[PATCH 3/4] PCI: Add implementation for PRI capability

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Implement the necessary functions to handle PRI capabilities
on PCIe devices. With PRI devices behind an IOMMU can signal
page fault conditions to software and recover from such
faults.

Signed-off-by: Joerg Roedel <joerg.roedel@xxxxxxx>
---
 drivers/pci/Kconfig      |    9 +++
 drivers/pci/ats.c        |  167 ++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/pci-ats.h  |   42 ++++++++++++
 include/linux/pci_regs.h |   12 +++
 4 files changed, 230 insertions(+), 0 deletions(-)

diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 1d8ce83..fb1e9707 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -85,6 +85,15 @@ config PCI_IOV
 
 	  If unsure, say N.
 
+config PCI_PRI
+	bool "PCI PRI support"
+	select PCI_ATS
+	help
+	  PRI is the PCI Page Request Interface. It allows PCI devices that are
+	  behind an IOMMU to recover from page faults.
+
+	  If unsure, say N.
+
 config PCI_IOAPIC
 	bool
 	depends on PCI
diff --git a/drivers/pci/ats.c b/drivers/pci/ats.c
index 5ceff3e..bf892a0 100644
--- a/drivers/pci/ats.c
+++ b/drivers/pci/ats.c
@@ -2,9 +2,11 @@
  * drivers/pci/ats.c
  *
  * Copyright (C) 2009 Intel Corporation, Yu Zhao <yu.zhao@xxxxxxxxx>
+ * Copyright (C) 2011 Advanced Micro Devices,
  *
  * PCI Express I/O Virtualization (IOV) support.
  *   Address Translation Service 1.0
+ *   Page Request Interface added by Joerg Roedel <joerg.roedel@xxxxxxx>
  */
 
 #include <linux/pci-ats.h>
@@ -156,3 +158,168 @@ int pci_ats_queue_depth(struct pci_dev *dev)
 				       PCI_ATS_MAX_QDEP;
 }
 EXPORT_SYMBOL_GPL(pci_ats_queue_depth);
+
+#ifdef CONFIG_PCI_PRI
+/**
+ * pci_enable_pri - Enable PRI capability
+ * @ pdev: PCI device structure
+ *
+ * Returns 0 on success, negative value on error
+ */
+int pci_enable_pri(struct pci_dev *pdev, u32 reqs)
+{
+	u16 control, status;
+	u32 max_requests;
+	int pos;
+
+	pos = pci_find_ext_capability(pdev, PCI_PRI_CAP);
+	if (!pos)
+		return -EINVAL;
+
+	pci_read_config_word(pdev, pos + PCI_PRI_CONTROL_OFF, &control);
+	pci_read_config_word(pdev, pos + PCI_PRI_STATUS_OFF,  &status);
+	if ((control & PCI_PRI_ENABLE) || !(status & PCI_PRI_STATUS_STOPPED))
+		return -EBUSY;
+
+	pci_read_config_dword(pdev, pos + PCI_PRI_MAX_REQ_OFF, &max_requests);
+	reqs = min(max_requests, reqs);
+	pci_write_config_dword(pdev, pos + PCI_PRI_ALLOC_REQ_OFF, reqs);
+
+	control |= PCI_PRI_ENABLE;
+	pci_write_config_word(pdev, pos + PCI_PRI_CONTROL_OFF, control);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pci_enable_pri);
+
+/**
+ * pci_disable_pri - Disable PRI capability
+ * @pdev: PCI device structure
+ *
+ * Only clears the enabled-bit, regardless of its former value
+ */
+void pci_disable_pri(struct pci_dev *pdev)
+{
+	u16 control;
+	int pos;
+
+	pos = pci_find_ext_capability(pdev, PCI_PRI_CAP);
+	if (!pos)
+		return;
+
+	pci_read_config_word(pdev, pos + PCI_PRI_CONTROL_OFF, &control);
+	control &= ~PCI_PRI_ENABLE;
+	pci_write_config_word(pdev, pos + PCI_PRI_CONTROL_OFF, control);
+}
+EXPORT_SYMBOL_GPL(pci_disable_pri);
+
+/**
+ * pci_pri_enabled - Checks if PRI capability is enabled
+ * @pdev: PCI device structure
+ *
+ * Returns true if PRI is enabled on the device, false otherwise
+ */
+bool pci_pri_enabled(struct pci_dev *pdev)
+{
+	u16 control;
+	int pos;
+
+	pos = pci_find_ext_capability(pdev, PCI_PRI_CAP);
+	if (!pos)
+		return false;
+
+	pci_read_config_word(pdev, pos + PCI_PRI_CONTROL_OFF, &control);
+
+	return (control & PCI_PRI_ENABLE) ? true : false;
+}
+EXPORT_SYMBOL_GPL(pci_pri_enabled);
+
+/**
+ * pci_reset_pri - Resets device's PRI state
+ * @pdev: PCI device structure
+ *
+ * The PRI capability must be disabled before this function is called.
+ * Returns 0 on success, negative value on error.
+ */
+int pci_reset_pri(struct pci_dev *pdev)
+{
+	u16 control;
+	int pos;
+
+	pos = pci_find_ext_capability(pdev, PCI_PRI_CAP);
+	if (!pos)
+		return -EINVAL;
+
+	pci_read_config_word(pdev, pos + PCI_PRI_CONTROL_OFF, &control);
+	if (control & PCI_PRI_ENABLE)
+		return -EBUSY;
+
+	control |= PCI_PRI_RESET;
+
+	pci_write_config_word(pdev, pos + PCI_PRI_CONTROL_OFF, control);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pci_reset_pri);
+
+/**
+ * pci_pri_stopped - Checks whether the PRI capability is stopped
+ * @pdev: PCI device structure
+ *
+ * Returns true if the PRI capability on the device is disabled and the
+ * device has no outstanding PRI requests, false otherwise. The device
+ * indicates this via the STOPPED bit in the status register of the
+ * capability.
+ * The device internal state can be cleared by resetting the PRI state
+ * with pci_reset_pri(). This can force the capability into the STOPPED
+ * state.
+ */
+bool pci_pri_stopped(struct pci_dev *pdev)
+{
+	u16 control, status;
+	int pos;
+
+	pos = pci_find_ext_capability(pdev, PCI_PRI_CAP);
+	if (!pos)
+		return true;
+
+	pci_read_config_word(pdev, pos + PCI_PRI_CONTROL_OFF, &control);
+	pci_read_config_word(pdev, pos + PCI_PRI_STATUS_OFF,  &status);
+
+	if (control & PCI_PRI_ENABLE)
+		return false;
+
+	return (status & PCI_PRI_STATUS_STOPPED) ? true : false;
+}
+EXPORT_SYMBOL_GPL(pci_pri_stopped);
+
+/**
+ * pci_pri_status - Request PRI status of a device
+ * @pdev: PCI device structure
+ *
+ * Returns negative value on failure, status on success. The status can
+ * be checked against status-bits. Supported bits are currently:
+ * PCI_PRI_STATUS_RF:      Response failure
+ * PCI_PRI_STATUS_UPRGI:   Unexpected Page Request Group Index
+ * PCI_PRI_STATUS_STOPPED: PRI has stopped
+ */
+int pci_pri_status(struct pci_dev *pdev)
+{
+	u16 status, control;
+	int pos;
+
+	pos = pci_find_ext_capability(pdev, PCI_PRI_CAP);
+	if (!pos)
+		return -EINVAL;
+
+	pci_read_config_word(pdev, pos + PCI_PRI_CONTROL_OFF, &control);
+	pci_read_config_word(pdev, pos + PCI_PRI_STATUS_OFF,  &status);
+
+	/* Stopped bit is undefined when enable == 1, so clear it */
+	if (control & PCI_PRI_ENABLE)
+		status &= ~PCI_PRI_STATUS_STOPPED;
+
+	return status;
+}
+EXPORT_SYMBOL_GPL(pci_pri_status);
+#endif /* CONFIG_PCI_PRI */
diff --git a/include/linux/pci-ats.h b/include/linux/pci-ats.h
index 4eab42b..0713952 100644
--- a/include/linux/pci-ats.h
+++ b/include/linux/pci-ats.h
@@ -17,6 +17,7 @@ struct pci_ats {
 extern int pci_enable_ats(struct pci_dev *dev, int ps);
 extern void pci_disable_ats(struct pci_dev *dev);
 extern int pci_ats_queue_depth(struct pci_dev *dev);
+
 /**
  * pci_ats_enabled - query the ATS status
  * @dev: the PCI device
@@ -51,4 +52,45 @@ static inline int pci_ats_enabled(struct pci_dev *dev)
 
 #endif /* CONFIG_PCI_IOV */
 
+#ifdef CONFIG_PCI_PRI
+
+extern int  pci_enable_pri(struct pci_dev *pdev, u32 reqs);
+extern void pci_disable_pri(struct pci_dev *pdev);
+extern bool pci_pri_enabled(struct pci_dev *pdev);
+extern int  pci_reset_pri(struct pci_dev *pdev);
+extern bool pci_pri_stopped(struct pci_dev *pdev);
+extern int  pci_pri_status(struct pci_dev *pdev);
+
+#else /* CONFIG_PCI_PRI */
+
+static inline int pci_enable_pri(struct pci_dev *pdev, u32 reqs)
+{
+	return -ENODEV;
+}
+
+static inline void pci_disable_pri(struct pci_dev *pdev)
+{
+}
+
+static inline bool pci_pri_enabled(struct pci_dev *pdev)
+{
+	return false;
+}
+
+static inline int pci_reset_pri(struct pci_dev *pdev)
+{
+	return -ENODEV;
+}
+
+static inline bool pci_pri_stopped(struct pci_dev *pdev)
+{
+	return true;
+}
+
+static inline int pci_pri_status(struct pci_dev *pdev)
+{
+	return -ENODEV;
+}
+#endif /* CONFIG_PCI_PRI */
+
 #endif /* LINUX_PCI_ATS_H*/
diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
index e884096..7fc32af 100644
--- a/include/linux/pci_regs.h
+++ b/include/linux/pci_regs.h
@@ -663,6 +663,18 @@
 #define  PCI_ATS_CTRL_STU(x)	((x) & 0x1f)	/* Smallest Translation Unit */
 #define  PCI_ATS_MIN_STU	12	/* shift of minimum STU block */
 
+/* Page Request Interface */
+#define PCI_PRI_CAP		0x13    /* PRI capability ID */
+#define PCI_PRI_CONTROL_OFF	0x04	/* Offset of control register */
+#define PCI_PRI_STATUS_OFF	0x06	/* Offset of status register */
+#define PCI_PRI_ENABLE		0x0001	/* Enable mask */
+#define PCI_PRI_RESET		0x0002	/* Reset bit mask */
+#define PCI_PRI_STATUS_RF	0x0001  /* Request Failure */
+#define PCI_PRI_STATUS_UPRGI	0x0002  /* Unexpected PRG index */
+#define PCI_PRI_STATUS_STOPPED	0x0100  /* PRI Stopped */
+#define PCI_PRI_MAX_REQ_OFF	0x08	/* Cap offset for max reqs supported */
+#define PCI_PRI_ALLOC_REQ_OFF	0x0c	/* Cap offset for max reqs allowed */
+
 /* Single Root I/O Virtualization */
 #define PCI_SRIOV_CAP		0x04	/* SR-IOV Capabilities */
 #define  PCI_SRIOV_CAP_VFM	0x01	/* VF Migration Capable */
-- 
1.7.4.1


--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux