Re: [PATCH V9 6/9] cxl/port: Read CDAT table

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jun 01, 2022 at 05:31:13PM +0100, Jonathan Cameron wrote:
> On Wed, 1 Jun 2022 16:35:40 +0100
> Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> wrote:
> 
> > On Tue, 31 May 2022 08:26:29 -0700
> > ira.weiny@xxxxxxxxx wrote:
> > 
> > > From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
> > > 
> > > The OS will need CDAT data from CXL devices to properly set up
> > > interleave sets.  Currently this is supported through a DOE mailbox
> > > which supports CDAT.
> > > 
> > > Cache the CDAT data for later parsing.  Provide a sysfs binary attribute
> > > to allow dumping of the CDAT.
> > > 
> > > Binary dumping is modeled on /sys/firmware/ACPI/tables/
> > > 
> > > The ability to dump this table will be very useful for emulation of real
> > > devices once they become available as QEMU CXL type 3 device emulation will
> > > be able to load this file in.
> > > 
> > > This does not support table updates at runtime. It will always provide
> > > whatever was there when first cached. Handling of table updates can be
> > > implemented later.
> > > 
> > > Finally create a complete list of DOE defines within cdat.h for code
> > > wishing to decode the CDAT table.
> > > 
> > > Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
> > > Co-developed-by: Ira Weiny <ira.weiny@xxxxxxxxx>
> > > Signed-off-by: Ira Weiny <ira.weiny@xxxxxxxxx>
> > >   
> > 
> > Fun question of ownership inline...
> 
> And a follow up due to triggering a bug that predated this series...
> 
> I'd send a fix, but I'm off on a long weekend shortly :)

NP I discussed with Dan and the use of dev_groups should allow me to move this
to port probe where it belongs.  I put it here for the sysfs stuff.

> 
> > 
> > ...
> > 
> > > +void read_cdat_data(struct cxl_port *port)
> > > +{
> > > +	struct device *dev = &port->dev;
> > > +	size_t cdat_length;
> > > +	int ret;
> > > +
> > > +	if (cxl_cdat_get_length(port, &cdat_length))
> > > +		return;
> > > +
> > > +	port->cdat.table = devm_kzalloc(dev, cdat_length, GFP_KERNEL);  
> > 
> > boom. See below for why :)
> > 
> > > +	if (!port->cdat.table) {
> > > +		ret = -ENOMEM;
> > > +		goto error;
> > > +	}
> > > +
> > > +	port->cdat.length = cdat_length;
> > > +	ret = cxl_cdat_read_table(port, &port->cdat);
> > > +	if (ret) {
> > > +		devm_kfree(dev, port->cdat.table);
> > > +		port->cdat.table = NULL;
> > > +		port->cdat.length = 0;
> > > +		ret = -EIO;
> > > +		goto error;
> > > +	}
> > > +
> > > +	return;
> > > +error:
> > > +	dev_err(dev, "CDAT data read error (%d)\n", ret);
> > > +}
> > > +EXPORT_SYMBOL_NS_GPL(read_cdat_data, CXL);
> > > diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c
> > > index 2e2bd65c1024..aa4229ddc1bc 100644
> > > --- a/drivers/cxl/core/port.c
> > > +++ b/drivers/cxl/core/port.c
> > > @@ -320,7 +320,48 @@ static void cxl_port_release(struct device *dev)
> > >  	kfree(port);
> > >  }
> > >  
> > > +static ssize_t cdat_read(struct file *filp, struct kobject *kobj,
> > > +			 struct bin_attribute *bin_attr, char *buf,
> > > +			 loff_t offset, size_t count)
> > > +{
> > > +	struct device *dev = kobj_to_dev(kobj);
> > > +	struct cxl_port *port = to_cxl_port(dev);
> > > +
> > > +	if (!port->cdat.table)
> > > +		return 0;
> > > +
> > > +	return memory_read_from_buffer(buf, count, &offset,
> > > +				       port->cdat.table,
> > > +				       port->cdat.length);
> > > +}
> > > +
> > > +static BIN_ATTR_RO(cdat, 0);
> > > +
> > > +static umode_t cxl_port_bin_attr_is_visible(struct kobject *kobj,
> > > +					      struct bin_attribute *attr, int i)
> > > +{
> > > +	struct device *dev = kobj_to_dev(kobj);
> > > +	struct cxl_port *port = to_cxl_port(dev);
> > > +
> > > +	if ((attr == &bin_attr_cdat) && port->cdat.table)
> > > +		return 0400;
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static struct bin_attribute *cxl_cdat_bin_attributes[] = {
> > > +	&bin_attr_cdat,
> > > +	NULL,
> > > +};
> > > +
> > > +static struct attribute_group cxl_cdat_attribute_group = {
> > > +	.name = "CDAT",
> > > +	.bin_attrs = cxl_cdat_bin_attributes,
> > > +	.is_bin_visible = cxl_port_bin_attr_is_visible,
> > > +};
> > > +
> > >  static const struct attribute_group *cxl_port_attribute_groups[] = {
> > > +	&cxl_cdat_attribute_group,o
> > >  	&cxl_base_attribute_group,
> > >  	NULL,
> > >  };
> > > @@ -462,6 +503,8 @@ struct cxl_port *devm_cxl_add_port(struct device *host, struct device *uport,
> > >  		return port;
> > >  
> > >  	cxl_find_cdat_mb(port);
> > > +	/* Cache the data early to ensure is_visible() works */
> > > +	read_cdat_data(port);  
> > 
> > This uses port as the 'device' for devm_ calls.
> > Unfortunately if the port driver isn't loaded, it still "successfully" runs.
> > Then if the port driver is probed, you get both a bunch of errors due to
> > devm_ allocations on a device before the driver is loaded.
> > 
> > For extra fun it tries to probe the ports multiple times without freeing
> > the index which is 'interesting'. We had this happen a while ago (unrelated
> > to DOE) but this may be unrelated (or maybe related to the region stuff
> > I'm carrying on my test tree)
> 
> So the extra devices are a result of the obvious initial path of
> cxl_mem_probe() from module probe and down failing, then bus_rescan_devices
> coming along from the pmem driver having another go... 
> 
> So next question is why don't the first set of endpointX devices get cleaned up
> if the create_endpoint() in cxl/mem.c fails.
> 
> I think this is because the cxl_endpoint_autoremove() call hasn't yet happened
> when we detect the failure to bind a driver and error out of cxl_mem_probe().
> 
> So, fix is probably to do the cxl_endpoint_autoremove() unconditionally
> by moving it before the check on driver binding.
> 
> https://elixir.bootlin.com/linux/latest/source/drivers/cxl/mem.c#L67
> 
> Move it up a few lines.
> 

