORT_MASK); + writel(tmp, base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY); + + /* + * For config space accesses on the RC, show the right class for + * a PCIe-PCIe bridge (the default setting is to be EP mode). + */ + tmp = readl(base + PCIE_RC_CFG_PRIV1_ID_VAL3); + u32p_replace_bits(&tmp, 0x060400, + PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK); + writel(tmp, base + PCIE_RC_CFG_PRIV1_ID_VAL3); + + return 0; +} + +static int brcm_pcie_linkup(struct brcm_pcie *pcie) +{ + struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie); + struct device *dev = pcie->dev; + void __iomem *base = pcie->base; + struct resource_entry *entry; + struct resource *res; + int num_out_wins = 0; + u16 nlw, cls, lnksta; + bool ssc_good = false; + u32 tmp; + int ret, i; + /* Unassert the fundamental reset */ pcie->perst_set(pcie, 0); @@ -1075,24 +1102,6 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie) num_out_wins++; } - /* Don't advertise L0s capability if 'aspm-no-l0s' */ - aspm_support = PCIE_LINK_STATE_L1; - if (!of_property_read_bool(pcie->np, "aspm-no-l0s")) - aspm_support |= PCIE_LINK_STATE_L0S; - tmp = readl(base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY); - u32p_replace_bits(&tmp, aspm_support, - PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_ASPM_SUPPORT_MASK); - writel(tmp, base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY); - - /* - * For config space accesses on the RC, show the right class for - * a PCIe-PCIe bridge (the default setting is to be EP mode). - */ - tmp = readl(base + PCIE_RC_CFG_PRIV1_ID_VAL3); - u32p_replace_bits(&tmp, 0x060400, - PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK); - writel(tmp, base + PCIE_RC_CFG_PRIV1_ID_VAL3); - if (pcie->ssc) { ret = brcm_pcie_set_ssc(pcie); if (ret == 0) @@ -1281,6 +1290,10 @@ static int brcm_pcie_resume(struct device *dev) if (ret) goto err_reset; + ret = brcm_pcie_linkup(pcie); + if (ret) + goto err_reset; + if (pcie->msi) brcm_msi_set_regs(pcie->msi); @@ -1398,6 +1411,10 @@ static int brcm_pcie_probe(struct platform_device *pdev) if (ret) goto fail; + ret = brcm_pcie_linkup(pcie); + if (ret) + goto fail; + pcie->hw_rev = readl(pcie->base + PCIE_MISC_REVISION); if (pcie->type == BCM4908 && pcie->hw_rev >= BRCM_PCIE_HW_REV_3_20) { dev_err(pcie->dev, "hardware revision with unsupported PERST# setup\n"); -- 2.17.1
