From: Richard Zhu <hongxing.zhu@xxxxxxx> Because i.MX PCIe doesn't support hot-plug feature. In the link down scenario, only start the PCIe link training in resume when the link is up before system suspend to avoid the long latency in the link training period. [bhelgaas: drop now-unused "ret"] Link: https://lore.kernel.org/r/1655189942-12678-8-git-send-email-hongxing.zhu@xxxxxxx Signed-off-by: Richard Zhu <hongxing.zhu@xxxxxxx> Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> --- drivers/pci/controller/dwc/pci-imx6.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index 7d3592540b8a..b6e5420d67b6 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -67,6 +67,7 @@ struct imx6_pcie { struct dw_pcie *pci; int reset_gpio; bool gpio_active_high; + bool link_is_up; struct clk *pcie_bus; struct clk *pcie_phy; struct clk *pcie_inbound_axi; @@ -900,6 +901,7 @@ static int imx6_pcie_start_link(struct dw_pcie *pci) dev_info(dev, "Link: Gen2 disabled\n"); } + imx6_pcie->link_is_up = true; tmp = dw_pcie_readw_dbi(pci, offset + PCI_EXP_LNKSTA); dev_info(dev, "Link up, Gen%i\n", tmp & PCI_EXP_LNKSTA_CLS); return 0; @@ -1025,7 +1027,6 @@ static int imx6_pcie_suspend_noirq(struct device *dev) static int imx6_pcie_resume_noirq(struct device *dev) { - int ret; struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev); struct pcie_port *pp = &imx6_pcie->pci->pp; @@ -1036,10 +1037,8 @@ static int imx6_pcie_resume_noirq(struct device *dev) imx6_pcie_init_phy(imx6_pcie); imx6_pcie_deassert_core_reset(imx6_pcie); dw_pcie_setup_rc(pp); - - ret = imx6_pcie_start_link(imx6_pcie->pci); - if (ret < 0) - dev_info(dev, "pcie link is down after resume.\n"); + if (imx6_pcie->link_is_up) + imx6_pcie_start_link(imx6_pcie->pci); return 0; } -- 2.25.1
