i.MX6QP PCIe supports the RESET logic, thus it can support
the L2 exit by the reset mechanism.
Enable the i.MX6QP PCIe suspend/resume operations support.
Signed-off-by: Richard Zhu <hongxing.zhu@xxxxxxx>
---
drivers/pci/controller/dwc/pci-imx6.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 784801f2f9e6..62262483470a 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -995,6 +995,7 @@ static void imx6_pcie_pm_turnoff(struct imx6_pcie *imx6_pcie)
/* Others poke directly at IOMUXC registers */
switch (imx6_pcie->drvdata->variant) {
case IMX6SX:
+ case IMX6QP:
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6SX_GPR12_PCIE_PM_TURN_OFF,
IMX6SX_GPR12_PCIE_PM_TURN_OFF);
@@ -1307,7 +1308,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
[IMX6QP] = {
.variant = IMX6QP,
.flags = IMX6_PCIE_FLAG_IMX6_PHY |
- IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE,
+ IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE |
+ IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
.dbi_length = 0x200,
},
[IMX7D] = {
--
2.25.1
