From: Thierry Reding <treding@xxxxxxxxxx> Convert the Tegra194 PCIe bindings from the free-form text format to json-schema. Signed-off-by: Vidya Sagar <vidyas@xxxxxxxxxx> Signed-off-by: Thierry Reding <treding@xxxxxxxxxx> --- V3: * New patch in this series. Added as part of addressing Rob's review comment to convert the existing .txt file to .yaml schema .../bindings/pci/nvidia,tegra194-pcie-ep.yaml | 239 ++++++++++++++++ .../bindings/pci/nvidia,tegra194-pcie.txt | 245 ----------------- .../bindings/pci/nvidia,tegra194-pcie.yaml | 254 ++++++++++++++++++ .../devicetree/bindings/pci/snps,dw-pcie.yaml | 2 +- 4 files changed, 494 insertions(+), 246 deletions(-) create mode 100644 Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml delete mode 100644 Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt create mode 100644 Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml new file mode 100644 index 000000000000..4f7cb7fe378e --- /dev/null +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml @@ -0,0 +1,239 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/nvidia,tegra194-pcie-ep.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra194 (and later) PCIe endpoint controller (Synopsys DesignWare Core based) + +maintainers: + - Thierry Reding <thierry.reding@xxxxxxxxx> + - Jon Hunter <jonathanh@xxxxxxxxxx> + - Vidya Sagar <vidyas@xxxxxxxxxx> + +description: | + This PCIe controller is based on the Synopsis Designware PCIe IP and thus inherits all the common + properties defined in snps,dw-pcie-ep.yaml. Some of the controller instances are dual mode where + in they can work either in root port mode or endpoint mode but one at a time. + + On Tegra194, controllers C0, C4 and C5 support endpoint mode. + + Note: On Tegra194's P2972-0000 platform, only C5 controller can be enabled to operate in the + endpoint mode because of the way the platform is designed. + +properties: + compatible: + enum: + - nvidia,tegra194-pcie-ep + + reg: + items: + - description: controller's application logic registers + - description: iATU and DMA registers. This is where the iATU (internal Address Translation + Unit) registers of the PCIe core are made available for software access. + - description: The aperture where the root port's own configuration registers are available. + - description: Aperture used to map the remote root-complex' address space. + + reg-names: + items: + - const: appl + - const: atu_dma + - const: dbi + - const: addr_space + + interrupts: + items: + - description: controller interrupt + + interrupt-names: + items: + - const: intr + + clocks: + items: + - description: module clock + + clock-names: + items: + - const: core + + resets: + items: + - description: APB bus interface reset + - description: module reset + + reset-names: + items: + - const: apb + - const: core + + reset-gpios: + description: Must contain a phandle to a GPIO controller followed by GPIO that is being used as + PERST input signal. Please refer to pci.txt document. + + phys: + minItems: 1 + maxItems: 16 + + phy-names: + minItems: 1 + maxItems: 16 + items: + pattern: "^p2u-[0-9]+$" + + power-domains: + description: | + A phandle to the node that controls power to the respective PCIe controller and a specifier + name for the PCIe controller. Following are the specifiers for the different PCIe + controllers: + + - TEGRA194_POWER_DOMAIN_PCIEX8B: C0 + - TEGRA194_POWER_DOMAIN_PCIEX1A: C1 + - TEGRA194_POWER_DOMAIN_PCIEX1A: C2 + - TEGRA194_POWER_DOMAIN_PCIEX1A: C3 + - TEGRA194_POWER_DOMAIN_PCIEX4A: C4 + - TEGRA194_POWER_DOMAIN_PCIEX8A: C5 + + these specifiers are defined in "include/dt-bindings/power/tegra194-powergate.h" file. + + interconnects: + items: + - description: memory read client + - description: memory write client + + interconnect-names: + items: + - const: dma-mem # read + - const: write + + dma-coherent: true + + num-ib-windows: + description: number of inbound address translation windows + maxItems: 1 + deprecated: true + + num-ob-windows: + description: number of outbound address translation windows + maxItems: 1 + deprecated: true + + nvidia,bpmp: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: | + Must contain a pair of phandle to BPMP controller node followed by controller ID. Following + are the controller IDs for each controller: + + 0: C0 + 1: C1 + 2: C2 + 3: C3 + 4: C4 + 5: C5 + items: + - items: + - minimum: 0 + maximum: 0xffffffff + - enum: [ 0, 1, 2, 3, 4, 5 ] + + nvidia,aspm-cmrt-us: + description: Common Mode Restore Time for proper operation of ASPM to be specified in + microseconds + + nvidia,aspm-pwr-on-t-us: + description: Power On time for proper operation of ASPM to be specified in microseconds + + nvidia,aspm-l0s-entrance-latency-us: + description: ASPM L0s entrance latency to be specified in microseconds + + vddio-pex-ctl-supply: + description: A phandle to the regulator supply for PCIe side band signals. + + nvidia,refclk-select-gpios: + description: Must contain a phandle to a GPIO controller followed by GPIO that is being used to + enable REFCLK to controller from host + $ref: /schemas/types.yaml#/definitions/phandle-array + +allOf: + - $ref: "/schemas/pci/pci-ep.yaml#" + +unevaluatedProperties: false + +required: + - compatible + - reg + - reg-names + - num-ib-windows + - num-ob-windows + - interrupts + - interrupt-names + - clocks + - clock-names + - resets + - reset-names + - power-domains + - reset-gpios + - num-lanes + - phys + - phy-names + - nvidia,bpmp + +examples: + - | + #include <dt-bindings/clock/tegra194-clock.h> + #include <dt-bindings/gpio/tegra194-gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/tegra194-powergate.h> + #include <dt-bindings/reset/tegra194-reset.h> + + bus@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x8 0x0>; + + pcie-ep@141a0000 { + compatible = "nvidia,tegra194-pcie-ep"; + reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K) */ + <0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G) */ + reg-names = "appl", "atu_dma", "dbi", "addr_space"; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + interrupt-names = "intr"; + + clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>; + clock-names = "core"; + + resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>, + <&bpmp TEGRA194_RESET_PEX1_CORE_5>; + reset-names = "apb", "core"; + + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>; + pinctrl-names = "default"; + pinctrl-0 = <&clkreq_c5_bi_dir_state>; + + nvidia,bpmp = <&bpmp 5>; + + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + vddio-pex-ctl-supply = <&vdd_1v8ao>; + + reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>; + + nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5) + GPIO_ACTIVE_HIGH>; + + num-lanes = <8>; + num-ib-windows = <2>; + num-ob-windows = <8>; + + phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, + <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, + <&p2u_nvhs_6>, <&p2u_nvhs_7>; + + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", + "p2u-5", "p2u-6", "p2u-7"; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt deleted file mode 100644 index 8e4f9bfb316d..000000000000 --- a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt +++ /dev/null @@ -1,245 +0,0 @@ -NVIDIA Tegra PCIe controller (Synopsys DesignWare Core based) - -This PCIe controller is based on the Synopsis Designware PCIe IP -and thus inherits all the common properties defined in snps,dw-pcie.yaml and -snps,dw-pcie-ep.yaml. -Some of the controller instances are dual mode where in they can work either -in root port mode or endpoint mode but one at a time. - -Required properties: -- power-domains: A phandle to the node that controls power to the respective - PCIe controller and a specifier name for the PCIe controller. Following are - the specifiers for the different PCIe controllers - TEGRA194_POWER_DOMAIN_PCIEX8B: C0 - TEGRA194_POWER_DOMAIN_PCIEX1A: C1 - TEGRA194_POWER_DOMAIN_PCIEX1A: C2 - TEGRA194_POWER_DOMAIN_PCIEX1A: C3 - TEGRA194_POWER_DOMAIN_PCIEX4A: C4 - TEGRA194_POWER_DOMAIN_PCIEX8A: C5 - these specifiers are defined in - "include/dt-bindings/power/tegra194-powergate.h" file. -- reg: A list of physical base address and length pairs for each set of - controller registers. Must contain an entry for each entry in the reg-names - property. -- reg-names: Must include the following entries: - "appl": Controller's application logic registers - "config": As per the definition in snps,dw-pcie.yaml - "atu_dma": iATU and DMA registers. This is where the iATU (internal Address - Translation Unit) registers of the PCIe core are made available - for SW access. - "dbi": The aperture where root port's own configuration registers are - available -- interrupts: A list of interrupt outputs of the controller. Must contain an - entry for each entry in the interrupt-names property. -- interrupt-names: Must include the following entries: - "intr": The Tegra interrupt that is asserted for controller interrupts -- clocks: Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names: Must include the following entries: - - core -- resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names: Must include the following entries: - - apb - - core -- phys: Must contain a phandle to P2U PHY for each entry in phy-names. -- phy-names: Must include an entry for each active lane. - "p2u-N": where N ranges from 0 to one less than the total number of lanes -- nvidia,bpmp: Must contain a pair of phandle to BPMP controller node followed - by controller-id. Following are the controller ids for each controller. - 0: C0 - 1: C1 - 2: C2 - 3: C3 - 4: C4 - 5: C5 -- vddio-pex-ctl-supply: Regulator supply for PCIe side band signals - -RC mode: -- compatible: Tegra19x must contain "nvidia,tegra194-pcie" -- device_type: Must be "pci" for RC mode -- interrupt-names: Must include the following entries: - "msi": The Tegra interrupt that is asserted when an MSI is received -- bus-range: Range of bus numbers associated with this controller -- #address-cells: Address representation for root ports (must be 3) - - cell 0 specifies the bus and device numbers of the root port: - [23:16]: bus number - [15:11]: device number - - cell 1 denotes the upper 32 address bits and should be 0 - - cell 2 contains the lower 32 address bits and is used to translate to the - CPU address space -- #size-cells: Size representation for root ports (must be 2) -- ranges: Describes the translation of addresses for root ports and standard - PCI regions. The entries must be 7 cells each, where the first three cells - correspond to the address as described for the #address-cells property - above, the fourth and fifth cells are for the physical CPU address to - translate to and the sixth and seventh cells are as described for the - #size-cells property above. - - Entries setup the mapping for the standard I/O, memory and - prefetchable PCI regions. The first cell determines the type of region - that is setup: - - 0x81000000: I/O memory region - - 0x82000000: non-prefetchable memory region - - 0xc2000000: prefetchable memory region - Please refer to the standard PCI bus binding document for a more detailed - explanation. -- #interrupt-cells: Size representation for interrupts (must be 1) -- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties - Please refer to the standard PCI bus binding document for a more detailed - explanation. - -EP mode: -In Tegra194, Only controllers C0, C4 & C5 support EP mode. -- compatible: Tegra19x must contain "nvidia,tegra194-pcie-ep" -- reg-names: Must include the following entries: - "addr_space": Used to map remote RC address space -- reset-gpios: Must contain a phandle to a GPIO controller followed by - GPIO that is being used as PERST input signal. Please refer to pci.txt - document. - -Optional properties: -- pinctrl-names: A list of pinctrl state names. - It is mandatory for C5 controller and optional for other controllers. - - "default": Configures PCIe I/O for proper operation. -- pinctrl-0: phandle for the 'default' state of pin configuration. - It is mandatory for C5 controller and optional for other controllers. -- supports-clkreq: Refer to Documentation/devicetree/bindings/pci/pci.txt -- nvidia,update-fc-fixup: This is a boolean property and needs to be present to - improve performance when a platform is designed in such a way that it - satisfies at least one of the following conditions thereby enabling root - port to exchange optimum number of FC (Flow Control) credits with - downstream devices - 1. If C0/C4/C5 run at x1/x2 link widths (irrespective of speed and MPS) - 2. If C0/C1/C2/C3/C4/C5 operate at their respective max link widths and - a) speed is Gen-2 and MPS is 256B - b) speed is >= Gen-3 with any MPS -- nvidia,aspm-cmrt-us: Common Mode Restore Time for proper operation of ASPM - to be specified in microseconds -- nvidia,aspm-pwr-on-t-us: Power On time for proper operation of ASPM to be - specified in microseconds -- nvidia,aspm-l0s-entrance-latency-us: ASPM L0s entrance latency to be - specified in microseconds - -RC mode: -- vpcie3v3-supply: A phandle to the regulator node that supplies 3.3V to the slot - if the platform has one such slot. (Ex:- x16 slot owned by C5 controller - in p2972-0000 platform). -- vpcie12v-supply: A phandle to the regulator node that supplies 12V to the slot - if the platform has one such slot. (Ex:- x16 slot owned by C5 controller - in p2972-0000 platform). - -EP mode: -- nvidia,refclk-select-gpios: Must contain a phandle to a GPIO controller - followed by GPIO that is being used to enable REFCLK to controller from host - -NOTE:- On Tegra194's P2972-0000 platform, only C5 controller can be enabled to -operate in the endpoint mode because of the way the platform is designed. - -Examples: -========= - -Tegra194 RC mode: ------------------ - - pcie@14180000 { - compatible = "nvidia,tegra194-pcie"; - power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>; - reg = <0x00 0x14180000 0x0 0x00020000 /* appl registers (128K) */ - 0x00 0x38000000 0x0 0x00040000 /* configuration space (256K) */ - 0x00 0x38040000 0x0 0x00040000>; /* iATU_DMA reg space (256K) */ - reg-names = "appl", "config", "atu_dma"; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - num-lanes = <8>; - linux,pci-domain = <0>; - - pinctrl-names = "default"; - pinctrl-0 = <&pex_rst_c5_out_state>, <&clkreq_c5_bi_dir_state>; - - clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>; - clock-names = "core"; - - resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>, - <&bpmp TEGRA194_RESET_PEX0_CORE_0>; - reset-names = "apb", "core"; - - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ - <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ - interrupt-names = "intr", "msi"; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; - - nvidia,bpmp = <&bpmp 0>; - - supports-clkreq; - nvidia,aspm-cmrt-us = <60>; - nvidia,aspm-pwr-on-t-us = <20>; - nvidia,aspm-l0s-entrance-latency-us = <3>; - - bus-range = <0x0 0xff>; - ranges = <0x81000000 0x0 0x38100000 0x0 0x38100000 0x0 0x00100000 /* downstream I/O (1MB) */ - 0x82000000 0x0 0x38200000 0x0 0x38200000 0x0 0x01E00000 /* non-prefetchable memory (30MB) */ - 0xc2000000 0x18 0x00000000 0x18 0x00000000 0x4 0x00000000>; /* prefetchable memory (16GB) */ - - vddio-pex-ctl-supply = <&vdd_1v8ao>; - vpcie3v3-supply = <&vdd_3v3_pcie>; - vpcie12v-supply = <&vdd_12v_pcie>; - - phys = <&p2u_hsio_2>, <&p2u_hsio_3>, <&p2u_hsio_4>, - <&p2u_hsio_5>; - phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3"; - }; - -Tegra194 EP mode: ------------------ - - pcie-ep@141a0000 { - compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep"; - power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>; - reg = <0x00 0x141a0000 0x0 0x00020000 /* appl registers (128K) */ - 0x00 0x3a040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ - 0x00 0x3a080000 0x0 0x00040000 /* DBI reg space (256K) */ - 0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G) */ - reg-names = "appl", "atu_dma", "dbi", "addr_space"; - - num-lanes = <8>; - num-ib-windows = <2>; - num-ob-windows = <8>; - - pinctrl-names = "default"; - pinctrl-0 = <&clkreq_c5_bi_dir_state>; - - clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>; - clock-names = "core"; - - resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>, - <&bpmp TEGRA194_RESET_PEX1_CORE_5>; - reset-names = "apb", "core"; - - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ - interrupt-names = "intr"; - - nvidia,bpmp = <&bpmp 5>; - - nvidia,aspm-cmrt-us = <60>; - nvidia,aspm-pwr-on-t-us = <20>; - nvidia,aspm-l0s-entrance-latency-us = <3>; - - vddio-pex-ctl-supply = <&vdd_1v8ao>; - - reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>; - - nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5) - GPIO_ACTIVE_HIGH>; - - phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, - <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, - <&p2u_nvhs_6>, <&p2u_nvhs_7>; - - phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", - "p2u-5", "p2u-6", "p2u-7"; - }; diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml new file mode 100644 index 000000000000..4a49dddf33bb --- /dev/null +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml @@ -0,0 +1,254 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/nvidia,tegra194-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra194 (and later) PCIe controller (Synopsys DesignWare Core based) + +maintainers: + - Thierry Reding <thierry.reding@xxxxxxxxx> + - Jon Hunter <jonathanh@xxxxxxxxxx> + - Vidya Sagar <vidyas@xxxxxxxxxx> + +description: | + This PCIe controller is based on the Synopsis Designware PCIe IP and thus inherits all the common + properties defined in snps,dw-pcie.yaml. Some of the controller instances are dual mode where in + they can work either in root port mode or endpoint mode but one at a time. + + See nvidia,tegra194-pcie-ep.yaml for details on the endpoint mode device tree bindings. + +properties: + compatible: + enum: + - nvidia,tegra194-pcie + + reg: + items: + - description: controller's application logic registers + - description: configuration registers + - description: iATU and DMA registers. This is where the iATU (internal Address Translation + Unit) registers of the PCIe core are made available for software access. + - description: The aperture where the root port's own configuration registers are available. + + reg-names: + items: + - const: appl + - const: config + - const: atu_dma + - const: dbi + + interrupts: + items: + - description: controller interrupt + - description: MSI interrupt + + interrupt-names: + items: + - const: intr + - const: msi + + clocks: + items: + - description: module clock + + clock-names: + items: + - const: core + + resets: + items: + - description: APB bus interface reset + - description: module reset + + reset-names: + items: + - const: apb + - const: core + + phys: + minItems: 1 + maxItems: 16 + + phy-names: + minItems: 1 + maxItems: 16 + items: + pattern: "^p2u-[0-9]+$" + + power-domains: + description: | + A phandle to the node that controls power to the respective PCIe controller and a specifier + name for the PCIe controller. Following are the specifiers for the different PCIe + controllers: + + - TEGRA194_POWER_DOMAIN_PCIEX8B: C0 + - TEGRA194_POWER_DOMAIN_PCIEX1A: C1 + - TEGRA194_POWER_DOMAIN_PCIEX1A: C2 + - TEGRA194_POWER_DOMAIN_PCIEX1A: C3 + - TEGRA194_POWER_DOMAIN_PCIEX4A: C4 + - TEGRA194_POWER_DOMAIN_PCIEX8A: C5 + + these specifiers are defined in "include/dt-bindings/power/tegra194-powergate.h" file. + + interconnects: + items: + - description: memory read client + - description: memory write client + + interconnect-names: + items: + - const: dma-mem # read + - const: write + + dma-coherent: true + + supports-clkreq: + description: see pci.txt for details + + nvidia,bpmp: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: | + Must contain a pair of phandle to BPMP controller node followed by controller ID. Following + are the controller IDs for each controller: + + 0: C0 + 1: C1 + 2: C2 + 3: C3 + 4: C4 + 5: C5 + items: + - items: + - minimum: 0 + maximum: 0xffffffff + - enum: [ 0, 1, 2, 3, 4, 5 ] + + nvidia,update-fc-fixup: + description: | + This is a boolean property and needs to be present to improve performance when a platform is + designed in such a way that it satisfies at least one of the following conditions thereby + enabling root port to exchange optimum number of FC (Flow Control) credits with downstream + devices: + + 1. If C0/C4/C5 run at x1/x2 link widths (irrespective of speed and MPS) + 2. If C0/C1/C2/C3/C4/C5 operate at their respective max link widths and + a) speed is Gen-2 and MPS is 256B + b) speed is >= Gen-3 with any MPS + + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,aspm-cmrt-us: + description: Common Mode Restore Time for proper operation of ASPM to be specified in + microseconds + + nvidia,aspm-pwr-on-t-us: + description: Power On time for proper operation of ASPM to be specified in microseconds + + nvidia,aspm-l0s-entrance-latency-us: + description: ASPM L0s entrance latency to be specified in microseconds + + vddio-pex-ctl-supply: + description: A phandle to the regulator supply for PCIe side band signals. + + vpcie3v3-supply: + description: A phandle to the regulator node that supplies 3.3V to the slot if the platform has + one such slot. (Ex:- x16 slot owned by C5 controller in p2972-0000 platform). + + vpcie12v-supply: + description: A phandle to the regulator node that supplies 12V to the slot if the platform has + one such slot. (Ex:- x16 slot owned by C5 controller in p2972-0000 platform). + +allOf: + - $ref: "/schemas/pci/pci-bus.yaml#" + - $ref: "/schemas/pci/snps,dw-pcie.yaml#" + +unevaluatedProperties: false + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + - interrupt-map + - interrupt-map-mask + - clocks + - clock-names + - resets + - reset-names + - power-domains + - bus-range + - ranges + - vddio-pex-ctl-supply + - num-lanes + - phys + - phy-names + - nvidia,bpmp + +examples: + - | + #include <dt-bindings/clock/tegra194-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/tegra194-powergate.h> + #include <dt-bindings/reset/tegra194-reset.h> + + bus@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x8 0x0>; + + pcie@14180000 { + compatible = "nvidia,tegra194-pcie"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>; + reg = <0x0 0x14180000 0x0 0x00020000>, /* appl registers (128K) */ + <0x0 0x38000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x0 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x0 0x38080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <8>; + linux,pci-domain = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&pex_rst_c5_out_state>, <&clkreq_c5_bi_dir_state>; + + clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>; + clock-names = "core"; + + resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>, + <&bpmp TEGRA194_RESET_PEX0_CORE_0>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 0>; + + supports-clkreq; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x38100000 0x0 0x38100000 0x0 0x00100000>, /* downstream I/O */ + <0x82000000 0x0 0x38200000 0x0 0x38200000 0x0 0x01e00000>, /* non-prefetch memory */ + <0xc2000000 0x18 0x00000000 0x18 0x00000000 0x4 0x00000000>; /* prefetchable memory */ + + vddio-pex-ctl-supply = <&vdd_1v8ao>; + vpcie3v3-supply = <&vdd_3v3_pcie>; + vpcie12v-supply = <&vdd_12v_pcie>; + + phys = <&p2u_hsio_2>, <&p2u_hsio_3>, <&p2u_hsio_4>, + <&p2u_hsio_5>; + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3"; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml index c90e5e2d25f6..7e0bf941fbfe 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml @@ -35,7 +35,7 @@ properties: maxItems: 5 items: enum: [ dbi, dbi2, config, atu, app, elbi, mgmt, ctrl, parf, cfg, link, - ulreg, smu, mpu, apb, phy ] + ulreg, smu, mpu, apb, phy, appl, atu_dma ] num-lanes: description: | -- 2.17.1