I think I can make it work by moving into the port probe.

Ira

> 
> 
> > 
> > As to the question of what the correct fix is...
> > Maybe move them into the port driver probe but then is_visible
> > won't work.  Or pass a pointer to the struct device *host down
> > into read_cdat_data and __read_cdat_data calls to handle the
> > allocation. (I tried this and it seems superficially fine).
> > 
> > Jonathan
> > 
> > 
> > 
> > >  
> > >  	dev = &port->dev;
> > >  	if (is_cxl_memdev(uport))
> > > diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
> > > index 0a86be589ffc..531b77d296c7 100644
> > > --- a/drivers/cxl/cxl.h
> > > +++ b/drivers/cxl/cxl.h
> > > @@ -8,6 +8,7 @@
> > >  #include <linux/bitfield.h>
> > >  #include <linux/bitops.h>
> > >  #include <linux/io.h>
> > > +#include "cdat.h"
> > >  
> > >  /**
> > >   * DOC: cxl objects
> > > @@ -268,6 +269,7 @@ struct cxl_nvdimm {
> > >   * @dead: last ep has been removed, force port re-creation
> > >   * @depth: How deep this port is relative to the root. depth 0 is the root.
> > >   * @cdat_mb: Mailbox which supports the CDAT protocol
> > > + * @cdat: Cached CDAT data
> > >   */
> > >  struct cxl_port {
> > >  	struct device dev;
> > > @@ -280,6 +282,7 @@ struct cxl_port {
> > >  	bool dead;
> > >  	unsigned int depth;
> > >  	struct pci_doe_mb *cdat_mb;
> > > +	struct cxl_cdat cdat;
> > >  };
> > >  
> > >  /**
> > > diff --git a/drivers/cxl/cxlpci.h b/drivers/cxl/cxlpci.h
> > > index 366b21bd1a01..35f0d4892eaa 100644
> > > --- a/drivers/cxl/cxlpci.h
> > > +++ b/drivers/cxl/cxlpci.h
> > > @@ -75,4 +75,5 @@ int devm_cxl_port_enumerate_dports(struct cxl_port *port);
> > >  struct cxl_dev_state;
> > >  int cxl_hdm_decode_init(struct cxl_dev_state *cxlds, struct cxl_hdm *cxlhdm);
> > >  void cxl_find_cdat_mb(struct cxl_port *port);
> > > +void read_cdat_data(struct cxl_port *port);
> > >  #endif /* __CXL_PCI_H__ */  
> > 
> 



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux