On Tue, Jun 14, 2022 at 06:01:28PM -0500, Bjorn Helgaas wrote: > [+cc NVMe folks] > > On Tue, Jun 14, 2022 at 07:49:27PM -0300, Guilherme G. Piccoli wrote: > > On 14/06/2022 12:47, Hans de Goede wrote: > > > [...] > > > > > > Have you looked at the log of the failed boot in the Steam Deck kernel > > > bugzilla? Everything there seems to work just fine and then the system > > > just hangs. I think that maybe it cannot find its root disk, so maybe > > > an NVME issue ? > > > > *Exactly* that - NVMe device is the root disk, it cannot boot since the > > device doesn't work, hence no rootfs =) > > Beginning of thread: https://lore.kernel.org/r/20220612144325.85366-1-hdegoede@xxxxxxxxxx > > Steam Deck broke because we erroneously trimmed out the PCI host > bridge window where BIOS had placed most devices, successfully > reassigned all the PCI bridge windows and BARs, but some devices, > apparently including NVMe, didn't work at the new addresses. > > Do you NVMe folks know of gotchas in this area? I want to know > because we'd like to be able to move devices around someday to make > room for hot-added devices. > > This reassignment happened before drivers claimed the devices, so from > a PCI point of view, I don't know why the NVMe device wouldn't work at > the new address. The probe status quickly returns ENODEV. Based on the output (we don't log much, so this is just an educated guesss), I think that means the driver read all F's from the status register, which indicates we can't read it when using the reassigned memory window. Why changing memory windows may not work tends to be platform or device specific. Considering the renumbered windows didn't cause a problem for other devices, it sounds like this nvme device may be broken.
