From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
Add Nodes to Bananapi-R2-Pro board to support PCIe v3 and
set pcie regulators to always on.
Signed-off-by: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
---
.../boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 79 +++++++++++++++++++
1 file changed, 79 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
index 2700fb18a3bc..e3a0f7d219a2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
@@ -74,6 +74,67 @@ vcc5v0_sys: vcc5v0-sys {
vin-supply = <&dc_12v>;
};
+ pcie30_avdd0v9: pcie30-avdd0v9 {
+ compatible = "regulator-fixed";
+ regulator-name = "pcie30_avdd0v9";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ vin-supply = <&vcc3v3_sys>;
+ };
+
+ pcie30_avdd1v8: pcie30-avdd1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "pcie30_avdd1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc3v3_sys>;
+ };
+
+ /* pi6c pcie clock generator feeds both ports */
+ vcc3v3_pi6c_05: vcc3v3_pi6c_05-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_pcie";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <20000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ /* actually fed by vcc3v3_sys, dependent on pi6c clock generator */
+ vcc3v3_minipcie: vcc3v3_minipcie-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_minipcie";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <5000>;
+ vin-supply = <&vcc3v3_pi6c_05>;
+ };
+
+ /* actually fed by vcc3v3_sys, dependent on pi6c clock generator */
+ vcc3v3_ngff: vcc3v3_ngff-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_ngff";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio4 RK_PC1 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <5000>;
+ vin-supply = <&vcc3v3_pi6c_05>;
+ };
+
vbus: vbus {
compatible = "regulator-fixed";
regulator-name = "vbus";
@@ -411,6 +472,24 @@ rgmii_phy1: ethernet-phy@0 {
};
};
+&pcie30phy {
+ status = "okay";
+};
+
+&pcie3x1 {
+ rockchip,bifurcation;
+ reset-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_ngff>;
+ status = "okay";
+};
+
+&pcie3x2 {
+ rockchip,bifurcation;
+ reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_minipcie>;
+ status = "okay";
+};
+
&pinctrl {
leds {
blue_led_pin: blue-led-pin {
--
2.25.1
