Re: [PATCH v2 1/5] dt-bindings: pci: Add ARTPEC-8 PCIe controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 03/06/2022 04:23, Wangseok Lee wrote:
> Add description to support Axis, ARTPEC-8 SoC.
> ARTPEC-8 is the SoC platform of Axis Communications
> and PCIe controller is designed based on Design-Ware PCIe controller.
> 
> changes since v1 :

Changelog goes after --- .

> -'make dt_binding_check' result improvement
> -Add the missing property list
> -Align the indentation of continued lines/entries
> 
> Signed-off-by: Wangseok Lee <wangseok.lee@xxxxxxxxxxx>
> ---
>  .../bindings/pci/axis,artpec8-pcie-ep.yaml         | 108 ++++++++++++++++++
>  .../devicetree/bindings/pci/axis,artpec8-pcie.yaml | 123 +++++++++++++++++++++
>  2 files changed, 231 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/axis,artpec8-pcie-ep.yaml
>  create mode 100644 Documentation/devicetree/bindings/pci/axis,artpec8-pcie.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pci/axis,artpec8-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/axis,artpec8-pcie-ep.yaml
> new file mode 100644
> index 0000000..3512e38
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/axis,artpec8-pcie-ep.yaml
> @@ -0,0 +1,108 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/axis,artpec8-pcie-ep.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ARTPEC-8 SoC PCIe Controller Device Tree Bindings

s/Device Tree Bindings//

> +
> +maintainers:
> +  - Jesper Nilsson <jesper.nilsson@xxxxxxxx>
> +
> +description: |+
> +  This PCIe end-point controller is based on the Synopsys DesignWare PCIe IP
> +  and thus inherits all the common properties defined in snps,dw-pcie-ep.yaml.
> +
> +allOf:
> +  - $ref: /schemas/pci/snps,dw-pcie-ep.yaml#
> +
> +properties:
> +  compatible:
> +    const: axis,artpec8-pcie-ep
> +
> +  reg:
> +    items:
> +      - description: Data Bus Interface (DBI) registers.
> +      - description: Data Bus Interface (DBI2) registers.
> +      - description: PCIe address space region.
> +
> +  reg-names:
> +    items:
> +      - const: dbi
> +      - const: dbi2
> +      - const: addr_space
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  interrupts-names:
> +    items:
> +      - const: intr

Remove the interrupts-names entirely, no need for single item with
generic name.


> +
> +  clocks:
> +    items:
> +      - description: PIPE clock, used by the controller to clock the PIPE
> +      - description: PCIe dbi clock, ungated version
> +      - description: PCIe master clock, ungated version
> +      - description: PCIe slave clock, ungated version
> +
> +  clock-names:
> +    items:
> +      - const: pipe_clk
> +      - const: dbi_clk
> +      - const: mstr_clk
> +      - const: slv_clk

Remove "_clk" suffix from all entries.

> +
> +  phys:
> +    maxItems: 1
> +
> +  phy-names:
> +    items:
> +      - const: pcie_phy

Remove the phy-names entirely, no need for single item with generic name.

> +
> +  num-lanes:
> +    const: 2
> +
> +required:

My comment was not applied here, so please fix it.


> +  - reg
> +  - reg-names
> +  - interrupts
> +  - interrupt-names
> +  - clocks
> +  - clock-names
> +  - phys
> +  - num-lanes
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    artpec8 {

Generic nodes please. Did you see "artpec8" or something like this in
any DTS?

> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +        pcie_ep: pcie-ep@17200000 {
> +            compatible = "axis,artpec8-pcie-ep";
> +            reg = <0x0 0x17200000 0x0 0x1000>,
> +                  <0x0 0x17201000 0x0 0x1000>,
> +                  <0x2 0x00000000 0x6 0x00000000>;
> +            reg-names = "dbi", "dbi2", "addr_space";
> +            #interrupt-cells = <1>;
> +            interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
> +            interrupt-names = "intr";
> +            clocks = <&clock_cmu_fsys 39>,
> +                     <&clock_cmu_fsys 38>,
> +                     <&clock_cmu_fsys 37>,
> +                     <&clock_cmu_fsys 36>;
> +            clock-names = "pipe_clk", "dbi_clk", "mstr_clk", "slv_clk";
> +            phys = <&pcie_phy>;
> +            phy-names = "pcie_phy";
> +            num-lanes = <2>;
> +            bus-range = <0x00 0xff>;
> +            num-ib-windows = <16>;
> +            num-ob-windows = <16>;
> +        };
> +    };


> +...
> diff --git a/Documentation/devicetree/bindings/pci/axis,artpec8-pcie.yaml b/Documentation/devicetree/bindings/pci/axis,artpec8-pcie.yaml
> new file mode 100644
> index 0000000..945a061
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/axis,artpec8-pcie.yaml
> @@ -0,0 +1,123 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/axis,artpec8-pcie.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Artpec-8 SoC PCIe Controller Device Tree Bindings

Ditto

> +
> +maintainers:
> +  - Jesper Nilsson <jesper.nilsson@xxxxxxxx>
> +
> +description: |+
> +  This PCIe host controller is based on the Synopsys DesignWare PCIe IP
> +  and thus inherits all the common properties defined in snps,dw-pcie.yaml.
> +
> +allOf:
> +  - $ref: /schemas/pci/snps,dw-pcie.yaml#
> +
> +properties:
> +  compatible:
> +    const: axis,artpec8-pcie
> +
> +  reg:
> +    items:
> +      - description: Data Bus Interface (DBI) registers.
> +      - description: External Local Bus interface (ELBI) registers.
> +      - description: PCIe configuration space region.
> +
> +  reg-names:
> +    items:
> +      - const: dbi
> +      - const: elbi
> +      - const: config
> +
> +  device_type:
> +    items:

It's not a list, but just a string. No need for items.

> +      - const: pci
> +
> +  ranges:
> +    maxItems: 2
> +
> +  num-lanes:
> +    const: 2
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  interrupts-names:
> +    items:
> +      - const: intr

Remove entire property.

> +
> +  clocks:
> +    items:
> +      - description: PIPE clock, used by the controller to clock the PIPE
> +      - description: PCIe dbi clock, ungated version
> +      - description: PCIe master clock,  ungated version
> +      - description: PCIe slave clock, ungated version
> +
> +  clock-names:
> +    items:
> +      - const: pipe_clk
> +      - const: dbi_clk
> +      - const: mstr_clk
> +      - const: slv_clk

Remove suffix.

> +
> +  phys:
> +    maxItems: 1
> +
> +  phy-names:
> +    items:
> +      - const: pcie_phy

Remove entire property.

> +
> +required:

Previous comment not applied.

> +  - reg
> +  - reg-names
> +  - device_type
> +  - ranges
> +  - num-lanes
> +  - interrupts
> +  - interrupt-names
> +  - clocks
> +  - clock-names
> +  - phys
> +  - phy-names
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    artpec8 {

Same as previous patch.

> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +        pcie: pcie@17200000 {
> +            compatible = "axis,artpec8-pcie";
> +            reg = <0x0 0x17200000 0x0 0x1000>,
> +                  <0x0 0x16ca0000 0x0 0x2000>,
> +                  <0x7 0x0001e000 0x0 0x2000>;
> +            reg-names = "dbi", "elbi", "config";
> +            #address-cells = <3>;
> +            #size-cells = <2>;
> +            device_type = "pci";
> +            ranges = </* non-prefetchable memory */
> +                      0x83000000 0x0 0x0000000 0x2 0x00000000 0x5 0x00000000
> +                      /* downstream I/O */
> +                      0x81000000 0x0 0x0000000 0x7 0x00000000 0x0 0x00010000>;
> +            num-lanes = <2>;
> +            bus-range = <0x00 0xff>;
> +            interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
> +            interrupt-names = "intr";
> +            #interrupt-cells = <1>;
> +            clocks = <&cmu_fsys 39>,
> +                     <&cmu_fsys 38>,
> +                     <&cmu_fsys 37>,
> +                     <&cmu_fsys 36>;
> +            clock-names = "pipe_clk", "dbi_clk", "mstr_clk", "slv_clk";
> +            phys = <&pcie_phy>;
> +            phy-names = "pcie_phy";
> +        };
> +    };
> +...


Best regards,
Krzysztof



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux