On Wed, Jun 08, 2022 at 05:34:21PM +0800, Huacai Chen wrote:
> On Fri, Jun 3, 2022 at 12:29 AM Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote:
> > On Thu, Jun 02, 2022 at 08:48:20PM +0800, Huacai Chen wrote:
> > > On Wed, Jun 1, 2022 at 7:35 AM Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote:
> > > > On Sat, Apr 30, 2022 at 04:48:45PM +0800, Huacai Chen wrote:
> > > > > Commit cc27b735ad3a75574a ("PCI/portdrv: Turn off PCIe services
> > > > > during shutdown") causes poweroff/reboot failure on systems with
> > > > > LS7A chipset. We found that if we remove "pci_command &=
> > > > > ~PCI_COMMAND_MASTER;" in do_pci_disable_device(), it can work
> > > > > well. The hardware engineer says that the root cause is that CPU
> > > > > is still accessing PCIe devices while poweroff/reboot, and if we
> > > > > disable the Bus Master Bit at this time, the PCIe controller
> > > > > doesn't forward requests to downstream devices, and also doesn't
> > > > > send TIMEOUT to CPU, which causes CPU wait forever (hardware
> > > > > deadlock). This behavior is a PCIe protocol violation (Bus
> > > > > Master should not be involved in CPU MMIO transactions), and it
> > > > > will be fixed in new revisions of hardware (add timeout
> > > > > mechanism for CPU read request, whether or not Bus Master bit is
> > > > > cleared).
> > > >
> > > > LS7A might have bugs in that clearing Bus Master Enable prevents the
> > > > root port from forwarding Memory or I/O requests in the downstream
> > > > direction.
> > > >
> > > > But this feels like a bit of a band-aid because we don't know exactly
> > > > what those requests are. If we're removing the Root Port, I assume we
> > > > think we no longer need any devices *below* the Root Port.
> > > >
> > > > If that's not the case, e.g., if we still need to produce console
> > > > output or save state to a device, we probably should not be removing
> > > > the Root Port at all.
> > >
> > > Do you mean it is better to skip the whole pcie_port_device_remove()
> > > instead of just removing the "clear bus master" operation for the
> > > buggy hardware?
> >
> > No, that's not what I want at all. That's just another band-aid to
> > avoid a problem without understanding what the problem is.
> >
> > My point is that apparently we remove a Root Port (which means we've
> > already removed any devices under it), and then we try to use a device
> > below the Root Port. That seems broken. I want to understand why we
> > try to use a device after we've removed it.
>
> I agree, and I think "why we try to use a device after remove it" is
> because the userspace programs don't know whether a device is
> "usable", so they just use it, at any time. Then it seems it is the
> responsibility of the device drivers to avoid the problem.
How is userspace able to use a device after the device is removed?
E.g., if userspace does a read/write to a device that has been
removed, the syscall should return error, not touch the missing
device. If userspace mmaps a device, an access after the device has
been removed should fault, not do MMIO to the missing device.
> Take radeon/amdgpu driver as an example, the .shutdown() of the
> callback can call suspend() to fix.
>
> But..., another problem is: There are many drivers "broken", not just
> radeon/amdgpu drivers (at least, the ahci driver is also "broken").
> Implementing the driver's .shutdown() correctly is nearly impossible
> for us, because we don't know the hardware details of so many devices.
> On the other hand, those drivers "just works" on most platforms, so
> the driver authors don't think they are "broken".
It sounds like you have analyzed this and have more details about
exactly how this happens. Can you please share those details? There
are a lot of steps in the middle that I don't understand yet.
Without those details, "userspace programs don't know whether a device
is 'usable', so they just use it, at any time" is kind of hand-wavey
and not very convincing.
> So, very sadly, we can only use a band-aid now. :(
>
> > If the scenario ends up being legitimate and unavoidable, fine -- we
> > can figure out a quirk to work around the fact the LS7A doesn't allow
> > that access after we clear Bus Master Enable. But right now the
> > scenario smells like a latent bug, and leaving bus mastering enabled
> > just avoids it without fixing it.
> >
> > Bjorn
