On Thu, May 19, 2022 at 01:52:38PM +0300, Serge Semin wrote:
[...]
> > > > > > > diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> > > > > > > index 747e252c09e6..33718ed6c511 100644
> > > > > > > --- a/drivers/pci/controller/dwc/pcie-designware.c
> > > > > > > +++ b/drivers/pci/controller/dwc/pcie-designware.c
> > > > > > > @@ -397,8 +397,61 @@ static inline void dw_pcie_writel_atu_ib(struct dw_pcie *pci, u32 index, u32 reg
> > > > > > > dw_pcie_writel_atu(pci, PCIE_ATU_REGION_DIR_IB, index, reg, val);
> > > > > > > }
> > > > > > >
> > > > > > > -int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, u8 func_no, int index,
> > > > > > > - int type, u64 cpu_addr, u8 bar)
> > > > > > > +int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int type,
> > > > > > > + u64 cpu_addr, u64 pci_addr, u64 size)
> > > > > > > +{
> > > > > > > + u64 limit_addr = pci_addr + size - 1;
> > > > > > > + u32 retries, val;
> > > > > > > +
> > > > > > > + if ((limit_addr & ~pci->region_limit) != (pci_addr & ~pci->region_limit) ||
> > > > > > > + !IS_ALIGNED(cpu_addr, pci->region_align) ||
> > > > > > > + !IS_ALIGNED(pci_addr, pci->region_align) ||
> > > > > > > + !IS_ALIGNED(size, pci->region_align) ||
> > > > > >
> > > > >
> > > > > > Why do you want the size to be aligned? What if I want to transfer a small size
> > > > > > buffer?
> > > > > >
> > > > > > Same question applies to outbound programming as well.
> > > > >
> > > > > You can't program a region with the unaligned size by the DW PCIe CSRs
> > > > > design. The limit address lower bits are read-only and fixed with
> > > > > one's in accordance with the IP-core synthesize parameter
> > > > > CX_ATU_MIN_REGION_SIZE. So the mapping is always performed in the
> > > > > CX_ATU_MIN_REGION_SIZE chunks.
> > > > >
> > > > > IATU_LIMIT_ADDR_OFF_{IN,OUT}BOUND.LIMIT_ADDR_HW =
> > > > > {(CX_ATU_MIN_REGION_SIZE == 65536) ? "0xffff" :
> > > > > (CX_ATU_MIN_REGION_SIZE == 32768) ? "0x7fff" :
> > > > > (CX_ATU_MIN_REGION_SIZE == 16384) ? "0x3fff" :
> > > > > (CX_ATU_MIN_REGION_SIZE == 8192) ? "0x1fff" :
> > > > > (CX_ATU_MIN_REGION_SIZE == 4096) ? "0xfff" : "0xffff"}
> > > > >
> > > >
> > >
> > > > Right. Even though the minimum size that could be mapped is 4k, I could still
> > > > use that 4k size for mapping small buffers also. So you should not be erroring
> > > > out here if the size is not aligned.
> > >
> > > Why would you need to do that? Even if you do and the operation
> > > doesn't return an error (or at least splash the syslog with a
> > > warning), the hardware would expand the mapping up to the aligned size
> > > anyway. Such implicit behavior would have given your software an
> > > impression that the mapping was performed in the way you asked with
> > > the size you specified so the upper part of the unaligned range is
> > > free to be used for something else. If the range is accessed, instead
> > > of a bus error or silent IO termination it may cause unexpected result
> > > of creating random PCIe bus traffic. So I'd rather have the
> > > code/platform setup fixed right from the start instead of waiting for
> > > the hard to find bug cause.
> > >
> >
>
> > The application I'm working on is MHI bus. As per the design, it needs to copy
> > 16byte data to ring buffers in the host memory. If I use iATU, then I
> > cannot copy those small data with the size alignment.
>
> First of all I don't see any driver using the DW PCIe iATU mapping
> functions directly. They are only utilized in the framework of the
> "ranges" and "dma-ranges" DT properties.
Not true. The PCI_EPF_TEST and PCI_EPF_NTB applications use iATU mpping function
through EPC ops.
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/pci/endpoint/functions/pci-epf-test.c#n250
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/pci/endpoint/pci-epc-core.c#n476
Now that I've referred, we need to check if these drivers still work on top of
your patches. These are not supported on my platform, so perhaps Frank can
test?
> If the application you are
> referring to your private code, then it can't be a justification.
I should have mentioned it, but my application is not private. It is partly
available in linux-next:
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/drivers/bus/mhi/ep/ring.c#n47
https://git.linaro.org/landing-teams/working/qualcomm/kernel.git/tree/drivers/pci/endpoint/functions/pci-epf-mhi.c?h=tracking-qcomlt-sdx55-drivers#n121
> Secondly if your application uses them then what about just extending
> the mapping range size while still access the lowest 15 bytes only? In
> that case you would create a more comprehensive software which would
> be aware of the hardware constraints.
>
Hmm... I'm already doing a similar hack for getting the aligned address due to
iATU limitation, but I think doing the same for size should also work.
Thinking again, I agree with the alignment check. Thanks for the explanations.
But let's make sure the existing EPF drivers still work.
Thanks,
Mani
> >
> > > > I know that it is a waste of memory but that doesn't mean that it won't work.
> > >
> > > The correct statement in this case would be "it won't work in a way
> > > you expected, but with the implicit side effect applied to the memory
> > > above the requested one."
> > >
> >
>
> > Agree but that would only happen when the application does out of bound
> > access and in that case the issue is with the application.
>
> Not only in that case, but anyway how would such application be aware
> of the out of bounds access? Returning an error in case if the
> requested mapping can't be performed with the specified parameters is
> a possible solution. So the application would be aware of the hardware
> constraints and be sure it perceives them right. Otherwise the
> consequences of the out of bounds access would be very unexpected
> since the mapping is performed only for the small buffer.
>
> -Sergey
>
> >
> > Thanks,
> > Mani
> >
> > > -Sergey
> > >
> > > >
> > > > Thanks,
> > > > Mani
> > > >
> > > > > -Sergey
> > > > >
> > > > > >
> > > > > > Thanks,
> > > > > > Mani
> > > > > >
> > > > > > --
> > > > > > மணிவண்ணன் சதாசிவம்
> > > >
> > > > --
> > > > மணிவண்ணன் சதாசிவம்
--
மணிவண்ணன் சதாசிவம்
