Re: [PATCH v10 06/10] PCI: dwc: Handle MSIs routed to multiple GIC interrupts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, May 13, 2022 at 08:26:18PM +0300, Dmitry Baryshkov wrote:
> On some of Qualcomm platforms each group of 32 MSI vectors is routed to the
> separate GIC interrupt. Implement support for such configurations by
> parsing "msi0" ... "msiN" interrupts and attaching them to the chained
> handler.
> 
> Note, that if DT doesn't list an array of MSI interrupts and uses single
> "msi" IRQ, the driver will limit the amount of supported MSI vectors
> accordingly (to 32).
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
>  .../pci/controller/dwc/pcie-designware-host.c | 38 ++++++++++++++++++-
>  drivers/pci/controller/dwc/pcie-designware.h  |  1 +
>  2 files changed, 38 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
> index 70f0435907c1..320a968dd366 100644
> --- a/drivers/pci/controller/dwc/pcie-designware-host.c
> +++ b/drivers/pci/controller/dwc/pcie-designware-host.c
> @@ -288,6 +288,11 @@ static void dw_pcie_msi_init(struct pcie_port *pp)
>  	dw_pcie_writel_dbi(pci, PCIE_MSI_ADDR_HI, upper_32_bits(msi_target));
>  }
>  
> +static const char * const split_msi_names[] = {
> +	"msi0", "msi1", "msi2", "msi3",
> +	"msi4", "msi5", "msi6", "msi7",
> +};
> +
>  static int dw_pcie_msi_host_init(struct pcie_port *pp)
>  {
>  	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> @@ -300,17 +305,48 @@ static int dw_pcie_msi_host_init(struct pcie_port *pp)
>  	for (ctrl = 0; ctrl < num_ctrls; ctrl++)
>  		pp->irq_mask[ctrl] = ~0;
>  
> +	if (pp->has_split_msi_irq) {

You don't need to add this configuration parameter as it can be inferred
from the devicetree (e.g. if "msi0" is specified).

> +		/*
> +		 * Parse as many IRQs as described in the DTS. If there are
> +		 * none, fallback to the single "msi" IRQ.
> +		 */
> +		for (ctrl = 0; ctrl < num_ctrls; ctrl++) {
> +			int irq;
> +
> +			if (pp->msi_irq[ctrl])
> +				continue;
> +
> +			irq = platform_get_irq_byname(pdev, split_msi_names[ctrl]);

You need to use platform_get_irq_byname_optional() here or an error will
still printed if the number of "msi" interrupts is less than 8.

> +			if (irq == -ENXIO) {
> +				num_ctrls = ctrl;
> +				break;
> +			} else if (irq < 0) {
> +				return dev_err_probe(dev, irq,
> +						     "Failed to parse MSI IRQ '%s'\n",
> +						     split_msi_names[ctrl]);
> +			}
> +
> +			pp->msi_irq[ctrl] = irq;
> +		}
> +
> +		if (num_ctrls == 0)
> +			num_ctrls = 1;
> +	}
> +
>  	if (!pp->msi_irq[0]) {
>  		int irq = platform_get_irq_byname_optional(pdev, "msi");
>  
>  		if (irq < 0) {
>  			irq = platform_get_irq(pdev, 0);
>  			if (irq < 0)
> -				return irq;
> +				return dev_err_probe(dev, irq, "Failed to parse MSI irq\n");
>  		}
>  		pp->msi_irq[0] = irq;
>  	}
>  
> +	pp->num_vectors = min_t(u32, pp->num_vectors, num_ctrls * MAX_MSI_IRQS_PER_CTRL);
> +	dev_dbg(dev, "Using %d MSI vectors\n", pp->num_vectors);

Can you rework the handling of num_vectors == 0 (in dw_pcie_host_init())
so that the number is always inferred from the number of "msi"
interrupts without having to pass in num_vectors == MAX_MSI_IRQS?

That is

	num_vectors == 0 && "msi" => num_vectors = MSI_DEF_NUM_VECTORS (32)
	num_vectors == 0 && "msi0".."msin" => num_vectors = n * MAX_MSI_IRQS_PER_CTRL (n * 32)

> +
>  	pp->msi_irq_chip = &dw_pci_msi_bottom_irq_chip;
>  
>  	ret = dw_pcie_allocate_domains(pp);
> diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> index 9c1a38b0a6b3..3aa840a5b19c 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.h
> +++ b/drivers/pci/controller/dwc/pcie-designware.h
> @@ -179,6 +179,7 @@ struct dw_pcie_host_ops {
>  
>  struct pcie_port {
>  	bool			has_msi_ctrl:1;
> +	bool			has_split_msi_irq:1;
>  	u64			cfg0_base;
>  	void __iomem		*va_cfg0_base;
>  	u32			cfg0_size;

Johan



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux