Re: [PATCH v9 0/5] Enable rk356x PCIe controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am Dienstag, 10. Mai 2022, 23:11:18 CEST schrieb Peter Geis:
> On Fri, Apr 29, 2022 at 8:38 AM Peter Geis <pgwipeout@xxxxxxxxx> wrote:
> >
> > This series enables the DesignWare based PCIe controller on the rk356x
> > series of chips. We drop the fallback to the core driver due to
> > compatibility issues. We reset the PCIe controller at driver probe to
> > prevent issues in the future when firmware / kexec leaves the controller
> > in an unknown state. We add support for legacy interrupts for cards that
> > lack MSI support (which is partially broken currently). We then add the
> > device tree nodes to enable PCIe on the Quartz64 Model A.
> 
> Good Evening,
> 
> Just a gentle ping to see if there's anything outstanding here.

>From my side it looks good. I'll take patches 4+5 once the binding-change
from patch1 has been applied to some tree.


Heiko


> >
> > Patch 1 drops the snps,dw,pcie fallback from the dt-binding
> > Patch 2 resets the PCIe controller to prevent configuration bugs
> > Patch 3 adds legacy interrupt support to the driver
> > Patch 4 adds the device tree binding to the rk356x.dtsi
> > Patch 5 enables the PCIe controller on the Quartz64-A
> >
> > Changelog:
> > v9:
> > - move reset_control_assert out of rockchip_pcie_resource_get
> > - fix various formatting mistakes
> > - fix a checkpatch warning
> >
> > v8:
> > - add core reset patch
> > - simplify IRQ enable/disable functions
> > - drop spinlock
> > - only enable/disable IRQ requested
> > - only pass the IRQ register bits used to irq functions
> >
> > v7:
> > - drop assigned-clocks
> >
> > v6:
> > - fix a ranges issue
> > - point to GIC instead of ITS
> >
> > v5:
> > - fix incorrect series (apologies for the v4 spam)
> >
> > v4:
> > - drop the ITS modification, poor compatibility is better than
> >   completely broken
> >
> > v3:
> > - drop select node from dt-binding
> > - convert to for_each_set_bit
> > - convert to generic_handle_domain_irq
> > - drop unncessary dev_err
> > - reorder irq_chip items
> > - change to level_irq
> > - install the handler after initializing the domain
> >
> > v2:
> > - Define PCIE_CLIENT_INTR_STATUS_LEGACY
> > - Fix PCIE_LEGACY_INT_ENABLE to only enable the RC interrupts
> > - Add legacy interrupt enable/disable support
> >
> >
> > Peter Geis (5):
> >   dt-bindings: PCI: Remove fallback from Rockchip DesignWare binding
> >   PCI: rockchip-dwc: Reset core at driver probe
> >   PCI: rockchip-dwc: Add legacy interrupt support
> >   arm64: dts: rockchip: Add rk3568 PCIe2x1 controller
> >   arm64: dts: rockchip: Enable PCIe controller on quartz64-a
> >
> >  .../bindings/pci/rockchip-dw-pcie.yaml        |  12 +-
> >  .../boot/dts/rockchip/rk3566-quartz64-a.dts   |  34 +++++
> >  arch/arm64/boot/dts/rockchip/rk356x.dtsi      |  52 ++++++++
> >  drivers/pci/controller/dwc/pcie-dw-rockchip.c | 119 +++++++++++++++---
> >  4 files changed, 191 insertions(+), 26 deletions(-)
> >
> > --
> > 2.25.1
> >
> 







[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux