Re: [PATCH v3 1/5] dt-bindings: pci: Add ARTPEC-8 PCIe controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 13/06/2022 18:27, Wangseok Lee wrote:
> Add description to support Axis, ARTPEC-8 SoC.
> ARTPEC-8 is the SoC platform of Axis Communications
> and PCIe controller is designed based on Design-Ware PCIe controller.
> 
> Signed-off-by: Wangseok Lee <wangseok.lee@xxxxxxxxxxx>
> ---
> v2->v3 :
> - modify version history to fit the linux commit rule
> - remove 'Device Tree Bindings' on title
> - remove the interrupt-names, phy-names entries
> - remove '_clk' suffix
> - add the compatible entries on required
> - change node name to soc from artpec8 on examples
> 
> v1->v2 :
> -'make dt_binding_check' result improvement
> -Add the missing property list
> -Align the indentation of continued lines/entries
> ---
>  .../bindings/pci/axis,artpec8-pcie-ep.yaml         | 109 +++++++++++++++++++
>  .../devicetree/bindings/pci/axis,artpec8-pcie.yaml | 120 +++++++++++++++++++++
>  2 files changed, 229 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/axis,artpec8-pcie-ep.yaml
>  create mode 100644 Documentation/devicetree/bindings/pci/axis,artpec8-pcie.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pci/axis,artpec8-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/axis,artpec8-pcie-ep.yaml
> new file mode 100644
> index 0000000..d802bba
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/axis,artpec8-pcie-ep.yaml
> @@ -0,0 +1,109 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/axis,artpec8-pcie-ep.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ARTPEC-8 SoC PCIe Controller
> +
> +maintainers:
> +  - Jesper Nilsson <jesper.nilsson@xxxxxxxx>
> +
> +description: |+
> +  This PCIe end-point controller is based on the Synopsys DesignWare PCIe IP
> +  and thus inherits all the common properties defined in snps,dw-pcie-ep.yaml.
> +
> +allOf:
> +  - $ref: /schemas/pci/snps,dw-pcie-ep.yaml#
> +
> +properties:
> +  compatible:
> +    const: axis,artpec8-pcie-ep
> +
> +  reg:
> +    items:
> +      - description: Data Bus Interface (DBI) registers.
> +      - description: Data Bus Interface (DBI2) registers.
> +      - description: PCIe address space region.
> +
> +  reg-names:
> +    items:
> +      - const: dbi
> +      - const: dbi2
> +      - const: addr_space
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: PIPE clock, used by the controller to clock the PIPE
> +      - description: PCIe dbi clock, ungated version
> +      - description: PCIe master clock, ungated version
> +      - description: PCIe slave clock, ungated version
> +
> +  clock-names:
> +    items:
> +      - const: pipe
> +      - const: dbi
> +      - const: mstr
> +      - const: slv
> +
> +  phys:
> +    maxItems: 1
> +
> +  num-lanes:
> +    const: 2
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - interrupts
> +  - interrupt-names
> +  - clocks
> +  - clock-names
> +  - samsung,fsys-sysreg
> +  - samsung,syscon-phandle
> +  - samsung,syscon-bus-s-fsys
> +  - samsung,syscon-bus-p-fsys


We are making circles... This was before and I commented already it is
wrong. You cannot have some unknown/random properties in "required:"
without describing them in "properties:". Please list all your
properties in "properties:", except the ones coming from snps
bindings/schema.

> +  - phys
> +  - num-lanes
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +        pcie_ep: pcie-ep@17200000 {
> +            compatible = "axis,artpec8-pcie-ep";
> +            reg = <0x0 0x17200000 0x0 0x1000>,
> +                  <0x0 0x17201000 0x0 0x1000>,
> +                  <0x2 0x00000000 0x6 0x00000000>;
> +            reg-names = "dbi", "dbi2", "addr_space";
> +            #interrupt-cells = <1>;
> +            interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
> +            interrupt-names = "intr";
> +            clocks = <&clock_cmu_fsys 39>,
> +                     <&clock_cmu_fsys 38>,
> +                     <&clock_cmu_fsys 37>,
> +                     <&clock_cmu_fsys 36>;
> +            clock-names = "pipe", "dbi", "mstr", "slv";
> +            samsung,fsys-sysreg = <&syscon_fsys>;
> +            samsung,syscon-phandle = <&pmu_system_controller>;
> +            samsung,syscon-bus-s-fsys = <&syscon_bus_s_fsys>;
> +            samsung,syscon-bus-p-fsys = <&syscon_bus_p_fsys>;
> +            phys = <&pcie_phy>;
> +            phy-names = "pcie_phy";
> +            num-lanes = <2>;
> +            bus-range = <0x00 0xff>;
> +            num-ib-windows = <16>;
> +            num-ob-windows = <16>;
> +        };
> +    };
> +...
> diff --git a/Documentation/devicetree/bindings/pci/axis,artpec8-pcie.yaml b/Documentation/devicetree/bindings/pci/axis,artpec8-pcie.yaml
> new file mode 100644
> index 0000000..dbbe1fd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/axis,artpec8-pcie.yaml
> @@ -0,0 +1,120 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/axis,artpec8-pcie.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Artpec-8 SoC PCIe Controller
> +
> +maintainers:
> +  - Jesper Nilsson <jesper.nilsson@xxxxxxxx>
> +
> +description: |+
> +  This PCIe host controller is based on the Synopsys DesignWare PCIe IP
> +  and thus inherits all the common properties defined in snps,dw-pcie.yaml.
> +
> +allOf:
> +  - $ref: /schemas/pci/snps,dw-pcie.yaml#
> +
> +properties:
> +  compatible:
> +    const: axis,artpec8-pcie
> +
> +  reg:
> +    items:
> +      - description: Data Bus Interface (DBI) registers.
> +      - description: External Local Bus interface (ELBI) registers.
> +      - description: PCIe configuration space region.
> +
> +  reg-names:
> +    items:
> +      - const: dbi
> +      - const: elbi
> +      - const: config
> +
> +  ranges:
> +    maxItems: 2
> +
> +  num-lanes:
> +    const: 2
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: PIPE clock, used by the controller to clock the PIPE
> +      - description: PCIe dbi clock, ungated version
> +      - description: PCIe master clock,  ungated version
> +      - description: PCIe slave clock, ungated version
> +
> +  clock-names:
> +    items:
> +      - const: pipe
> +      - const: dbi
> +      - const: mstr
> +      - const: slv
> +
> +  phys:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - device_type
> +  - ranges
> +  - num-lanes
> +  - interrupts
> +  - interrupt-names
> +  - clocks
> +  - clock-names
> +  - samsung,fsys-sysreg
> +  - samsung,syscon-phandle
> +  - samsung,syscon-bus-s-fsys
> +  - samsung,syscon-bus-p-fsys

Same problem.

Best regards,
Krzysztof



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux