It's logically correct to undo everything what was done in case of an
error is discovered or in the corresponding cleanup counterpart. Otherwise
the host controller will be left in an undetermined state. Seeing the link
is set up in the Host-initialization method it will be right to
de-activate it there in the cleanup-on-error block and stop the link in
the antagonistic routine - dw_pcie_host_deinit(). The link de-activation
is a platform-specific thing and is supposed to be implemented in the
framework of the dw_pcie_ops.stop_link() operation.
Fixes: 886a9c134755 ("PCI: dwc: Move link handling into common code")
Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
.../pci/controller/dwc/pcie-designware-host.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index 2fa86f32d964..7403b1709726 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -420,8 +420,14 @@ int dw_pcie_host_init(struct pcie_port *pp)
bridge->sysdata = pp;
ret = pci_host_probe(bridge);
- if (!ret)
- return 0;
+ if (ret)
+ goto err_stop_link;
+
+ return 0;
+
+err_stop_link:
+ if (pci->ops && pci->ops->stop_link)
+ pci->ops->stop_link(pci);
err_free_msi:
if (pp->has_msi_ctrl)
@@ -432,8 +438,14 @@ EXPORT_SYMBOL_GPL(dw_pcie_host_init);
void dw_pcie_host_deinit(struct pcie_port *pp)
{
+ struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+
pci_stop_root_bus(pp->bridge->bus);
pci_remove_root_bus(pp->bridge->bus);
+
+ if (pci->ops && pci->ops->stop_link)
+ pci->ops->stop_link(pci);
+
if (pp->has_msi_ctrl)
dw_pcie_free_msi(pp);
}
--
2.35.1
