[PATCH v4 1/2] PCI: qcom: Move IPQ8074 DBI register accesses after phy_power_on()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Currently the Gen2 port in IPQ8074 will cause the system to hang as it
accesses DBI registers in qcom_pcie_init_2_3_3(), and those are only
accesible after phy_power_on().

Move the DBI read/writes to a new qcom_pcie_post_init_2_3_3(), which is
executed after phy_power_on().

Fixes: a0fd361db8e5 ("PCI: dwc: Move "dbi", "dbi2", and "addr_space" resource setup into common code")
Signed-off-by: Robert Marko <robimarko@xxxxxxxxx>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
Changes in v4:
* Correct title and description

Changes in v3:
* Make sure it applies onto 5.19-rc3
* Update the commit description to make it clear this only affects the
Gen2 port

Changes in v2:
* Rebase onto next-20220621
---
 drivers/pci/controller/dwc/pcie-qcom.c | 48 +++++++++++++++-----------
 1 file changed, 28 insertions(+), 20 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index a1f1aca2fb59..24708d5d817d 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -1061,9 +1061,7 @@ static int qcom_pcie_init_2_3_3(struct qcom_pcie *pcie)
 	struct qcom_pcie_resources_2_3_3 *res = &pcie->res.v2_3_3;
 	struct dw_pcie *pci = pcie->pci;
 	struct device *dev = pci->dev;
-	u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
 	int i, ret;
-	u32 val;
 
 	for (i = 0; i < ARRAY_SIZE(res->rst); i++) {
 		ret = reset_control_assert(res->rst[i]);
@@ -1120,6 +1118,33 @@ static int qcom_pcie_init_2_3_3(struct qcom_pcie *pcie)
 		goto err_clk_aux;
 	}
 
+	return 0;
+
+err_clk_aux:
+	clk_disable_unprepare(res->ahb_clk);
+err_clk_ahb:
+	clk_disable_unprepare(res->axi_s_clk);
+err_clk_axi_s:
+	clk_disable_unprepare(res->axi_m_clk);
+err_clk_axi_m:
+	clk_disable_unprepare(res->iface);
+err_clk_iface:
+	/*
+	 * Not checking for failure, will anyway return
+	 * the original failure in 'ret'.
+	 */
+	for (i = 0; i < ARRAY_SIZE(res->rst); i++)
+		reset_control_assert(res->rst[i]);
+
+	return ret;
+}
+
+static int qcom_pcie_post_init_2_3_3(struct qcom_pcie *pcie)
+{
+	struct dw_pcie *pci = pcie->pci;
+	u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
+	u32 val;
+
 	writel(SLV_ADDR_SPACE_SZ,
 		pcie->parf + PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE);
 
@@ -1147,24 +1172,6 @@ static int qcom_pcie_init_2_3_3(struct qcom_pcie *pcie)
 		PCI_EXP_DEVCTL2);
 
 	return 0;
-
-err_clk_aux:
-	clk_disable_unprepare(res->ahb_clk);
-err_clk_ahb:
-	clk_disable_unprepare(res->axi_s_clk);
-err_clk_axi_s:
-	clk_disable_unprepare(res->axi_m_clk);
-err_clk_axi_m:
-	clk_disable_unprepare(res->iface);
-err_clk_iface:
-	/*
-	 * Not checking for failure, will anyway return
-	 * the original failure in 'ret'.
-	 */
-	for (i = 0; i < ARRAY_SIZE(res->rst); i++)
-		reset_control_assert(res->rst[i]);
-
-	return ret;
 }
 
 static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
@@ -1596,6 +1603,7 @@ static const struct qcom_pcie_ops ops_2_4_0 = {
 static const struct qcom_pcie_ops ops_2_3_3 = {
 	.get_resources = qcom_pcie_get_resources_2_3_3,
 	.init = qcom_pcie_init_2_3_3,
+	.post_init = qcom_pcie_post_init_2_3_3,
 	.deinit = qcom_pcie_deinit_2_3_3,
 	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
 };
-- 
2.36.1




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux