Add basic support for UniPhier NX1 SoC as non-legacy SoC. This includes
a compatible string, SoC-dependent data containing init() and wait()
functions for the controller.
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
---
drivers/pci/controller/dwc/pcie-uniphier-ep.c | 81 +++++++++++++++++++++++++++
1 file changed, 81 insertions(+)
diff --git a/drivers/pci/controller/dwc/pcie-uniphier-ep.c b/drivers/pci/controller/dwc/pcie-uniphier-ep.c
index 6c035fc45aaa..4d0a587c0ba5 100644
--- a/drivers/pci/controller/dwc/pcie-uniphier-ep.c
+++ b/drivers/pci/controller/dwc/pcie-uniphier-ep.c
@@ -10,6 +10,7 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/init.h>
+#include <linux/iopoll.h>
#include <linux/of_device.h>
#include <linux/pci.h>
#include <linux/phy/phy.h>
@@ -31,6 +32,17 @@
#define PCL_RSTCTRL2 0x0024
#define PCL_RSTCTRL_PHY_RESET BIT(0)
+#define PCL_PINCTRL0 0x002c
+#define PCL_PERST_PLDN_REGEN BIT(12)
+#define PCL_PERST_NOE_REGEN BIT(11)
+#define PCL_PERST_OUT_REGEN BIT(8)
+#define PCL_PERST_PLDN_REGVAL BIT(4)
+#define PCL_PERST_NOE_REGVAL BIT(3)
+#define PCL_PERST_OUT_REGVAL BIT(0)
+
+#define PCL_PIPEMON 0x0044
+#define PCL_PCLK_ALIVE BIT(15)
+
#define PCL_MODE 0x8000
#define PCL_MODE_REGEN BIT(8)
#define PCL_MODE_REGVAL BIT(0)
@@ -51,6 +63,9 @@
#define PCL_APP_INTX 0x8074
#define PCL_APP_INTX_SYS_INT BIT(0)
+#define PCL_APP_PM0 0x8078
+#define PCL_SYS_AUX_PWR_DET BIT(8)
+
/* assertion time of INTx in usec */
#define PCL_INTX_WIDTH_USEC 30
@@ -123,6 +138,55 @@ static void uniphier_pcie_pro5_init_ep(struct uniphier_pcie_ep_priv *priv)
msleep(100);
}
+static void uniphier_pcie_nx1_init_ep(struct uniphier_pcie_ep_priv *priv)
+{
+ u32 val;
+
+ /* set EP mode */
+ val = readl(priv->base + PCL_MODE);
+ val |= PCL_MODE_REGEN | PCL_MODE_REGVAL;
+ writel(val, priv->base + PCL_MODE);
+
+ /* use auxiliary power detection */
+ val = readl(priv->base + PCL_APP_PM0);
+ val |= PCL_SYS_AUX_PWR_DET;
+ writel(val, priv->base + PCL_APP_PM0);
+
+ /* assert PERST# */
+ val = readl(priv->base + PCL_PINCTRL0);
+ val &= ~(PCL_PERST_NOE_REGVAL | PCL_PERST_OUT_REGVAL
+ | PCL_PERST_PLDN_REGVAL);
+ val |= PCL_PERST_NOE_REGEN | PCL_PERST_OUT_REGEN
+ | PCL_PERST_PLDN_REGEN;
+ writel(val, priv->base + PCL_PINCTRL0);
+
+ uniphier_pcie_ltssm_enable(priv, false);
+
+ usleep_range(100000, 200000);
+
+ /* deassert PERST# */
+ val = readl(priv->base + PCL_PINCTRL0);
+ val |= PCL_PERST_OUT_REGVAL | PCL_PERST_OUT_REGEN;
+ writel(val, priv->base + PCL_PINCTRL0);
+}
+
+static int uniphier_pcie_nx1_wait_ep(struct uniphier_pcie_ep_priv *priv)
+{
+ u32 status;
+ int ret;
+
+ /* wait PIPE clock */
+ ret = readl_poll_timeout(priv->base + PCL_PIPEMON, status,
+ status & PCL_PCLK_ALIVE, 100000, 1000000);
+ if (ret) {
+ dev_err(priv->pci.dev,
+ "Failed to initialize controller in EP mode\n");
+ return ret;
+ }
+
+ return 0;
+}
+
static int uniphier_pcie_start_link(struct dw_pcie *pci)
{
struct uniphier_pcie_ep_priv *priv = to_uniphier_pcie(pci);
@@ -353,11 +417,28 @@ static const struct uniphier_pcie_ep_soc_data uniphier_pro5_data = {
},
};
+static const struct uniphier_pcie_ep_soc_data uniphier_nx1_data = {
+ .has_gio = false,
+ .init = uniphier_pcie_nx1_init_ep,
+ .wait = uniphier_pcie_nx1_wait_ep,
+ .features = {
+ .linkup_notifier = false,
+ .msi_capable = true,
+ .msix_capable = false,
+ .align = 1 << 12,
+ .bar_fixed_64bit = BIT(BAR_0) | BIT(BAR_2) | BIT(BAR_4),
+ },
+};
+
static const struct of_device_id uniphier_pcie_ep_match[] = {
{
.compatible = "socionext,uniphier-pro5-pcie-ep",
.data = &uniphier_pro5_data,
},
+ {
+ .compatible = "socionext,uniphier-nx1-pcie-ep",
+ .data = &uniphier_nx1_data,
+ },
{ /* sentinel */ },
};
--
2.7.4
