From: Selvam Sathappan Periakaruppan <quic_speriaka@xxxxxxxxxxx> IPQ60xx series of SoCs have one port of PCIe gen 3. Add support for that platform. The code is based on downstream[1] Codeaurora kernel v5.4 (branch win.linuxopenwrt.2.0). Split out the DBI registers access part from .init into .post_init. DBI registers are only accessible after phy_power_on(). [1] https://source.codeaurora.org/quic/qsdk/oss/kernel/linux-ipq-5.4/ Reviewed-by: Rob Herring <robh@xxxxxxxxxx> Acked-by: Stanimir Varbanov <svarbanov@xxxxxxxxxx> Tested-by: Robert Marko <robert.marko@xxxxxxxxxx> Signed-off-by: Selvam Sathappan Periakaruppan <quic_speriaka@xxxxxxxxxxx> Signed-off-by: Baruch Siach <baruch.siach@xxxxxxxxx> --- v8: * Add review, ack, and test tags from Rob, Stanimir, and Robert Addressed Johan Hovold's comments: * Drop reset assert on init error path * Code formatting cleanup v7: * Rebase on v5.19-rc1 (Bjorn Helgaas) v6: Address Bjorn Helgaas comments: * Rename PCIE_CAP_LINK1_VAL to PCIE_CAP_SLOT_VAL * Drop a vague comment about ASPM configuration * Add a comment about the source of delay periods v5: * Remove comments from qcom_pcie_init_2_9_0() (Bjorn Andersson) v4: * Rebase on v5.16-rc1 v3: * Drop speed setup; rely on generic code (Rob Herring) * Drop unused CLK_RATE macros (Bjorn Helgaas) * Minor formatting fixes (Bjorn Helgaas) * Add reference to downstream Codeaurora kernel tree (Bjorn Helgaas) v2: * Drop ATU configuration; rely on common code instead * Use more common register macros * Use bulk clk and reset APIs --- drivers/pci/controller/dwc/pcie-designware.h | 1 + drivers/pci/controller/dwc/pcie-qcom.c | 130 +++++++++++++++++++ 2 files changed, 131 insertions(+) diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h index ea87809ee298..279c3778a13b 100644 --- a/drivers/pci/controller/dwc/pcie-designware.h +++ b/drivers/pci/controller/dwc/pcie-designware.h @@ -76,6 +76,7 @@ #define GEN3_RELATED_OFF 0x890 #define GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL BIT(0) +#define GEN3_RELATED_OFF_RXEQ_RGRDLESS_RXTS BIT(13) #define GEN3_RELATED_OFF_GEN3_EQ_DISABLE BIT(16) #define GEN3_RELATED_OFF_RATE_SHADOW_SEL_SHIFT 24 #define GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK GENMASK(25, 24) diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index 5ad9be6372f4..a1f1aca2fb59 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -52,6 +52,10 @@ #define PCIE20_PARF_DBI_BASE_ADDR 0x168 #define PCIE20_PARF_SLV_ADDR_SPACE_SIZE 0x16C #define PCIE20_PARF_MHI_CLOCK_RESET_CTRL 0x174 +#define AHB_CLK_EN BIT(0) +#define MSTR_AXI_CLK_EN BIT(1) +#define BYPASS BIT(4) + #define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT 0x178 #define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2 0x1A8 #define PCIE20_PARF_LTSSM 0x1B0 @@ -184,6 +188,11 @@ struct qcom_pcie_resources_2_7_0 { struct clk *ref_clk_src; }; +struct qcom_pcie_resources_2_9_0 { + struct clk_bulk_data clks[5]; + struct reset_control *rst; +}; + union qcom_pcie_resources { struct qcom_pcie_resources_1_0_0 v1_0_0; struct qcom_pcie_resources_2_1_0 v2_1_0; @@ -191,6 +200,7 @@ union qcom_pcie_resources { struct qcom_pcie_resources_2_3_3 v2_3_3; struct qcom_pcie_resources_2_4_0 v2_4_0; struct qcom_pcie_resources_2_7_0 v2_7_0; + struct qcom_pcie_resources_2_9_0 v2_9_0; }; struct qcom_pcie; @@ -1315,6 +1325,112 @@ static void qcom_pcie_post_deinit_2_7_0(struct qcom_pcie *pcie) clk_disable_unprepare(res->pipe_clk); } +static int qcom_pcie_get_resources_2_9_0(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; + struct dw_pcie *pci = pcie->pci; + struct device *dev = pci->dev; + int ret; + + res->clks[0].id = "iface"; + res->clks[1].id = "axi_m"; + res->clks[2].id = "axi_s"; + res->clks[3].id = "axi_bridge"; + res->clks[4].id = "rchng"; + + ret = devm_clk_bulk_get(dev, ARRAY_SIZE(res->clks), res->clks); + if (ret < 0) + return ret; + + res->rst = devm_reset_control_array_get_exclusive(dev); + if (IS_ERR(res->rst)) + return PTR_ERR(res->rst); + + return 0; +} + +static void qcom_pcie_deinit_2_9_0(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; + + clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks); +} + +static int qcom_pcie_init_2_9_0(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; + struct device *dev = pcie->pci->dev; + int ret; + + ret = reset_control_assert(res->rst); + if (ret) { + dev_err(dev, "reset assert failed (%d)\n", ret); + return ret; + } + + /* + * Delay periods before and after reset deassert are working values + * from downstream Codeaurora kernel + */ + usleep_range(2000, 2500); + + ret = reset_control_deassert(res->rst); + if (ret) { + dev_err(dev, "reset deassert failed (%d)\n", ret); + return ret; + } + + usleep_range(2000, 2500); + + return clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks); +} + +static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie) +{ + struct dw_pcie *pci = pcie->pci; + u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); + u32 val; + int i; + + writel(SLV_ADDR_SPACE_SZ, + pcie->parf + PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE); + + val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL); + val &= ~BIT(0); + writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL); + + writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR); + + writel(DEVICE_TYPE_RC, pcie->parf + PCIE20_PARF_DEVICE_TYPE); + writel(BYPASS | MSTR_AXI_CLK_EN | AHB_CLK_EN, + pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL); + writel(GEN3_RELATED_OFF_RXEQ_RGRDLESS_RXTS | + GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL, + pci->dbi_base + GEN3_RELATED_OFF); + + writel(MST_WAKEUP_EN | SLV_WAKEUP_EN | MSTR_ACLK_CGC_DIS | + SLV_ACLK_CGC_DIS | CORE_CLK_CGC_DIS | + AUX_PWR_DET | L23_CLK_RMV_DIS | L1_CLK_RMV_DIS, + pcie->parf + PCIE20_PARF_SYS_CTRL); + + writel(0, pcie->parf + PCIE20_PARF_Q2A_FLUSH); + + dw_pcie_dbi_ro_wr_en(pci); + writel(PCIE_CAP_SLOT_VAL, pci->dbi_base + offset + PCI_EXP_SLTCAP); + + val = readl(pci->dbi_base + offset + PCI_EXP_LNKCAP); + val &= ~PCI_EXP_LNKCAP_ASPMS; + writel(val, pci->dbi_base + offset + PCI_EXP_LNKCAP); + + writel(PCI_EXP_DEVCTL2_COMP_TMOUT_DIS, pci->dbi_base + offset + + PCI_EXP_DEVCTL2); + + for (i = 0; i < 256; i++) + writel(0, pcie->parf + PCIE20_PARF_BDF_TO_SID_TABLE_N + (4 * i)); + + return 0; +} + static int qcom_pcie_link_up(struct dw_pcie *pci) { u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); @@ -1505,6 +1621,15 @@ static const struct qcom_pcie_ops ops_1_9_0 = { .config_sid = qcom_pcie_config_sid_sm8250, }; +/* Qcom IP rev.: 2.9.0 Synopsys IP rev.: 5.00a */ +static const struct qcom_pcie_ops ops_2_9_0 = { + .get_resources = qcom_pcie_get_resources_2_9_0, + .init = qcom_pcie_init_2_9_0, + .post_init = qcom_pcie_post_init_2_9_0, + .deinit = qcom_pcie_deinit_2_9_0, + .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable, +}; + static const struct qcom_pcie_cfg apq8084_cfg = { .ops = &ops_1_0_0, }; @@ -1569,6 +1694,10 @@ static const struct qcom_pcie_cfg sc8180x_cfg = { .has_tbu_clk = true, }; +static const struct qcom_pcie_cfg ipq6018_cfg = { + .ops = &ops_2_9_0, +}; + static const struct dw_pcie_ops dw_pcie_ops = { .link_up = qcom_pcie_link_up, .start_link = qcom_pcie_start_link, @@ -1679,6 +1808,7 @@ static const struct of_device_id qcom_pcie_match[] = { { .compatible = "qcom,pcie-sm8450-pcie0", .data = &sm8450_pcie0_cfg }, { .compatible = "qcom,pcie-sm8450-pcie1", .data = &sm8450_pcie1_cfg }, { .compatible = "qcom,pcie-sc7280", .data = &sc7280_cfg }, + { .compatible = "qcom,pcie-ipq6018", .data = &ipq6018_cfg }, { } }; -- 2.35.1
