[PATCH v2 1/3] PCI: qcom: Add sc7280 aggre0, aggre1 and ddr sf tbu clocks in PCIe driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add missing aggre0, aggre1 and ddrs sf tbu clocks in PCIe driver.

If these clocks are not voted-on, then PCIe link is going down when system
is suspended as these clocks can get turned off.

And these clocks are needed only on sc7280 target.

Signed-off-by: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 2ea1375..a7202f0 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -1548,7 +1548,10 @@ static const struct qcom_pcie_cfg sm8450_pcie1_cfg = {
 static const struct qcom_pcie_cfg sc7280_cfg = {
 	.ops = &ops_1_9_0,
 	.has_tbu_clk = true,
+	.has_ddrss_sf_tbu_clk = true,
 	.pipe_clk_need_muxing = true,
+	.has_aggre0_clk = true,
+	.has_aggre1_clk = true,
 };
 
 static const struct qcom_pcie_cfg sc8180x_cfg = {
-- 
2.7.4




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux