From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
QMP PHY driver already does clk_prepare_enable()/_disable() pipe_clk.
Remove extra calls to enable/disable this clock from the PCIe driver, so
that the PHY driver can manage the clock on its own.
Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
---
drivers/pci/controller/dwc/pcie-qcom.c | 44 ++------------------------
1 file changed, 3 insertions(+), 41 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 774d486bf2f7..6e6e40fbfc13 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -128,7 +128,6 @@ struct qcom_pcie_resources_2_3_2 {
struct clk *master_clk;
struct clk *slave_clk;
struct clk *cfg_clk;
- struct clk *pipe_clk;
struct regulator_bulk_data supplies[QCOM_PCIE_2_3_2_MAX_SUPPLY];
};
@@ -165,7 +164,6 @@ struct qcom_pcie_resources_2_7_0 {
int num_clks;
struct regulator_bulk_data supplies[2];
struct reset_control *pci_reset;
- struct clk *pipe_clk;
struct clk *pipe_clk_src;
struct clk *phy_pipe_clk;
struct clk *ref_clk_src;
@@ -597,8 +595,7 @@ static int qcom_pcie_get_resources_2_3_2(struct qcom_pcie *pcie)
if (IS_ERR(res->slave_clk))
return PTR_ERR(res->slave_clk);
- res->pipe_clk = devm_clk_get(dev, "pipe");
- return PTR_ERR_OR_ZERO(res->pipe_clk);
+ return 0;
}
static void qcom_pcie_deinit_2_3_2(struct qcom_pcie *pcie)
@@ -613,13 +610,6 @@ static void qcom_pcie_deinit_2_3_2(struct qcom_pcie *pcie)
regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
}
-static void qcom_pcie_post_deinit_2_3_2(struct qcom_pcie *pcie)
-{
- struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
-
- clk_disable_unprepare(res->pipe_clk);
-}
-
static int qcom_pcie_init_2_3_2(struct qcom_pcie *pcie)
{
struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
@@ -694,22 +684,6 @@ static int qcom_pcie_init_2_3_2(struct qcom_pcie *pcie)
return ret;
}
-static int qcom_pcie_post_init_2_3_2(struct qcom_pcie *pcie)
-{
- struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
- struct dw_pcie *pci = pcie->pci;
- struct device *dev = pci->dev;
- int ret;
-
- ret = clk_prepare_enable(res->pipe_clk);
- if (ret) {
- dev_err(dev, "cannot prepare/enable pipe clock\n");
- return ret;
- }
-
- return 0;
-}
-
static int qcom_pcie_get_resources_2_4_0(struct qcom_pcie *pcie)
{
struct qcom_pcie_resources_2_4_0 *res = &pcie->res.v2_4_0;
@@ -1198,8 +1172,7 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
return PTR_ERR(res->ref_clk_src);
}
- res->pipe_clk = devm_clk_get(dev, "pipe");
- return PTR_ERR_OR_ZERO(res->pipe_clk);
+ return 0;
}
static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
@@ -1292,14 +1265,7 @@ static int qcom_pcie_post_init_2_7_0(struct qcom_pcie *pcie)
if (pcie->cfg->pipe_clk_need_muxing)
clk_set_parent(res->pipe_clk_src, res->phy_pipe_clk);
- return clk_prepare_enable(res->pipe_clk);
-}
-
-static void qcom_pcie_post_deinit_2_7_0(struct qcom_pcie *pcie)
-{
- struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
-
- clk_disable_unprepare(res->pipe_clk);
+ return 0;
}
static int qcom_pcie_link_up(struct dw_pcie *pci)
@@ -1449,9 +1415,7 @@ static const struct qcom_pcie_ops ops_1_0_0 = {
static const struct qcom_pcie_ops ops_2_3_2 = {
.get_resources = qcom_pcie_get_resources_2_3_2,
.init = qcom_pcie_init_2_3_2,
- .post_init = qcom_pcie_post_init_2_3_2,
.deinit = qcom_pcie_deinit_2_3_2,
- .post_deinit = qcom_pcie_post_deinit_2_3_2,
.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
};
@@ -1478,7 +1442,6 @@ static const struct qcom_pcie_ops ops_2_7_0 = {
.deinit = qcom_pcie_deinit_2_7_0,
.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
.post_init = qcom_pcie_post_init_2_7_0,
- .post_deinit = qcom_pcie_post_deinit_2_7_0,
};
/* Qcom IP rev.: 1.9.0 */
@@ -1488,7 +1451,6 @@ static const struct qcom_pcie_ops ops_1_9_0 = {
.deinit = qcom_pcie_deinit_2_7_0,
.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
.post_init = qcom_pcie_post_init_2_7_0,
- .post_deinit = qcom_pcie_post_deinit_2_7_0,
.config_sid = qcom_pcie_config_sid_sm8250,
};
--
2.35.1
