Re: [PATCH v3 7/7] arm64: dts: qcom: sa8155: Enable PCIe nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 2 Mar 2022 at 23:31, Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx> wrote:
>
> SA8155p ADP board supports the PCIe0 controller in the RC
> mode (only). So add the support for the same.
>
> Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> Cc: Vinod Koul <vkoul@xxxxxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 42 ++++++++++++++++++++++++
>  1 file changed, 42 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> index 8756c2b25c7e..3f6b3ee404f5 100644
> --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> @@ -387,9 +387,51 @@ &usb_2_qmpphy {
>         vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
>  };
>
> +&pcie0 {
> +       status = "okay";
> +};
> +
> +&pcie0_phy {
> +       status = "okay";
> +       vdda-phy-supply = <&vreg_l18c_0p88>;
> +       vdda-pll-supply = <&vreg_l8c_1p2>;
> +};
> +
> +&pcie1_phy {
> +       vdda-phy-supply = <&vreg_l18c_0p88>;
> +       vdda-pll-supply = <&vreg_l8c_1p2>;
> +};
> +
>  &tlmm {
>         gpio-reserved-ranges = <0 4>;
>
> +       bt_en_default: bt_en_default {
> +               mux {
> +                       pins = "gpio172";
> +                       function = "gpio";
> +               };
> +
> +               config {
> +                       pins = "gpio172";
> +                       drive-strength = <2>;
> +                       bias-pull-down;
> +               };
> +       };
> +
> +       wlan_en_default: wlan_en_default {
> +               mux {
> +                       pins = "gpio169";
> +                       function = "gpio";
> +               };
> +
> +               config {
> +                       pins = "gpio169";
> +                       drive-strength = <16>;
> +                       output-high;
> +                       bias-pull-up;
> +               };
> +       };
> +

Not related to PCIe

>         usb2phy_ac_en1_default: usb2phy_ac_en1_default {
>                 mux {
>                         pins = "gpio113";
> --
> 2.35.1
>


-- 
With best wishes
Dmitry



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux