Re: [PATCH v5 4/5] PCI: qcom: Add interconnect support to 2.7.0/1.9.0 ops

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat 18 Dec 06:10 PST 2021, Dmitry Baryshkov wrote:

> Add optional interconnect support for the 2.7.0/1.9.0 hosts. Set the
> bandwidth according to the values from the downstream driver.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index d8d400423a0a..55ac3caa6d7d 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -12,6 +12,7 @@
>  #include <linux/crc8.h>
>  #include <linux/delay.h>
>  #include <linux/gpio/consumer.h>
> +#include <linux/interconnect.h>
>  #include <linux/interrupt.h>
>  #include <linux/io.h>
>  #include <linux/iopoll.h>
> @@ -167,6 +168,7 @@ struct qcom_pcie_resources_2_7_0 {
>  	struct clk *pipe_clk_src;
>  	struct clk *phy_pipe_clk;
>  	struct clk *ref_clk_src;
> +	struct icc_path *path;

I think it's fair to assume that pretty much all platforms will have a
data path to reach the config registers and for the PCI to reach DDR.

So how about we place this in the common struct qcom_pcie instead?

Regards,
Bjorn

>  };
>  
>  union qcom_pcie_resources {
> @@ -1121,6 +1123,10 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
>  	if (IS_ERR(res->pci_reset))
>  		return PTR_ERR(res->pci_reset);
>  
> +	res->path = devm_of_icc_get(dev, "pci");
> +	if (IS_ERR(res->path))
> +		return PTR_ERR(res->path);
> +
>  	res->supplies[0].supply = "vdda";
>  	res->supplies[1].supply = "vddpe-3v3";
>  	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(res->supplies),
> @@ -1183,6 +1189,9 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
>  	if (pcie->cfg->pipe_clk_need_muxing)
>  		clk_set_parent(res->pipe_clk_src, res->phy_pipe_clk);
>  
> +	if (res->path)
> +		icc_set_bw(res->path, 500, 800);
> +
>  	ret = clk_bulk_prepare_enable(res->num_clks, res->clks);
>  	if (ret < 0)
>  		goto err_disable_regulators;
> @@ -1241,6 +1250,8 @@ static void qcom_pcie_deinit_2_7_0(struct qcom_pcie *pcie)
>  	struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
>  
>  	clk_bulk_disable_unprepare(res->num_clks, res->clks);
> +	if (res->path)
> +		icc_set_bw(res->path, 0, 0);
>  
>  	/* Set TCXO as clock source for pcie_pipe_clk_src */
>  	if (pcie->cfg->pipe_clk_need_muxing)
> -- 
> 2.34.1
> 



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux