From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx> This series adds Rockchip PCIe V3 support found on rk3568 SOC. It is based on "Enable rk356x PCIe controller" series of Peter Geis v9: https://patchwork.kernel.org/project/linux-rockchip/list/?series=636944 Compared to PCIeV2 which uses the Naneng combphy, PCIe v3 uses a dedicated PCI-phy. New in this version is that lane-map is no separate patch and moved from PCIe- to phy-driver. Peter has tested m2-slot too and so the bifurcation. The Phy-Patch is now changed to original author, but our changes are squashed in. Frank Wunderlich (4): dt-bindings: phy: rockchip: add PCIe v3 phy dt-bindings: soc: grf: add pcie30-{phy,pipe}-grf arm64: dts: rockchip: rk3568: Add PCIe v3 nodes arm64: dts: rockchip: Add PCIe v3 nodes to BPI-R2-Pro Shawn Lin (1): phy: rockchip: Support PCIe v3 .../bindings/phy/rockchip,pcie3-phy.yaml | 82 +++++ .../devicetree/bindings/soc/rockchip/grf.yaml | 3 + .../boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 90 +++++ arch/arm64/boot/dts/rockchip/rk3568.dtsi | 122 +++++++ drivers/phy/rockchip/Kconfig | 9 + drivers/phy/rockchip/Makefile | 1 + .../phy/rockchip/phy-rockchip-snps-pcie3.c | 317 ++++++++++++++++++ include/linux/phy/pcie.h | 12 + 8 files changed, 636 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml create mode 100644 drivers/phy/rockchip/phy-rockchip-snps-pcie3.c create mode 100644 include/linux/phy/pcie.h -- 2.25.1
