Re: [PATCH 19/19] PCI: Set bridge map_irq and swizzle_irq to default functions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jan 12, 2022 at 08:08:45PM +0000, Jiaxun Yang wrote:
> 在2022年1月12日一月 下午3:19,Bjorn Helgaas写道:
> > On Wed, Jan 12, 2022 at 12:57:44PM +0000, Jiaxun Yang wrote:
> >> 在2022年1月11日一月 下午9:46,Bjorn Helgaas写道:
> >> > [-cc many, +cc iproc, loongson, tegra maintainers]
> [...]
> > I see these:
> >
> >   Documentation/devicetree/bindings/pci/loongson.yaml
> >   arch/mips/boot/dts/loongson/rs780e-pch.dtsi
> >
> > which makes me think there are Loongson systems with DT.  Are there
> > some Loongson systems with DT and some legacy ones without?
> 
> Actually all present MIPS/Loongson systems are legacy and we just
> built-in DTs in kernel and select which one to use at boot time. 

So I guess you know enough about what platform it is to select which
DT to use, but you don't know enough to know the I8259 routing?

If you *could* select a DT that described the I8259 routing, I guess
maybe you could select a matching DT or update a DT in-place?

> > The only driver I see is drivers/pci/controller/pci-loongson.c.
> > Is that used for all Loongson system?  It unconditionally uses
> > ->map_irq = loongson_map_irq().
> 
> Yes, it's used among all Loongson systems.  For system using LS7A
> PCH the IRQ mapping is fixed so we just programmed it in DT. For
> RS780E we use this routine to read PCI_INTERRUPT_LINE to select
> which I8259 IRQ to use.
> 
> > loongson_map_irq() reads PCI_INTERRUPT_LINE; I think that depends
> > on firmware having previously programmed it, right?
> 
> I'm unclear about what did firmware do but as AMD RS780E is used in
> x86 PCs as well it should be the same way.

PCI devices don't use the value in PCI_INTERRUPT_LINE, and the spec
doesn't define a default value.  It's only for use by software.

I'm pretty sure that on ACPI x86, we don't depend on
PCI_INTERRUPT_LINE except for things like quirks.

I think the ACPI MADT and _PRT are supposed to contain all the INTx
routing information we need.  Obviously this isn't an ACPI system.
I'm just making the point that it *should* be possible to remove this
dependency on firmware if we can identify the specific platform (which
determines the I8259 routing).

Bjorn



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux