On 10/03/2011 05:12 PM, Jon Mason wrote:
PCI: Workaround for Intel MPS errata
Intel 5000 and 5100 series memory controllers have a known issue if read
completion coalescing is enabled (the default setting) and the PCI-E
Maximum Payload Size is set to 256B. To work around this issue, disable
read completion coalescing if the MPS is 256B.
It is worth noting that there is no function to undo the disable of read
completion coalescing, and the performance benefit of read completion
coalescing will be lost if the MPS is set from 256B to 128B. It is only
possible to have this issue via hotplug removing the only 256B MPS
device in the system (thus making all of the other devices in the system
have a performance degradation without the benefit of any 256B
transfers). Therefore, this trade off is acceptable.
http://www.intel.com/content/dam/doc/specification-update/5000-chipset-memory-controller-hub-specification-update.pdf
http://www.intel.com/content/dam/doc/specification-update/5100-memory-controller-hub-chipset-specification-update.pdf
Thanks to Jesse Brandeburg and Ben Hutchings for providing insight into
the problem.
Reported-by: Avi Kivity<avi@xxxxxxxxxx>
Signed-off-by: Jon Mason<mason@xxxxxxxx>
+
+ if (!(val& (1<< 10))) {
+ done = true;
+ return;
+ }
Here, you bail out if bit 10 is clear. So if we're here, it's set.
+
+ val |= (1<< 10);
Now it's even more set?
+ err = pci_bus_write_config_word(bus, 0, 0x48, val);
+ if (err) {
+ dev_err(&bus->dev, "Error attempting to write the read "
+ "completion coalescing register.\n");
+ return;
+ }
+
+ dev_info(&bus->dev, "Read completion coalescing disabled due "
+ "to hardware errata relating to 256B MPS.\n");
+
+ done = true;
+ }
+}
+
--
error compiling committee.c: too many arguments to function
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
