I have replied with my Tested-by to the patch at [2], which has landed
in the linux-next as the commit 20f1bfb8dd62 ("PCI: qcom:
Add support for handling MSIs from 8 endpoints"). However lately I
noticed that during the tests I still had 'pcie_pme=nomsi', so the
device was not forced to use higher MSI vectors.
After removing this option I noticed that hight MSI vectors are not
delivered on tested platforms. After additional research I stumbled upon
a patch in msm-4.14 ([1]), which describes that each group of MSI
vectors is mapped to the separate interrupt. Implement corresponding
mapping.
The first patch in the series is a revert of [2] (landed in pci-next).
Either both patches should be applied or both should be dropped.
Patchseries dependecies: [3] (for the schema change).
Changes since v8:
- Fix typos noted by Bjorn Helgaas
- Add missing links to the patch 1 (revert)
- Fix sm8250 interrupt-names (Johan)
- Specify num_vectors in qcom configuration data (Johan)
- Rework parsing of MSI IRQs (Johan)
Changes since v7:
- Move code back to the dwc core driver (as required by Rob),
- Change dt schema to require either a single "msi" interrupt or an
array of "msi0", "msi1", ... "msi7" IRQs. Disallow specifying a
part of the array (the DT should specify the exact amount of MSI IRQs
allowing fallback to a single "msi" IRQ),
- Fix in the DWC init code for the dma_mapping_error() return value.
Changes since v6:
- Fix indentation of the arguments as requested by Stanimir
Changes since v5:
- Fixed commit subject and in-comment code according to Bjorn's
suggestion,
- Changed variable idx to i to follow dw_handle_msi_irq() style.
Changes since v4:
- Fix the minItems/maxItems properties in the YAML schema.
Changes since v3:
- Reimplement MSI handling scheme in the Qualcomm host controller
driver.
Changes since v2:
- Fix and rephrase commit message for patch 2.
Changes since v1:
- Split a huge patch into three patches as suggested by Bjorn Helgaas
- snps,dw-pcie removal is now part of [3]
[1] https://git.codelinaro.org/clo/la/kernel/msm-4.14/-/commit/671a3d5f129f4bfe477152292ada2194c8440d22
[2] https://lore.kernel.org/linux-arm-msm/20211214101319.25258-1-manivannan.sadhasivam@xxxxxxxxxx/
[3] https://lore.kernel.org/linux-arm-msm/20220422211002.2012070-1-dmitry.baryshkov@xxxxxxxxxx/
Dmitry Baryshkov (10):
PCI: qcom: Revert "PCI: qcom: Add support for handling MSIs from 8
endpoints"
PCI: dwc: Propagate error from dma_mapping_error()
PCI: dwc: Correct msi_irq condition in dw_pcie_free_msi()
PCI: dwc: Convert msi_irq to the array
PCI: dwc: split MSI IRQ parsing/allocation to a separate function
PCI: dwc: Handle MSIs routed to multiple GIC interrupts
PCI: dwc: Implement special ISR handler for split MSI IRQ setup
PCI: qcom: Handle MSIs routed to multiple GIC interrupts
dt-bindings: PCI: qcom: Support additional MSI interrupts
arm64: dts: qcom: sm8250: provide additional MSI interrupts
.../devicetree/bindings/pci/qcom,pcie.yaml | 53 ++++-
arch/arm64/boot/dts/qcom/sm8250.dtsi | 12 +-
drivers/pci/controller/dwc/pci-dra7xx.c | 2 +-
drivers/pci/controller/dwc/pci-exynos.c | 2 +-
.../pci/controller/dwc/pcie-designware-host.c | 213 +++++++++++++-----
drivers/pci/controller/dwc/pcie-designware.h | 3 +-
drivers/pci/controller/dwc/pcie-keembay.c | 2 +-
drivers/pci/controller/dwc/pcie-qcom.c | 14 +-
drivers/pci/controller/dwc/pcie-spear13xx.c | 2 +-
drivers/pci/controller/dwc/pcie-tegra194.c | 2 +-
10 files changed, 232 insertions(+), 73 deletions(-)
--
2.35.1
