+Patrick Huang
On 3/17/22 08:10, Mario Limonciello wrote:
Some drives from SSSTC are showing stability problems after s0i3
entry when the Linux kernel is in s2idle loop if LTR has been
enabled. This leads to failures to resume.
This appears to be a firmware issue specific to SSSTC SSDs, so quirk
them to avoid LTR being enabled during the suspend process.
Link: https://lore.kernel.org/linux-nvme/20220315072233.GA2288@xxxxxx/T/#mb9b5782220a32e2c69fe37cf04ae1501b0f48221
Signed-off-by: Mario Limonciello <mario.limonciello@xxxxxxx>
---
changes from v1->v2:
* Move into a PCI quirk, handle entirely in PCI subsystem
Patrick has been running stress tests with this patch and reported a
failure. When it's figured out we will re-submit V3.
If any concerns to this approach in V2 though, comments still welcome.
Thanks,
drivers/pci/quirks.c | 17 +++++++++++++++++
include/linux/pci_ids.h | 2 ++
2 files changed, 19 insertions(+)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index d2dd6a6cda60..005142d574e7 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -5879,3 +5879,20 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1533, rom_bar_overlap_defect);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1536, rom_bar_overlap_defect);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1537, rom_bar_overlap_defect);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1538, rom_bar_overlap_defect);
+
+/*
+ * SSSTC firmware will continue to send LTR requests after device has entered D3
+ *
+ * This behavior causes problems when entering/exit s2idle, so avoid letting LTR
+ * be enabled during suspend.
+ */
+static void ssstc_disable_ltr(struct pci_dev *pdev)
+{
+ pcie_capability_clear_word(pdev, PCI_EXP_DEVCTL2, PCI_EXP_DEVCTL2_LTR_EN);
+}
+static void ssstc_enable_ltr(struct pci_dev *pdev)
+{
+ pcie_capability_set_word(pdev, PCI_EXP_DEVCTL2, PCI_EXP_DEVCTL2_LTR_EN);
+}
+DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_SSSTC, 0x9100, ssstc_disable_ltr);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SSSTC, 0x9100, ssstc_enable_ltr);
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 130949c3b486..ab47ccdd2ece 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2568,6 +2568,8 @@
#define PCI_VENDOR_ID_TEKRAM 0x1de1
#define PCI_DEVICE_ID_TEKRAM_DC290 0xdc29
+#define PCI_VENDOR_ID_SSSTC 0x1e95
+
#define PCI_VENDOR_ID_TEHUTI 0x1fc9
#define PCI_DEVICE_ID_TEHUTI_3009 0x3009
#define PCI_DEVICE_ID_TEHUTI_3010 0x3010
