[PATCH v1] arm64: dts: qcom: sc7280: Fix pcie gpio entries

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Current gpio's in IDP file are not mapping properly,
seeing device timedout failures.

Corrected pcie gpio entries in dtsi files.

Fixes: 4e24d227aa77 ("arm64: dts: qcom: sc7280: Add PCIe nodes for IDP board")

Signed-off-by: Prasad Malisetty <quic_pmaliset@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 35 ++++++++++++++------------------
 arch/arm64/boot/dts/qcom/sc7280.dtsi     | 10 ++++++++-
 2 files changed, 24 insertions(+), 21 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 78da9ac..84bf9d2 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -243,9 +243,6 @@
 	perst-gpio = <&tlmm 2 GPIO_ACTIVE_LOW>;
 
 	vddpe-3v3-supply = <&nvme_3v3_regulator>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie1_reset_n>, <&pcie1_wake_n>;
 };
 
 &pcie1_phy {
@@ -360,6 +357,21 @@
 
 /* PINCTRL - additions to nodes defined in sc7280.dtsi */
 
+&pcie1_reset_n {
+	pins = "gpio2";
+
+	drive-strength = <16>;
+	output-low;
+	bias-disable;
+};
+
+&pcie1_wake_n {
+	pins = "gpio3";
+
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
 &pm7325_gpios {
 	key_vol_up_default: key-vol-up-default {
 		pins = "gpio6";
@@ -436,23 +448,6 @@
 		function = "gpio";
 	};
 
-	pcie1_reset_n: pcie1-reset-n {
-		pins = "gpio2";
-		function = "gpio";
-
-		drive-strength = <16>;
-		output-low;
-		bias-disable;
-	};
-
-	pcie1_wake_n: pcie1-wake-n {
-		pins = "gpio3";
-		function = "gpio";
-
-		drive-strength = <2>;
-		bias-pull-up;
-	};
-
 	qup_uart7_sleep_cts: qup-uart7-sleep-cts {
 		pins = "gpio28";
 		function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index d4009cc..2e14c37 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -1640,7 +1640,7 @@
 			phy-names = "pciephy";
 
 			pinctrl-names = "default";
-			pinctrl-0 = <&pcie1_clkreq_n>;
+			pinctrl-0 = <&pcie1_clkreq_n>, <&pcie1_reset_n>, <&pcie1_wake_n>;
 
 			iommus = <&apps_smmu 0x1c80 0x1>;
 
@@ -3272,6 +3272,14 @@
 				bias-pull-up;
 			};
 
+			pcie1_reset_n: pcie1-reset-n {
+				function = "gpio";
+			};
+
+			pcie1_wake_n: pcie1-wake-n {
+				function = "gpio";
+			};
+
 			dp_hot_plug_det: dp-hot-plug-det {
 				pins = "gpio47";
 				function = "dp_hot";
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux