Hi Ira,
> Here is the code to be more clear...
>
>
> drivers/cxl/pci.c:
>
> int cxl_pci_create_doe_devices(struct pci_dev *pdev)
> {
> struct device *dev = &pdev->dev;
> bool use_irq = true;
> int irqs = 0;
> u16 off = 0;
> int rc;
>
> pci_doe_for_each_off(pdev, off)
> irqs++;
> pci_info(pdev, "Found %d DOE mailbox's\n", irqs);
>
> /*
> * Allocate enough vectors for the DOE's
> */
> rc = pci_alloc_irq_vectors(pdev, irqs, irqs, PCI_IRQ_MSI |
> PCI_IRQ_MSIX);
> if (rc != irqs) {
> pci_err(pdev, "Not enough interrupts for all the DOEs; use polling\n");
> use_irq = false;
> /* Some got allocated; clean them up */
> if (rc > 0)
> cxl_pci_free_irq_vectors(pdev);
> } else {
> /*
> * Enabling bus mastering is require for MSI/MSIx. It could be
> * done later within the DOE initialization, but as it
> * potentially has other impacts keep it here when setting up
> * the IRQ's.
> */
> pci_set_master(pdev);
> rc = devm_add_action_or_reset(dev,
> cxl_pci_free_irq_vectors,
> pdev);
> if (rc)
> return rc;
> }
>
> pci_doe_for_each_off(pdev, off) {
> ...
> /* Create each auxiliary device which internally calls */
> pci_doe_create_mb(pdev, off, use_irq);
> ...
> }
> ...
> }
>
>
> drivers/pci/pci-doe.c:
>
> static irqreturn_t pci_doe_irq_handler(int irq, void *data)
> {
> ...
> }
>
> static int pci_doe_request_irq(struct pci_doe_mb *doe_mb)
> {
> struct pci_dev *pdev = doe_mb->pdev;
> int offset = doe_mb->cap_offset;
> int doe_irq, rc;
> u32 val;
>
> pci_read_config_dword(pdev, offset + PCI_DOE_CAP, &val);
>
> if (!FIELD_GET(PCI_DOE_CAP_INT, val))
> return -ENOTSUPP;
>
> doe_irq = FIELD_GET(PCI_DOE_CAP_IRQ, val);
> rc = pci_request_irq(pdev, doe_irq, pci_doe_irq_handler,
> NULL, doe_mb,
> "DOE[%d:%s]", doe_irq, pci_name(pdev));
> if (rc)
> return rc;
>
> doe_mb->irq = doe_irq;
> pci_write_config_dword(pdev, offset + PCI_DOE_CTRL,
> PCI_DOE_CTRL_INT_EN);
> return 0;
> }
>
> struct pci_doe_mb *pci_doe_create_mb(struct pci_dev *pdev, u16 cap_offset,
> bool use_irq)
> {
> ...
> if (use_irq) {
> rc = pci_doe_request_irq(doe_mb);
> if (rc)
> pci_err(pdev, "DOE request irq failed for mailbox @ %u : %d\n",
> cap_offset, rc);
> }
> ...
> }
>
>
> Does this look reasonable?
I'm a little nervous about how we are going to make DOEs on switches work.
Guess I'll do an experiment once your next version is out and check we
can do that reasonably cleanly. For switches we'll probably have to
check for DOEs on all such ports and end up with infrastructure to
map to all protocols we might see on a switch.
Jonathan
>
