Loongson PCH (LS7A chipset) will be used by both MIPS-based and LoongArch-based Loongson processors. MIPS-based Loongson uses FDT while LoongArch-base Loongson uses ACPI, this patch add ACPI init support for the driver in drivers/pci/controller/pci-loongson.c because it is currently FDT-only. LoongArch is a new RISC ISA, mainline support will come soon, and documentations are here (in translation): https://github.com/loongson/LoongArch-Documentation Signed-off-by: Huacai Chen <chenhuacai@xxxxxxxxxxx> --- drivers/acpi/pci_mcfg.c | 10 +++++ drivers/pci/controller/Kconfig | 2 +- drivers/pci/controller/pci-loongson.c | 62 +++++++++++++++++++++++++-- include/linux/pci-ecam.h | 1 + 4 files changed, 71 insertions(+), 4 deletions(-) diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c index 63b98eae5e75..860014b89b8e 100644 --- a/drivers/acpi/pci_mcfg.c +++ b/drivers/acpi/pci_mcfg.c @@ -172,6 +172,16 @@ static struct mcfg_fixup mcfg_quirks[] = { ALTRA_ECAM_QUIRK(1, 14), ALTRA_ECAM_QUIRK(1, 15), #endif /* ARM64 */ + +#ifdef CONFIG_LOONGARCH +#define LOONGSON_ECAM_MCFG(table_id, seg) \ + { "LOONGS", table_id, 1, seg, MCFG_BUS_ANY, &loongson_pci_ecam_ops } + + LOONGSON_ECAM_MCFG("\0", 0), + LOONGSON_ECAM_MCFG("LOONGSON", 0), + LOONGSON_ECAM_MCFG("\0", 1), + LOONGSON_ECAM_MCFG("LOONGSON", 1), +#endif /* LOONGARCH */ }; static char mcfg_oem_id[ACPI_OEM_ID_SIZE]; diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig index b8d96d38064d..9dbd73898b47 100644 --- a/drivers/pci/controller/Kconfig +++ b/drivers/pci/controller/Kconfig @@ -293,7 +293,7 @@ config PCI_HYPERV_INTERFACE config PCI_LOONGSON bool "LOONGSON PCI Controller" depends on MACH_LOONGSON64 || COMPILE_TEST - depends on OF + depends on OF || ACPI depends on PCI_QUIRKS default MACH_LOONGSON64 help diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c index 565453882ffe..a1222fc15454 100644 --- a/drivers/pci/controller/pci-loongson.c +++ b/drivers/pci/controller/pci-loongson.c @@ -9,6 +9,8 @@ #include <linux/of_pci.h> #include <linux/pci.h> #include <linux/pci_ids.h> +#include <linux/pci-acpi.h> +#include <linux/pci-ecam.h> #include "../pci.h" @@ -97,6 +99,18 @@ static void loongson_mrrs_quirk(struct pci_dev *dev) } DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, loongson_mrrs_quirk); +static struct loongson_pci *pci_bus_to_loongson_pci(struct pci_bus *bus) +{ + struct pci_config_window *cfg; + + if (acpi_disabled) + return (struct loongson_pci *)(bus->sysdata); + else { + cfg = bus->sysdata; + return (struct loongson_pci *)(cfg->priv); + } +} + static void __iomem *cfg1_map(struct loongson_pci *priv, int bus, unsigned int devfn, int where) { @@ -124,12 +138,14 @@ static void __iomem *pci_loongson_map_bus(struct pci_bus *bus, unsigned int devf int where) { unsigned char busnum = bus->number; - struct pci_host_bridge *bridge = pci_find_host_bridge(bus); - struct loongson_pci *priv = pci_host_bridge_priv(bridge); + struct loongson_pci *priv = pci_bus_to_loongson_pci(bus); + + if (pci_is_root_bus(bus)) + busnum = 0; /* * Do not read more than one device on the bus other than - * the host bus. For our hardware the root bus is always bus 0. + * the host bus. */ if (priv->data->flags & FLAG_DEV_FIX && !pci_is_root_bus(bus) && PCI_SLOT(devfn) > 0) @@ -146,6 +162,8 @@ static void __iomem *pci_loongson_map_bus(struct pci_bus *bus, unsigned int devf return NULL; } +#ifdef CONFIG_OF + static int loongson_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; @@ -259,3 +277,41 @@ static struct platform_driver loongson_pci_driver = { .probe = loongson_pci_probe, }; builtin_platform_driver(loongson_pci_driver); + +#endif + +#ifdef CONFIG_ACPI + +static int loongson_pci_ecam_init(struct pci_config_window *cfg) +{ + struct device *dev = cfg->parent; + struct loongson_pci *priv; + struct loongson_pci_data *data; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + cfg->priv = priv; + data->flags = FLAG_CFG1; + priv->data = data; + priv->cfg1_base = cfg->win - (cfg->busr.start << 16); + + return 0; +} + +const struct pci_ecam_ops loongson_pci_ecam_ops = { + .bus_shift = 16, + .init = loongson_pci_ecam_init, + .pci_ops = { + .map_bus = pci_loongson_map_bus, + .read = pci_generic_config_read, + .write = pci_generic_config_write, + } +}; + +#endif diff --git a/include/linux/pci-ecam.h b/include/linux/pci-ecam.h index adea5a4771cf..6b1301e2498e 100644 --- a/include/linux/pci-ecam.h +++ b/include/linux/pci-ecam.h @@ -87,6 +87,7 @@ extern const struct pci_ecam_ops xgene_v1_pcie_ecam_ops; /* APM X-Gene PCIe v1 * extern const struct pci_ecam_ops xgene_v2_pcie_ecam_ops; /* APM X-Gene PCIe v2.x */ extern const struct pci_ecam_ops al_pcie_ops; /* Amazon Annapurna Labs PCIe */ extern const struct pci_ecam_ops tegra194_pcie_ops; /* Tegra194 PCIe */ +extern const struct pci_ecam_ops loongson_pci_ecam_ops; /* Loongson PCIe */ #endif #if IS_ENABLED(CONFIG_PCI_HOST_COMMON) -- 2.27.0
