PCIe ports reserved for VMD use are not visible to BIOS and therefore not configured to enable PCIE ASPM. Additionally, PCIE LTR values may be left unset since BIOS will set a default maximum LTR value on endpoints to ensure that they don't block SoC power management. Lack of this programming results in high power consumption on laptops as reported in bugzilla [1]. For currently affected products, use pci_enable_default_link_state to set the allowed link states for devices on the root ports. Also set the LTR value to the maximum value needed for the SoC. Per the VMD hardware team future products using VMD will enable BIOS configuration of these capabilities. This solution is a workaround for current products that mainly targets laptops. Support is not provided if a switch used nor for hotplug. [1] https://bugzilla.kernel.org/show_bug.cgi?id=213717 Signed-off-by: Michael Bottini <michael.a.bottini@xxxxxxxxxxxxxxx> Signed-off-by: David E. Box <david.e.box@xxxxxxxxxxxxxxx> --- V6 - Set ASPM first before setting LTR. This is needed because some devices may only have LTR set by BIOS and not ASPM - Skip setting the LTR if the current LTR in non-zero. V5 - Provide the LTR value as driver data. - Use DWORD for the config space write to avoid PCI WORD access bug. - Set ASPM links firsts, enabling all link states, before setting a default LTR if the capability is present - Add kernel message that VMD is setting the device LTR. V4 - Refactor vmd_enable_apsm() to exit early, making the lines shorter and more readable. Suggested by Christoph. V3 - No changes V2 - Use return status to print pci_info message if ASPM cannot be enabled. - Add missing static declaration, caught by lkp@xxxxxxxxx drivers/pci/controller/vmd.c | 66 +++++++++++++++++++++++++++++++++--- 1 file changed, 62 insertions(+), 4 deletions(-) diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c index cde6e2cba210..8525bb8312f2 100644 --- a/drivers/pci/controller/vmd.c +++ b/drivers/pci/controller/vmd.c @@ -67,10 +67,19 @@ enum vmd_features { * interrupt handling. */ VMD_FEAT_CAN_BYPASS_MSI_REMAP = (1 << 4), + + /* + * Enable ASPM on the PCIE root ports and set the default LTR of the + * storage devices on platforms where these values are not configured by + * BIOS. This is needed for laptops, which require these settings for + * proper power management of the SoC. + */ + VMD_FEAT_BIOS_PM_QUIRK = (1 << 5), }; struct vmd_device_data { enum vmd_features features; + u16 ltr; }; static DEFINE_IDA(vmd_instance_ida); @@ -714,6 +723,45 @@ static void vmd_copy_host_bridge_flags(struct pci_host_bridge *root_bridge, vmd_bridge->native_dpc = root_bridge->native_dpc; } +/* + * Enable ASPM and LTR settings on devices that aren't configured by BIOS. + */ +static int vmd_pm_enable_quirk(struct pci_dev *pdev, void *userdata) +{ + struct vmd_device_data *info = userdata; + u32 ltr_reg; + int pos; + + if (!(info->features & VMD_FEAT_BIOS_PM_QUIRK)) + return 0; + + pci_enable_default_link_state(pdev, PCIE_LINK_STATE_ALL); + + pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_LTR); + if (!pos) + return 0; + + /* + * Skip if the max snoop LTR is non-zero, indicating BIOS has set it + * so the LTR quirk is not needed. + */ + pci_read_config_dword(pdev, pos + PCI_LTR_MAX_SNOOP_LAT, <r_reg); + if (!!(ltr_reg & (PCI_LTR_VALUE_MASK | PCI_LTR_SCALE_MASK))) + return 0; + + /* + * Set the default values to the maximum required by the platform to + * allow the deepest power management savings. Write as a DWORD where + * the lower word is the max snoop latency and the upper word is the + * max non-snoop latency. + */ + ltr_reg = (info->ltr << 16) | info->ltr; + pci_write_config_dword(pdev, pos + PCI_LTR_MAX_SNOOP_LAT, ltr_reg); + pci_info(pdev, "VMD: Default LTR set\n"); + + return 0; +} + static int vmd_enable_domain(struct vmd_dev *vmd, struct vmd_device_data *info) { struct pci_sysdata *sd = &vmd->sysdata; @@ -867,6 +915,8 @@ static int vmd_enable_domain(struct vmd_dev *vmd, struct vmd_device_data *info) pci_reset_bus(child->self); pci_assign_unassigned_bus_resources(vmd->bus); + pci_walk_bus(vmd->bus, vmd_pm_enable_quirk, info); + /* * VMD root buses are virtual and don't return true on pci_is_pcie() * and will fail pcie_bus_configure_settings() early. It can instead be @@ -1016,28 +1066,36 @@ static const struct pci_device_id vmd_ids[] = { (kernel_ulong_t)&(struct vmd_device_data) { .features = VMD_FEAT_HAS_MEMBAR_SHADOW_VSCAP | VMD_FEAT_HAS_BUS_RESTRICTIONS | - VMD_FEAT_OFFSET_FIRST_VECTOR, + VMD_FEAT_OFFSET_FIRST_VECTOR | + VMD_FEAT_BIOS_PM_QUIRK, + .ltr = 0x1003, /* 3145728 ns */ }, }, { PCI_VDEVICE(INTEL, 0x4c3d), (kernel_ulong_t)&(struct vmd_device_data) { .features = VMD_FEAT_HAS_MEMBAR_SHADOW_VSCAP | VMD_FEAT_HAS_BUS_RESTRICTIONS | - VMD_FEAT_OFFSET_FIRST_VECTOR, + VMD_FEAT_OFFSET_FIRST_VECTOR | + VMD_FEAT_BIOS_PM_QUIRK, + .ltr = 0x1003, /* 3145728 ns */ }, }, { PCI_VDEVICE(INTEL, 0xa77f), (kernel_ulong_t)&(struct vmd_device_data) { .features = VMD_FEAT_HAS_MEMBAR_SHADOW_VSCAP | VMD_FEAT_HAS_BUS_RESTRICTIONS | - VMD_FEAT_OFFSET_FIRST_VECTOR, + VMD_FEAT_OFFSET_FIRST_VECTOR | + VMD_FEAT_BIOS_PM_QUIRK, + .ltr = 0x1003, /* 3145728 ns */ }, }, { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_VMD_9A0B), (kernel_ulong_t)&(struct vmd_device_data) { .features = VMD_FEAT_HAS_MEMBAR_SHADOW_VSCAP | VMD_FEAT_HAS_BUS_RESTRICTIONS | - VMD_FEAT_OFFSET_FIRST_VECTOR, + VMD_FEAT_OFFSET_FIRST_VECTOR | + VMD_FEAT_BIOS_PM_QUIRK, + .ltr = 0x1003, /* 3145728 ns */ }, }, { } -- 2.25.1
