Re: [PATCH v5 0/9] Enable designware PCI EP EDMA locally

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Mar 10, 2022 at 01:24:48PM -0600, Frank Li wrote:
> Default Designware EDMA just probe remotely at host side.
> This patch allow EDMA driver can probe at EP side.
> 
> 1. Clean up patch
>    dmaengine: dw-edma: Detach the private data and chip info structures
>    dmaengine: dw-edma: remove unused field irq in struct dw_edma_chip
>    dmaengine: dw-edma: change rg_region to reg_base in struct
>    dmaengine: dw-edma: rename wr(rd)_ch_cnt to ll_wr(rd)_cnt in struct
> 
> 2. Enhance EDMA driver to allow prode eDMA at EP side
>    dmaengine: dw-edma: Add support for chip specific flags   
>    dmaengine: dw-edma: Add DW_EDMA_CHIP_32BIT_DBI for chip specific flags
> 
> 3. Bugs fix at EDMA driver when probe eDMA at EP side
>    dmaengine: dw-edma: Fix programming the source & dest addresses for ep
>    dmaengine: dw-edma: Don't rely on the deprecated "direction" member
> 
> 4. change pci-epf-test to use EDMA driver to transfer data.
>    PCI: endpoint: functions/pci-epf-test: Support PCI controller DMA
> 
> 5. Using imx8dxl to do test, but some EP functions still have not
> upstream yet. So below patch show how probe eDMA driver at EP
> controller driver.
> https://lore.kernel.org/linux-pci/20220309120149.GB134091@thinkpad/T/#m979eb506c73ab3cfca2e7a43635ecdaec18d8097
> 
> 
> 
> Frank Li (7):
>   dmaengine: dw-edma: Detach the private data and chip info structures
>   dmaengine: dw-edma: remove unused field irq in struct dw_edma_chip
>   dmaengine: dw-edma: change rg_region to reg_base in struct
>     dw_edma_chip
>   dmaengine: dw-edma: rename wr(rd)_ch_cnt to ll_wr(rd)_cnt in struct
>     dw_edma_chip

These should be consistently capitalized to match previous commits
(and the rest of your own commits :)):

s/remove unused/Remove unused/
s/change rg_region/Change rg_region/
s/rename wr/Rename wr/

>   dmaengine: dw-edma: Add support for chip specific flags
>   dmaengine: dw-edma: Add DW_EDMA_CHIP_32BIT_DBI for chip specific flags
>   PCI: endpoint: functions/pci-epf-test: Support PCI controller DMA

There are a couple commits that use the whole "PCI: endpoint:
functions/pci-epf-test:" prefix, but IMO it's a bit of overkill to use
so much space just for the prefix.

Maybe something like this would be enough?

  PCI: endpoint: Add embedded DMA controller test

> Manivannan Sadhasivam (2):
>   dmaengine: dw-edma: Fix programming the source & dest addresses for ep
>   dmaengine: dw-edma: Don't rely on the deprecated "direction" member
> 
>  drivers/dma/dw-edma/dw-edma-core.c            | 131 +++++++++++-------
>  drivers/dma/dw-edma/dw-edma-core.h            |  32 +----
>  drivers/dma/dw-edma/dw-edma-pcie.c            |  83 +++++------
>  drivers/dma/dw-edma/dw-edma-v0-core.c         |  46 +++---
>  drivers/dma/dw-edma/dw-edma-v0-debugfs.c      |  10 +-
>  drivers/pci/endpoint/functions/pci-epf-test.c | 108 +++++++++++++--
>  include/linux/dma/edma.h                      |  56 +++++++-
>  7 files changed, 298 insertions(+), 168 deletions(-)
> 
> -- 
> 2.24.0.rc1
> 



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux