On Thu, Mar 24, 2022 at 04:48:32AM +0300, Serge Semin wrote:
> There is no point in allocating an additional memory for the data target
> regions passed then to the client drivers. Just use the already available
> structures defined in the dw_edma_chip instance.
>
> Note these regions are unused in normal circumstances since they are
> specific to the case of eDMA being embedded into the DW PCIe End-point and
> having it's CSRs accessible over a End-point' BAR. This case is only known
> to be implemented as a part of the Synopsys PCIe EndPoint IP prototype
> kit.
>
> Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
Thanks,
Mani
> ---
> drivers/dma/dw-edma/dw-edma-core.c | 21 ++++-----------------
> 1 file changed, 4 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/dma/dw-edma/dw-edma-core.c b/drivers/dma/dw-edma/dw-edma-core.c
> index bc530f0a2468..dbe1119fd1d2 100644
> --- a/drivers/dma/dw-edma/dw-edma-core.c
> +++ b/drivers/dma/dw-edma/dw-edma-core.c
> @@ -744,7 +744,6 @@ static void dw_edma_free_chan_resources(struct dma_chan *dchan)
> static int dw_edma_channel_setup(struct dw_edma_chip *chip, u32 wr_alloc,
> u32 rd_alloc)
> {
> - struct dw_edma_region *dt_region;
> struct device *dev = chip->dev;
> struct dw_edma *dw = chip->dw;
> struct dw_edma_chan *chan;
> @@ -761,12 +760,6 @@ static int dw_edma_channel_setup(struct dw_edma_chip *chip, u32 wr_alloc,
> for (i = 0; i < ch_cnt; i++) {
> chan = &dw->chan[i];
>
> - dt_region = devm_kzalloc(dev, sizeof(*dt_region), GFP_KERNEL);
> - if (!dt_region)
> - return -ENOMEM;
> -
> - chan->vc.chan.private = dt_region;
> -
> chan->dw = dw;
>
> if (i < dw->wr_ch_cnt) {
> @@ -814,17 +807,11 @@ static int dw_edma_channel_setup(struct dw_edma_chip *chip, u32 wr_alloc,
> chan->msi.data);
>
> chan->vc.desc_free = vchan_free_desc;
> - vchan_init(&chan->vc, dma);
> + chan->vc.chan.private = chan->dir == EDMA_DIR_WRITE ?
> + &dw->chip->dt_region_wr[chan->id] :
> + &dw->chip->dt_region_rd[chan->id];
>
> - if (chan->dir == EDMA_DIR_WRITE) {
> - dt_region->paddr = chip->dt_region_wr[chan->id].paddr;
> - dt_region->vaddr = chip->dt_region_wr[chan->id].vaddr;
> - dt_region->sz = chip->dt_region_wr[chan->id].sz;
> - } else {
> - dt_region->paddr = chip->dt_region_rd[chan->id].paddr;
> - dt_region->vaddr = chip->dt_region_rd[chan->id].vaddr;
> - dt_region->sz = chip->dt_region_rd[chan->id].sz;
> - }
> + vchan_init(&chan->vc, dma);
>
> dw_edma_v0_core_device_config(chan);
> }
> --
> 2.35.1
>
