Cross host bridge verification primarily determines if the requested
interleave ordering can be achieved by the root decoder, which isn't as
programmable as other decoders.
The algorithm implemented here is based on the CXL Type 3 Memory Device
Software Guide, chapter 2.13.14
Signed-off-by: Ben Widawsky <ben.widawsky@xxxxxxxxx>
---
Changes since v2:
- Fail earlier on lack of host bridges. This should only be capable as
of now with cxl_test memdevs.
---
.clang-format | 2 +
drivers/cxl/cxl.h | 13 +++++++
drivers/cxl/region.c | 89 +++++++++++++++++++++++++++++++++++++++++++-
3 files changed, 103 insertions(+), 1 deletion(-)
diff --git a/.clang-format b/.clang-format
index fa959436bcfd..1221d53be90b 100644
--- a/.clang-format
+++ b/.clang-format
@@ -169,6 +169,8 @@ ForEachMacros:
- 'for_each_cpu_and'
- 'for_each_cpu_not'
- 'for_each_cpu_wrap'
+ - 'for_each_cxl_decoder_target'
+ - 'for_each_cxl_endpoint'
- 'for_each_dapm_widgets'
- 'for_each_dev_addr'
- 'for_each_dev_scope'
diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
index b300673072f5..a291999431c7 100644
--- a/drivers/cxl/cxl.h
+++ b/drivers/cxl/cxl.h
@@ -81,6 +81,19 @@ static inline int cxl_to_interleave_ways(u8 eniw)
}
}
+static inline u8 cxl_to_eniw(u8 ways)
+{
+ if (is_power_of_2(ways))
+ return ilog2(ways);
+
+ return ways / 3 + 8;
+}
+
+static inline u8 cxl_to_ig(u16 g)
+{
+ return ilog2(g) - 8;
+}
+
static inline bool cxl_is_interleave_ways_valid(int iw)
{
switch (iw) {
diff --git a/drivers/cxl/region.c b/drivers/cxl/region.c
index 5588873dd250..562c8720da56 100644
--- a/drivers/cxl/region.c
+++ b/drivers/cxl/region.c
@@ -29,6 +29,17 @@
#define region_ways(region) ((region)->config.interleave_ways)
#define region_granularity(region) ((region)->config.interleave_granularity)
+#define region_eniw(region) (cxl_to_eniw(region_ways(region)))
+#define region_ig(region) (cxl_to_ig(region_granularity(region)))
+
+#define for_each_cxl_endpoint(ep, region, idx) \
+ for (idx = 0, ep = (region)->config.targets[idx]; \
+ idx < region_ways(region); ep = (region)->config.targets[++idx])
+
+#define for_each_cxl_decoder_target(dport, decoder, idx) \
+ for (idx = 0, dport = (decoder)->target[idx]; \
+ idx < (decoder)->nr_targets - 1; \
+ dport = (decoder)->target[++idx])
static struct cxl_decoder *rootd_from_region(struct cxl_region *cxlr)
{
@@ -195,6 +206,30 @@ static bool qtg_match(const struct cxl_decoder *rootd,
return true;
}
+static int get_unique_hostbridges(const struct cxl_region *cxlr,
+ struct cxl_port **hbs)
+{
+ struct cxl_memdev *ep;
+ int i, hb_count = 0;
+
+ for_each_cxl_endpoint(ep, cxlr, i) {
+ struct cxl_port *hb = get_hostbridge(ep);
+ bool found = false;
+ int j;
+
+ BUG_ON(!hb);
+
+ for (j = 0; j < hb_count; j++) {
+ if (hbs[j] == hb)
+ found = true;
+ }
+ if (!found)
+ hbs[hb_count++] = hb;
+ }
+
+ return hb_count;
+}
+
/**
* region_xhb_config_valid() - determine cross host bridge validity
* @cxlr: The region being programmed
@@ -208,7 +243,59 @@ static bool qtg_match(const struct cxl_decoder *rootd,
static bool region_xhb_config_valid(const struct cxl_region *cxlr,
const struct cxl_decoder *rootd)
{
- /* TODO: */
+ const int rootd_eniw = cxl_to_eniw(rootd->interleave_ways);
+ const int rootd_ig = cxl_to_ig(rootd->interleave_granularity);
+ const int cxlr_ig = region_ig(cxlr);
+ const int cxlr_iw = region_ways(cxlr);
+ struct cxl_port *hbs[CXL_DECODER_MAX_INTERLEAVE];
+ struct cxl_dport *target;
+ int i;
+
+ i = get_unique_hostbridges(cxlr, hbs);
+ if (dev_WARN_ONCE(&cxlr->dev, i == 0, "Cannot find a valid host bridge\n"))
+ return false;
+
+ /* Are all devices in this region on the same CXL host bridge */
+ if (i == 1)
+ return true;
+
+ /* CFMWS.HBIG >= Device.Label.IG */
+ if (rootd_ig < cxlr_ig) {
+ dev_dbg(&cxlr->dev,
+ "%s HBIG must be greater than region IG (%d < %d)\n",
+ dev_name(&rootd->dev), rootd_ig, cxlr_ig);
+ return false;
+ }
+
+ /*
+ * ((2^(CFMWS.HBIG - Device.RLabel.IG) * (2^CFMWS.ENIW)) > Device.RLabel.NLabel)
+ *
+ * XXX: 2^CFMWS.ENIW is trying to decode the NIW. Instead, use the look
+ * up function which supports non power of 2 interleave configurations.
+ */
+ if (((1 << (rootd_ig - cxlr_ig)) * (1 << rootd_eniw)) > cxlr_iw) {
+ dev_dbg(&cxlr->dev,
+ "granularity ratio requires a larger number of devices (%d) than currently configured (%d)\n",
+ ((1 << (rootd_ig - cxlr_ig)) * (1 << rootd_eniw)),
+ cxlr_iw);
+ return false;
+ }
+
+ /*
+ * CFMWS.InterleaveTargetList[n] must contain all devices, x where:
+ * (Device[x],RegionLabel.Position >> (CFMWS.HBIG -
+ * Device[x].RegionLabel.InterleaveGranularity)) &
+ * ((2^CFMWS.ENIW) - 1) = n
+ */
+ for_each_cxl_decoder_target(target, rootd, i) {
+ if (((i >> (rootd_ig - cxlr_ig))) &
+ (((1 << rootd_eniw) - 1) != target->port_id)) {
+ dev_dbg(&cxlr->dev,
+ "One or more devices are not connected to the correct hostbridge.\n");
+ return false;
+ }
+ }
+
return true;
}
--
2.35.0
