On 3/16/2022 8:51 AM, Nirmal Patel wrote: > From: Nirmal Patel <nirmal.patel@xxxxxxxxxxxxxxx> > > VMD creates and assigns a separate IRQ domain only when MSI remapping is > enabled. For example VMD-MSI. But VMD doesn't assign IRQ domain when > MSI remapping is disabled resulting child devices getting default > PCI-MSI IRQ domain. Now when interrupt remapping is enabled by > intel-iommu all the PCI devices are assigned INTEL-IR-MSI domain > including VMD endpoints. But devices behind VMD get PCI-MSI IRQ domain > when VMD create a root bus and configures child devices. > > As a result DMAR errors were observed when interrupt remapping was > enabled on Intel Icelake CPUs. For instance: > > DMAR: DRHD: handling fault status reg 2 > DMAR: [INTR-REMAP] Request device [0xe2:0x00.0] fault index 0xa00 [fault reason 0x25] Blocked a compatibility format interrupt request > > Acked-by: Dan Williams <dan.j.williams@xxxxxxxxx> > Signed-off-by: Nirmal Patel <nirmal.patel@xxxxxxxxxxxxxxx> > --- > drivers/pci/controller/vmd.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c > index cc166c683638..3a6570e5b765 100644 > --- a/drivers/pci/controller/vmd.c > +++ b/drivers/pci/controller/vmd.c > @@ -853,6 +853,8 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features) > vmd_attach_resources(vmd); > if (vmd->irq_domain) > dev_set_msi_domain(&vmd->bus->dev, vmd->irq_domain); > + else > + dev_set_msi_domain(&vmd->bus->dev, dev_get_msi_domain(&vmd->dev->dev)); > > vmd_acpi_begin(); > Gentle ping! Thanks nirmal
